Modelling and simulation have now become standard methods that serve to cut the economic costs of R&D for novel advanced systems. This paper introduces the study of modelling and simulation of the infrared thermography process to detect defects in the hydroelectric penstock. A 3-D penstock model was built in ANSYS version 19.2.0. Flat bottom holes of different sizes and depths were created on the inner surface of the model as an optimal scenario to represent the subsurface defect in the penstock. The FEM was applied to mimic the heat transfer in the proposed model. The model’s outer surface was excited at multiple excitation frequencies by a sinusoidal heat flux, and the thermal response of the model was presented in the form of thermal images to show the temperature contrast due to the presence of defects. The harmonic approximation method was applied to calculate the phase angle, and its relationship with respect to defect depth and defect size was also studied. The results confirmed that the FEM model has led to a better understanding of lock-in infrared thermography and can be used to detect subsurface defects in the hydroelectric penstock.

Objective: To evaluate the imaging features of spondyloarthritis on magnetic resonance imaging (MRI) of the sacroiliac (SI) joints in terms of topography (in thirds) and affected margin, since this aspect is rarely addressed in the literature. Methods: Cross-sectional study with MRI (1.5 T) evaluation of the SI in 16 patients with diagnosis of axial spondyloarthritis regarding the presence of acute (subchondral bone edema, enthesitis, synovitis and capsulitis) and chronic changes (erosions, subchondral bone sclerosis, bone bridging and fatty replacement), performed by two radiologists, blinded to clinical data. MRI findings were correlated with clinical data including age, disease duration, medications, HLA-B27, BASDAI, ASDAS-VHS and ASDAS-PCR, BASMI, BASFI, and mSASSS. Results: Bone edema pattern and erosions showed predominance in the upper third of SI (p = 0.050, p = 0.0014, respectively). There was a correlation between the time of disease and structural changes by affected third (p = 0.028-0.037), as well as the presence of bone bridges with BASMI (p = 0.028) and mSASSS (p = 0.014). Patients with osteitis of the lower third had higher ASDAS values (ESRV: p = 0.011 and CRP: p = 0.017). Conclusion: Chronic inflammatory changes and the pattern of bone edema predominated in the upper third of the SI, but there was also concomitant involvement of the middle or lower thirds of the joint. The localization of involvement in the upper third of the SI was insufficient to differentiate between degeneration and inflammation.

The danger of riverbed processes is considered. Their speed varies from the first few months of the flood to the most dynamic process in nature. It happened in front of people. This may make life on the river bank and the utilization of river resources more difficult. This paper introduces the causes and consequences of the danger performance of riverbed processes, and focuses on the mapping methods of the danger assessment of riverbed processes: determining the danger degree of riverbed processes and different methods of displaying it on the map. An example of displaying danger on the previously drawn map is given, and the distribution of different types and expression degrees of dangerous riverbed processes under various natural conditions in Russia is briefly analyzed.

This study examines the rapid convergence of the tourism industry with other sectors, driven by the expanding experience economy. A conceptual model was introduced encompassing industry convergence patterns, paths, and effects to assess this convergence’s effectiveness. Using a survey of 392 tourists in Macau, these findings reveal that the tourism industry convergence path and mode positively influence the convergence effect, thereby shaping tourists’ perceived value. Moreover, this study identifies that convergence mode and effect mediate the relationship between the tourism industry convergence path and perceived value. This study validates the efficacy of industrial convergence paths and models in fostering regional industry convergence within the tourism sector. Additionally, it contributes a theoretical framework for evaluating industry convergence effects at a micro level, enhancing both the theoretical understanding and practical applications of Macao’s tourism industry and industrial convergence theory.

In the last few decades, nano-electronic devices have been manufactured using VLSI technology. Over the past four decades, IC technology has been growing by using CMOS technology successfully, but this CMOS technology has a scaling limitation. To overcome this scaling limitation, QCA (quantum dot cellular automata) emerges as an alternative. This work is the implementation of the design of a polar encoder using QCA technology. This design is a single-layered and even bottom-up approach technique. The Polar code is more efficient and has less energy dissipation compared to the turbo code and conventional codes (CC). This design explores (8:4). A Polar encoder is designed to have fewer cells and area compared to the turbo encoder and conventional encoder. The proposed design is implemented using the QCA designer tool.

Social media influencer marketing has emerged as an essential marketing strategy in the online interactive environment. This study investigates the impact of influencer-consumer fit (ICF) on behavioral intentions; intention to co-create brand value (ICC) and purchase intention (PI), with the serial mediation of influencer authenticity (IA) and attitude toward brand (ATB). A self-administered questionnaire was distributed to followers of social media influencers in Pakistan. The data were collected from 421 female followers of social media influencers through survey and partial least squares—structural equation modeling was used for data analysis. The findings reveal that ICF impacts IA, while the latter impacts ATB. ATB in turn impacts behavioral intentions. The direct effects suggest that ICF impacts consumers’ PI but not the ICC. However, with the serial mediation of IA and ATB, the relationship becomes significant. The findings of this study may assist managers in building brand strategies to achieve excellence in a highly dynamic and competitive market by leveraging the power of influencer marketing.