Diamond-like Nanocomposites (DLN) is a newly member in amorphous carbon (a:C) family. It consists of two or more interpenetrated atomic scale network structures. The amorphous silicon oxide (a:SiO) is incorporated within diamond-like carbon (DLC) matrix i.e. a:CH and both the network is interpenetrated by Si-C bond. Hence, the internal stress of deposited DLN film decreases remarkably compare to DLC. The diamond-like properties have come due to deform tetrahedral carbon with sp³ configuration and high ratio of sp³ to sp² bond. The DLN has excellent mechanical, electrical, optical and tribological properties. Those properties of DLN could be varied over a wide range by changing deposition parameters, precursor and even post deposition treatment also. The range of properties are: Resistivity 10^-4 to 10¹⁴ Ωcm, hardness 10–22 GPa, coefficient of friction 0.03-0.2, wear factor 0.2-0.4 10^-7mm³/Nm, transmission Vis-far IR, modulus of elasticity 150-200 GPa, residual stress 200-300 Mpa, dielectric constant 3-9 and maximum operating temperature 600^°C in oxygen environment and 1200^°C in O₂ free air. Generally, the PECVD method is used to synthesize the DLN film. The most common procedures used for investigation of structure and composition of DLN films are Raman spectroscopy, Fourier transformed infrared spectroscopy (FTIR), HRTEM, FESEM and X-ray photo electron spectroscopy (XPS). Interest in the coating technology has been expressed by nearly every industrial segment including automotive, aerospace, chemical processing, marine, energy, personal care, office equipment, electronics, biomedical and tool and die or in a single line from data to beer in all segment of life. In this review paper, characterization of diamond-like nanocomposites is discussed and subsequently different application areas are also elaborated.

COVID-19 has led to abrupt changes in work norms and practices. Despite receding pandemic restrictions, the popularity of remote or hybrid work has not subsided. As employees around the world continue to call for more flexibility and autonomy in the way they work, human resource leaders must continuously consider and evaluate decisions based on ever-changing sentiment, balancing the interests of employees and employers alike. In this perspective article, we review the current state of work in the Southeast Asian region, focusing on Malaysia, Singapore, Indonesia, the Philippines, and Thailand, and present preliminary results from a region-wide mental health assessment that was conducted in late 2022. We argue for the continuation of hybrid work in the region and elaborate on the mental health risks that come with remote working.

Helical deep hole drilling is a process frequently used in industrial applications to produce bores with a large length to diameter ratio. For better cooling and lubrication, the deep drilling oil is fed directly into the bore hole via two internal cooling channels. Due to the inaccessibility of the cutting area, experimental investigations that provide information on the actual machining and cooling behavior are difficult to carry out. In this paper, the distribution of the deep drilling oil is investigated both experimentally and simulatively and the results are evaluated. For the Computational Fluid Dynamics (CFD) simulation, two different turbulence models, i.e. the RANS k-ω-SST and hybrid SAS-SST model, are used and compared. Thereby, the actual used deep drilling oil is modelled instead of using fluid dynamic parameters of water, as is often the case. With the hybrid SAS-SST model, the flow could be analyzed much better than with the RANS k-ω-SST model and thus the processes that take place during helical deep drilling could be  simulated with realistic details. Both the experimental and the simulative results show that the deep drilling oil movement is almost exclusively generated by the tool rotation. At the tool’s cutting edges and in the flute, the flow velocity drops to zero for the most part, so that no efficient cooling and lubrication could take place there. In addition, cavitation bubbles form and implode, concluding in the assumption that the process heat is not adequately dissipated and the removal of chips is adversely affected, which in turn can affect the service life of the tool and the bore quality. The carried out investigations show that the application of CFD simulation is an important research instrument in machining technology and that there is still great potential in the area of tool and process optimization.

This study analysed the behaviour of both economic and financial profitability of credit unions belonging to segment 1 in Ecuador, as well as its determinants. For this purpose, data from the financial statements of a sample of 30 credit unions between 2016 and 2022 were used by means of a multiple linear regression methodology using panel data with fixed effects after applying the Hausman test. The findings of this research showed that current liquidity and non-performing loans have a negative and significant effect on both economic and financial profitability while the past due portfolio has a positive and significant impact on the generation of profitability of the financial institutions under study. In addition, it was revealed that the rate of outflow absorption has a negative relationship with economic profitability but a positive relationship with financial profitability. Unlike previous research in the Ecuadorian context, this research is pioneering in presenting results that indicate that the determinants traditionally considered for nonfinancial institutions and banks are also valid for credit unions, even though they are organisations with different characteristics from the rest.

A The meaning of life is the purpose that defines a person’s existence based on a set of fundamental objectives that give meaning to life or not. Furthermore, not all individuals have a meaning in life, and it may be absent at some point or stage of life. Objective: To analyze Peruvian older adults’ socioeconomic factors and the meaning of life. Method: A descriptive, comparative, quantitative cross-sectional study was conducted. One thousand older adults were intentionally selected through quotas of 100 older adults in 10 localities in Arequipa, Peru. They were administered a survey validated with high levels of reliability on the meaning of life and socioeconomic factors. Results: A moderate level of meaning in life was found. Most older adults believe that increasing age decreases the purpose of living, and existential emptiness grows. Conclusions: Statistically significant differences (p < 0.05) were found between the meaning of life and the following socioeconomic factors: retirement, religion, educational level, cohabitation, marital status, income, and occupation. It is understood that older adults who scored higher on these factors indicate having meaning in life because they still fulfill the role of providers for the family economy, being util to their families compared to the majority who scored low, which indicates an absence of meaning of life leading to an increase existential void.

This bibliometric review evaluates the research progress and knowledge structure regarding the impact of supporting facilities on halal tourism development. Using the Scopus database and bibliometric analysis with the “bibliometrix” package in R, the study covers the period from 2016 to 2023. The search, employing keywords like “halal tourism,” “facilities,” “infrastructure,” and “local support,” identified 26 relevant publications. The findings highlight a limited body of research, with the Journal of Islamic Marketing being the most active publisher in this area, contributing six articles. Indonesia emerges as a leading contributor to halal tourism research, driven by its significant Muslim population and the economic potential of this niche market. Key facilities, such as mosques, musholla, and high-quality halal food options, are identified as crucial factors influencing Muslim travelers’ destination choices. This review provides a comprehensive overview of the current research landscape on supporting facilities in halal tourism and highlights opportunities for future investigation to further enrich the field.