Introduction: Many detrimental effects on employees’ health and wellbeing might result from inadequate illumination in the workplace. Headaches and trouble focusing can result from eye strain brought on by inadequate illumination. The purpose of this study was to simulate and optimize workplace illumination in the ceramic industry. Materials and methods: A common Luxmeter ST-1300 was used to measure the illumination in seven workplaces at a height of 100 cm above the floor. DIALux evo version 7.1 software was used to simulate the illumination of workplaces. To optimize the illumination conditions, a numerical experiment design consisting of 16 scenarios was used for each of the workplaces. Four factors were considered for each scenario: luminaire height, number of luminaires, luminous flux, and light loss factor. The Design-Expert program version 13.0.5.0 was applied for developing the scenarios. Finally, by developing quadratic models for each workplace, the optimization process was implemented. Results: Every workplace had illumination levels that were measured to be between 250 and 300 lux. Instead of using compact fluorescent luminaires, LED technology was recommended to maximize the illumination conditions for the workers. Following optimization, 376 lux of illumination were visible at each workstation in every workspace. For the majority of the workspaces, the simulated illumination was expected to have a desirability degree greater than 0.9. The uniformity and illumination of the workplace were significantly impacted by the two factors of luminaire height and luminaire count. Conclusion: The primary outcomes of this optimization were the environmental, political, and socioeconomic ones, including reduced consumption power, high light flux, and environmental compatibility. Nonetheless, the optimization technique applied in this work can be applied to the design of similar situations, such as residential infrastructure.

This article refers to Hallstatt in Austria and Ioannina in Greece. The goals analyze the two locations that have similarities in geometric shape, digital elevation model (DEM), and geomorphology. Firstly, Hallsatt’s advances were more technical than aesthetic. There is a general tendency towards extravagance and baroque and Greco-Oriental influences. Secondly, Ioannina is a mountainous city located around Lake Pamvotis. The geometry develops parallel to the lake. The city experiences many cultures. The ancient city had an urban planning that characterized the Ottoman Empire. In the old part, there is the castle, old stone streets, wooden houses, and the house of the Greek Muslim Ali Pasha. The author obtains numerous aerial photographs using Google Earth software. The photographs were received dynamically for all the perimeters of the regions. In short, the cartographer has between 15 and 20 photographs. The next step is to align the photographs in Zephyr photogrammetry software. Configuring resolutions, distance, camera locations, contrast, and brightness is essential. The final products are the 3D texture, 3D model, and orthophotos from Hallstatt and Ioannina. Digital products are suitable for measuring areas, circumferences, and heights. Furthermore, digital products represent a digital archiving practice: conservation and visualization are crucial factors today as they share, represent, promote, and document urban planning, historical memory, and the natural environment.

Map is the basic language of geography and an indispensable tool for spatial analysis. But for a long time, maps have been regarded as an objective and neutral scientific achievement. Inspired by critical geography, critical cartography/GIS came into being with the goal of clarifying the discourse embedded in cartographic practice. Power relationship challenges the untested assumption in map representation that is taken for granted. After more than 40 years of debate and running in, this research field has initially shown an outline, and critical cartography/GIS has roughly formed two research directions: the deconstruction path mainly starts from the identity of cartography subject and the process of map knowledge production, and analyzes the inseparable relationship between cartography and national governance and its internal power mechanism respectively; the construction path mainly relies on cooperative mapping and anti-mapping to realize the reproduction of map data. Domestic critical cartography/GIS research has just started, and it is necessary to continue to absorb the achievements of critical geography and carry out research in different historical periods. The deconstruction research of different types of maps also needs to strengthen the in-depth bridging between the construction path and the deconstruction path, and to be more open to the public. Impartial map application research, and actively apply the research results to social practice.

Marine geological maps of the Campania region have been constructed both to a 1:25.000 and to a 1:10.000 scale in the frame of the research projects financed by the Italian National Geological Survey, focusing, in particular, on the Gulf of Naples (Southern Tyrrhenian Sea), a complex volcanic area where volcanic and sedimentary processes strongly interacted during the Late Quaternary and on the Cilento Promontory offshore. In this paper, the examples of the geological sheets n. 464 “Isola di Ischia” and n. 502 “Agropoli” have been studied. The integration of the geological maps with the seismo-stratigraphic setting of the study areas has also been performed based on the realization of interpreted seismic profiles, providing interesting data on the geological setting of the subsurface. The coastal geological sedimentation in the Ischia and Agropoli offshore has been studied in detail. The mapped geological units are represented by: i) the rocky units of the acoustic basement (volcanic and/or sedimentary); ii) the deposits of the littoral environment, including the deposits of submerged beach and the deposits of toe of coastal cliff; iii) the deposits of the inner shelf environment, including the inner shelf deposits and the bioclastic deposits; iv) the deposits of the outer shelf environment, including the clastic deposits and the bioclastic deposits; v) the lowstand system tract; vi) the Pleistocene relict marine units; vii) different volcanic units in Pleistocene age. The seismo-stratigraphic data, coupled with the sedimentological and environmental data provided by the geological maps, provided us with new insights on the geologic evolution of this area during the Late Quaternary.

This article examines migration as a complex social phenomenon using innovative pedagogical tools such as Story Maps and virtual ethnography. the study focuses on how these tools enhance the learning process by integrating Paulo Freire’s critical pedagogy. Original empirical data was collected from student feedback and reflective exercises, demonstrating enhanced critical thinking and engagement. The study also highlights the challenges posed by technological access inequalities, emphasizing the need for equitable solutions.