We report on the measurement of the response of Rhodamine 6G (R6G) dye to enhanced local surface plasmon resonance (LSPR) using a plasmonic-active nanostructured thin gold film (PANTF) sensor. This sensor features an active area of approximately ≈ 2.5 × 10¹³ nm² and is immobilized with gold nanourchins (GNU) on a thin gold film substrate (TGFS). The hexane-functionalized TGFS was immobilized with a 90 nm diameter GNU via the strong sulfhydryl group (SH) thiol bond and excited by a 637 nm Raman probe. To collect both Raman and SERS spectra, 10 μL of R6G was used at concentrations of 1 μM (6 × 10¹² molecules) and 10 mM (600 × 10¹⁴ molecules), respectively. FT-NIR showed a higher reflectivity of PANTF than TGFS. SERS was performed three times at three different laser powers for TGFS and PANTF with R6G. Two PANTF substrates were prepared at different GNU incubation times of 10 and 60 min for the purpose of comparison. The code for processing the data was written in Python. The data was filtered using the filtfilt filter from scipy.signals, and baseline corrected using the Improved Asymmetric Least Squares (ISALS) function from the pybaselines.Whittaker library. The results were then normalized using the minmax_scale function from sklearn.preprocessing. Atomic force microscopy (AFM) was used to capture the topography of the substrates. Signals exhibited a stochastic fluctuation in intensity and shape. An average corresponding enhancement factor (EF) of 0.3 × 10⁵ and 0.14 × 10⁵ was determinedforPANTFincubated at 10 and 60 min, respectively.

The study aims to investigate and analyse the social media, precisely the Instagram activity of several hotels in the city of Yogyakarta, Indonesia. Having been the second most popular destination besides Bali, it is mainly dominated by domestic tourism. Although several governmental institutions exist, the study focuses on the hotel’s activity only. The main purpose was to find, that after the classification of the posts, whether there is a more positive effect of one as opposed to the other type of posts. In addition, it was also important to see if with the time advancing positive effect of likes and comments appear and the relation of hashtags, likes and comments. Data was collected between 1st of January 2023. and 15th of July 2024. The first step was to collect posts done by the suppliers and then the posts were classified. Also, the number of hashtags used were collected. Second step was to collect the response from the demand side by gathering their likes and comments. Data then was analysed with SPSS 24 and JASP program. Results show that while there is no significance on increasing likes and comments with the months advancing, but in terms of the type of the posts there is. Promotional posts with other suppliers tend to bring a lot more comments and likes than self-promotional posts. This study’s main purpose to analyse through social media posts to enhance online networking by local suppliers promoting each other’s products.

In response to the challenges of climate change, this study explores the use of moringa pod powder as reinforcement in the manufacture of compressed earth bricks to promote sustainable building materials. The objective is to evaluate the impact of African locust bean pod powder on the mechanical properties of the bricks. Two types of soils from Togo were characterized according to geotechnical standards. Mixtures containing 8% African locust bean pod powder at various particle sizes (0.08 mm, 2 mm, and between 2 and 5 mm) were formulated and tested for compression and tensile strength. The results show that the addition of African locust bean pod reduces the mechanical strength of the bricks compared to the control sample without pods, with strengths ranging from 0.697 to 0.767 MPa, compared to 0.967 to 1.060 MPa for the control. However, the best performances for the mixtures were obtained with a fineness of less than 2 mm. This decrease in performance is attributed to several factors, including inadequate water content and suboptimal preparation and compaction methods. Optimizing formulation parameters is necessary to maximize the effectiveness of African locust bean pods. This work highlights the valorization of agro-industrial waste, paving the way for a better understanding of bio-based materials and future research for sustainable construction.

The present research focuses on researching the impact of the diverse communication media that facilitate or develop Student Motivation and Engagement in the educational systems of the states in the Gulf, especially Oman. The main goal of this work is to determine which type of method is most effective in encouraging students in view of cultural and technological factors present in the region. Comparisons using hypothesis testing and structural models which provided higher T value for Technology-Based Communication Methods (TBCM) and Human Face-to-Face Communication Methods (HFtFCM). Next, the research hypothesis H2 that TBCM has a direct positive relationship with SMaE was supported by the following regression coefficients: β = 0.177, t = 4.493; p = 0.000. On the other hand, there was no effect of HFtFCM on SMaE as indicated by a regression coefficient of 0.056 (p < 0.124) for this hypothesis and therefore, this hypothesis was rejected. The analysis using the mediator of Student Perception of Communication Effectiveness (SPoCE) only partly mediates TBCM and SMaE (β = 0.047, t = 3.737, p = 0.000). However, SPoCE was found not to moderate the relationship between HFtFCM and SMaE (β = −0.01, t = 1.125, p = 0.005). The present study underlines the efficiency of TBCM in the area of student engagement, while face-to-face conversation does not play significant part in this process. The obtain results conclude that, the traditional and technological evolution in the Gulf region supports the adoption of TBCM in educational systems. Such approaches support with the technological learning and likings of students, offering greater flexibility and engagement. Educational systems must highlight TBCM to better meet the growing needs of their student, while identifying that face-to-face remains important, though secondary, in energetic motivation.

As a product of the integration of AI technology and media, the debate surrounding the potential replacement of human anchors by AI anchors has persisted since their inception. This paper conducts a systematic literature review of research on AI anchors in China from 2000 to 2023, grounded in theories of personalization within the field of communication studies. The analysis aims to compare the differences in personalized representation between AI anchors and human anchors, summarizing the advancements, challenges, and future directions of AI anchor communication based on personality. This contribution seeks to enhance the existing knowledge base surrounding AI anchor research.

To address gaps in practical skills among Public Health and Preventive Medicine graduates, an ‘open collaborative practice teaching model’ integrating medicine, teaching, and research was introduced. A cross-sectional study surveyed 312 Preventive Medicine undergraduates at a Yunnan medical university from 2020 to 2023, utilizing satisfaction scores and analyses (cluster, factor, SWOT) to assess the impact of the reform. Satisfaction scores from baseline, mid-term, and end-term assessments showed minor variations (4.30, 4.29, 4.36), with dissatisfaction primarily related to teaching content and methods. Key influences on satisfaction included teaching content, methods, and effectiveness. The SWOT analysis highlighted the importance of continuously updating teaching strategies to meet changing student expectations. This study suggests that the model has the potential for wider use in enhancing public health education, particularly in regions facing similar challenges.