ZrO₂ thin film samples were produced by the sol-gel dip coating method. Four different absorbed dose levels (such as ~ 0.4, 0.7, 1.2 and 2.7 Gray-Gy) were applied to ZrO₂ thin films. Hence, the absorbed dose of ZrO₂ thin film was examined as physical dose quantity representing the mean energy imparted to the thin film per unit mass by gamma radiation. Modification of the grain size was performed sensitively by the application of the absorbed dose to the ZrO₂ thin film. Therefore the grain size reached from ~50 nm to 87 nm at the irradiated ZrO₂ thin film. The relationship of the grain size, the contact angle, and the refractive index of the irradiated ZrO₂ thin film was investigated as being an important technical concern. The irradiation process was performed in a hot cell by using a certified solid gamma ray source with 0.018021 Ci as an alternative technique to minimize the utilization of extra toxicological chemical solution. Antireflection and hydrophilic properties of the irradiated ZrO₂ thin film were slightly improved by the modification of the grain size. The details on the optical and structural properties of the ZrO₂ thin film were examined to obtain the optimum high refractive index, self-cleaning and anti-reflective properties.

Due to its physicochemical properties, nanoparticles titanium dioxide (nTiO₂) is being put into mass production and widespread applications, which inevitably results in their increasing exposure to the water body. After it entering the water body, the chemical properties of nTiO₂ can be influenced by ion compositions, ion strength and pH, which affects their ecological risk. Excess of ammonium (NH₄⁺) fertilizer has contaminated soil and water environments. In this paper, the Zeta potentials and hydrodynamic radius of nTiO₂ were studied in NH₄⁺ solution compared to those in Na⁺ solution. In addition, the sedimentation rate of nTiO₂ was also investigated. The experiment results show that high pH inhibits the sedimentation of nTiO₂. Moreover, NH₄⁺ increases the stability of nTiO₂ more than Na⁺ at the same IS, which was attributed the more negative Zeta potentials and the smaller hydraulic radius. Our results provide a theoretical basis for evaluating the ecological risk of nTiO₂ in aqueous solution containing NH₄⁺.

The micro staring hyperspectral imager can simultaneously acquire two spatial and one spectral images, and only record the external orientation elements of the entire hyperspectral image rather than the external orientation elements of each frame of the image, which avoids the geometric instability during scanning, effectively solves the problem of large geometric deformation of the small line scanning hyperspectral imager, and is suitable for the small UAV load platform with unstable attitude. At present, most of the research focuses on the radio-metric correction method of line scan hyperspectral imager. The application time of staring hyperspectral imager is short, and there is no mature data processing re-search at home and abroad, which hinders the application of UAV micro staring hyperspectral imaging system. In this paper, the calibration method of the linearity and variability of the radiation response of the micro staring hyperspectral imager on the UAV is studied, and the effectiveness of this method is quantitatively evaluated. The results show that the hyperspectral image has obvious vignetting effect and strip phenomenon before the correction of radiation response variability. After the correction, the radiation response variation coefficient of pixels in different bands decreases significantly, and the vignetting effect and image strip decrease significantly. In this paper, a multi-target radiometric calibration method is proposed, and the accuracy of radiometric calibration is verified by comparing the calibrated hyperspectral image spectrum with the measured ground object spectrum of the ground spectrometer. The results show that the calibration results of the multi-target radiometric calibration method show better results, especially for the near-infrared band, and the difference with the surface reflectance measured by the spectrometer is small.

During the early spring in the woodlands of eastern North America, Phlox drummondii emerges as a perennial plant adorned with a profusion of blooms in shades of blue, purple, pink, or white. Its evergreen nature adds to its charm. To manage the growth of plants or specific plant parts, plant growth regulators (PGRs) are synthesized and employed, serving as valuable tools for controlling and directing the development of various plant species. A diverse range of ornamental plants, such as Phlox drummondii, have been documented to receive exogenous applications of plant growth regulators (PGRs). Among these regulators, gibberellins (GA) play a vital role by delaying senescence in flowers and promoting the breaking of dormancy in seeds, bulbs, and corms of ornamental plants. The experiment aimed to assess the performance and determine the optimal growth medium for Phlox. Five distinct growth media were employed as treatments during the study, which took place in the Horticulture Department of Gomal University. Collected data underwent analysis through ANOVA and Tuckey HSD tests. The study’s findings revealed that the highest plant height (16 cm) was observed in the control treatment with PGR 1, closely followed by PGR 2 (11.5 cm). The treatment labeled as T5, composed of a mixture of 1/3 sand, 1/3 poultry manure, and 1/3 soil, demonstrated the most favorable results across multiple parameters such as bud initiation (BI), first flower emergence (FFE), flowers per plant (FPP), branches per plant (BPP), leaves per plant (LPP), number of roots (NR), field life of flowers (FLF), and flower diameter (FD). T4, T3, T2, and T1 treatments also exhibited similar positive outcomes, aligning with the promising performance of T5.

Corporate social responsibility (CSR) is an important concept of modern economic theory. In the last few decades, it has become an increasingly popular marketing tool used by companies. Consumers too want to see more CSR activities, especially those focused on environmental protection. The petroleum industry produces both toxic and non-toxic waste at almost all stages of production. While petroleum companies satisfy market demand, they also want to meet consumers’ moral and ethical demands. In this light, CSR has become vital for the development of industry. This paper looks at CSR in the petroleum industry, and its effect on customer satisfaction and subsequently toward the customer repurchase intention in Malaysia. The starting point of this paper is the Stakeholder Theory. It then examines CSR endeavors within the oil and gas sector and its link to customer repurchase intentions. It also looks at the established hypotheses between the activities of CSR (Economic Responsibility, Legal Responsibility, Ethical Responsibility, Philanthropic Responsibility), customer satisfaction and repurchase intention. This paper aims to learn about the customer’s sense of fulfilment with the CSR activities, and what could be the reaction base on the customer’s expectation.

With the rapid development of modern science and technology, various new technologies have also emerged. In this environment, new requirements are put forward for the teaching of high-frequency electronic circuits. It is necessary to keep up with the development trend of the times and carry out course teaching reforms.