Solid waste has become a major environmental concern globally in recent years due to the tremendous increase in waste generation. However, these wastes (e.g., plastics and agro-residues) can serve as potential raw materials for the production of value-added products such as composites at low cost. The utilization of these waste materials in the composite industry is a good strategy for maintaining the sustainability of resources with economic and environmental benefits. In this report, the environmental impacts and management strategies of solid waste materials are discussed in detail. The study described the benefits of recycling and reusing solid wastes (i.e., plastic and agro-waste). The report also reviewed the emerging fabrication approaches for natural particulate hybrid nanocomposite materials. The results of this survey reveal that the fabrication techniques employed in manufacturing composite materials could significantly influence the performance of the resulting composite products. Furthermore, some key areas have been identified for further investigation. Therefore, this report is a state-of-the-art review and stands out as a guide for academics and industrialists.

This paper presents the state of displacement of a multilayered composite laminate subjected to transverse static load with varying balance, symmetric and anti-symmetric angle-ply and cross-ply staking sequences. Higher-order shear deformation theory (HSDT) is considered in the finite element formulation of nine-noded isoparametric element with seven degrees of freedom at each node. The finite element formulation is transformed into computer codes. A convergence study is carried out first to obtain the optimal mesh size for minimizing the computational time. The maximum deflection at the center of plate for both fixed and simply supported edges is verified with reported literature and a good conformity is found. An attempt has been made to observe the minimum value of maximum deflection in the laminate for attaining the maximum strength of laminate with a suitable combination of stacking sequences with a constant volume of material.

Attempts were made in the present study to design and develop skeletally modified ether linked tetraglycidyl epoxy resin (TGBAPSB), which is subsequently reinforced with different weight percentages of amine functionalized mullite fiber (F-MF). The F-MF was synthesized by reacting mullite fiber with 3-aminopropyltriethoxysilane (APTES) as coupling agent and the F-MF structure was confirmed by FT-IR. TGBAPSB reinforced with F-MF formulation was cured with 4,4’-diamino diphenyl methane (DDM) to obtain nanocomposite. The surface morphology of TGBAPSB-F-MF epoxy nanocomposites was investigated by XRD, SEM and AFM studies. From the study, it follows that these nanocomposite materials offer enhancement in mechanical, thermal, thermo-mechanical, dielectric properties compared to neat (TGBAPSB) epoxy matrix. Hence we recommend these nanocomposites for a possible use in advanced engineering applications that require both toughness and stiffness.

The mining issue’s real-world impact is directly linked to the insufficient policing efforts by relevant institutions, potentially affecting the credibility of law enforcement agencies and regional performance. This research project sought to evaluate policing performance related to mining activities in Indonesian regional areas. Using an indexing method, a composite index was developed based on supervision, partnership, and law enforcement aspects. This index functioned as a representation of policing within the mining and quarrying context. The evaluation was carried out in Indonesian provinces with active mining and quarrying operations. The composite index was then juxtaposed with regional gross domestic products to gauge the correlation between policing and regional economic performance. Results revealed that regions heavily reliant on mining for regional GDP, like East Kalimantan, South Sumatera, and Papua, tended to have lower policing indices due to shortcomings in supervision and law enforcement. Conversely, regions with stronger policing indices typically excelled in the supervisory dimension, as seen in Yogyakarta. The study suggests that engaging with communities and increasing the ratio of mine inspectors to mine areas can enhance mining governance and regional competitiveness. Boosting the number of mine inspectors in specific areas can also positively impact overall policing activities within mining regions.