Physical sampling of water on site is necessary for various applications like drinking water quality checking in lakes and checking for contaminants in freshwater systems. The use of water surface vehicles is a promising technology for monitoring and sampling water bodies, and they offer several advantages over traditional monitoring methods. This project involved designing and integrating a drone controller, water collection sampling contraption unit, and a surveillance camera system into a water surface vehicle (WSV). The drone controller unit is used to operate the boat from the starting location until the location of interest and then back to the starting location. The drone controller has an autopilot system where the operator can set a course and be able to travel following the path set, whereas the WSV will fight the external forces to keep itself in the right position. The water collection sampling unit is mounted onto WSV so when it travels to the location, it can start collecting and holding water samples until it returns to the start location. The field of view (FOV) surveillance camera helps the operator to observe the surrounding location during the operation. Experiments were conducted to determine the operational capabilities of the robot boat at the Ayer Keroh Lake. The water collection sampling contraption unit collected samples from 44 targeted areas of the lake. The comprehensive examination of 14 different water quality parameters were tested from the collected water samples provides insights into the factors influencing the pollution and observation of water bodies. The successful design and development of a water surface surveillance and pollution tracking vehicle marks the key achievements of this study. The developed collection and surveillance unit holds the potential for further refinement and integration onto various other platforms. They are offering valuable assistance in water body management, coastal surveillance, and pollution tracking. This system opens up new possibilities for comprehensive water body assessments, contributing to the advancement of sustainable and efficient water testing. Through careful sampling efforts, a thorough overview of the substances presents in the water collected from Ayer Keroh Lake has been compiled. This in-depth analysis provides important insights into the lake’s current condition, offering valuable information about its ecological health.

Urban mobility in Grand Lomé is affected by several negative externalities, including road congestion, insecurity and environmental pollution. Traffic jams cause considerable economic losses, estimated at more than 13,000 CFA francs per month for some public officials, and represent a financial drain of several million CFA francs per day on the Togolese economy. These challenges are accentuated by rapid urbanization and a dizzying increase in the number of vehicles, especially motorcycle taxis. These factors not only cause economic losses, but also to the deterioration of the quality of life of the inhabitants. On average, motorists lose up to 49.5 min per day in traffic jams, with fuel and time costs estimated at hundreds of thousands of CFA francs per year for each user of the main boulevards. Through an in-depth analysis of the impacts of these negative externalities on mobility and sustainable development, this study reveals that traffic congestion, combined with the lack of road infrastructure, generates considerable economic and environmental costs. These traffic jams also worsen air pollution, making the transport sector responsible for 80% of greenhouse gas emissions. These proposed solutions include: 1) The modernization of road infrastructure, culminating in the construction of new lanes entirely dedicated to public and non-motorized transport. 2) The regulation of motorcycle taxis, inspired by regional examples, to improve safety and efficiency. 3) The introduction of rapid transit systems, such as Bus Rapid Transit (BRT), to make travel more fluid. 4) The implementation of strict environmental standards and regular technical controls to reduce greenhouse gas emissions. These proposals aim to reduce social and economic costs, while promoting sustainable mobility and a better quality of life for residents.

This paper aims to systematically analyze the current state of plastic waste legal supervision in China and to propose a vision for future governance frameworks. In recent years, along with the vigorous rise of emerging industries such as the express delivery industry and takeaway services, the consumption of plastic products has increased sharply. This trend has triggered profound reflection and high vigilance on the issue of plastic waste supervision. This trend has triggered profound reflection and acute vigilance regarding the regulation of plastic waste. Although the Chinese government has initiated multiple regulatory measures and achieved certain outcomes, from a macroscopic perspective, the issue of plastic waste pollution remains grave, and the relevant legal and regulatory system presents a complex situation with limited enforcement efficacy. Hence, it is exceptionally urgent and significant to deeply explore and formulate legislative strategies aimed at alleviating and regulating plastic waste pollution. This paper is dedicated to systematically analyzing the current state of plastic waste legal supervision from both international and domestic dimensions, and meticulously outlining the regulatory framework for plastic waste governance in China. Through the application of legal norm research methods, this paper dissects the flaws and challenges existing in the current governance mechanisms and further conducts a comparative study of the successful practices in this field in developed countries like the United States, with the intention of drawing valuable experiences. On this basis, this paper not only offers a forward-looking outlook on China’s future legislative tendencies in plastic waste pollution but also innovatively proposes a series of new insights and recommendations. These explorations aim to provide a more solid theoretical foundation and practical guidance for the governance approach to plastic waste pollution in China, promote the improvement and enhancement of the enforcement effectiveness of environmental regulations, and thereby effectively confront the global challenge of plastic pollution.

Noise pollution in construction sites is a significant concern, impacting worker health, safety, communication, and productivity. The current study aims to assess the paramount consequences of ambient noise pollution on construction activities and workers’ productivity in Peshawar, Pakistan. Noise measurements have been recorded at four different construction sites in Peshawar at different times of the day. Statistical analysis and Relative Importance Index (RII) are employed to evaluate the data Risk variables, such as equipment maintenance, noise control, increased workload, material handling challenges, quality control issues, and client satisfaction. The results indicated that noise levels often exceeded permissible limits, particularly in the afternoon, posing significant worker risks. In addition, RII analysis identified communication difficulties, safety hazards, and decreased productivity as significant issues. The results show that noise pollution is directly linked with safety risks, decreased performance, and client dissatisfaction and needs immediate attention by authorities. This paper proposes a strategic policy framework, recommending uniform hand signals and visual communication methods without noise for workers, worker training about safety, and using wearable devices in noisy settings. Communication training for teams and crane operators, proactive quality control, and customer-oriented project schedules are also proposed. These recommendations aim to mitigate the adverse effects of noise pollution, enhance construction industry resilience, and improve overall operational efficiency, worker safety, and client satisfaction in the construction sector of Peshawar, aligning with policy and sustainable development objectives.

The following paper assesses the relationship between electricity consumption, economic growth, environmental pollution, and Information and Communications Technology (ICT) development in Kazakhstan. Using the structural equation method, the study analyzes panel data gathered across various regions of Kazakhstan between 2014 and 2022. The data were sourced from official records of the Bureau of National Statistics of Kazakhstan and include all regions of Kazakhstan. The chosen timeframe includes the period from 2014, which marked a significant drop in oil prices that impacted the overall economic situation in the country, to 2022. The main hypotheses of the study relate to the impact of electricity consumption on economic growth, ICT, and environmental sustainability, as well as ICT’s role in economic development and environmental impact. The results show electricity consumption’s positive effect on economic growth and ICT development while also revealing an increase in pollutant emissions (emissions of liquid and gaseous pollutants) with economic growth and electricity consumption. The development of ICT in Kazakhstan has been revealed to not have a direct effect on reducing pollutant emissions into the environment, raising important questions about how technology can be leveraged to mitigate environmental impact, whether current technological advancements are sufficient to address environmental challenges, and what specific measures are needed to enhance the environmental benefits of ICT. There is a clear necessity to integrate sustainable practices and technologies to achieve balanced development. These results offer important insights into the relationships among electricity consumption, technology, economic development, and environmental issues. They underscore the complexity and multidimensionality of these interactions and suggest directions for future research, especially in the context of finding sustainable solutions for balanced development.