This study investigates the optimization of ride-sharing services (RSS) on the ride-hailing service (RHS) providers in Bangladesh. This study employed an explanatory sequential mixed method research design- a qualitative study followed by a quantitative one. Qualitative data were collected through focus group discussions and in-depth interviews with twenty (20) riders and drivers in Bangladesh, and quantitative data were collected from 300 respondents consisting of riders and drivers using a convenience sampling technique. Factor analysis and hierarchical cluster analysis were applied to the data analysis. The qualitative analysis reveals several significant factors associated with RSS and RHS, including cost efficiency, fare, fuel consumption, traffic congestion, carbon emissions, environmental pollution, employment opportunities, business growth, and security. The quantitative results indicate that using RSS is associated with more significant benefits than RHS in various aspects, including cost efficiency, fare, fuel consumption, traffic congestion, carbon emissions, environmental pollution, employment opportunities, and expansion of the automobile industry. The findings may assist policymakers in understanding how RSS can yield more incredible economic, environmental, and social benefits than RHS by analyzing fare sharing among passengers, carbon emissions, fuel consumption, and the expansion of the vehicle markets etc. Therefore, the government can formulate distinct policies for RSS holders due to their contributions to economic, social, and environmental concerns. While RHS services are available in many cities in Bangladesh, this study considered only Dhaka and Sylhet cities. Thus, future studies can consider more respondents from other cities for a holistic understanding.

Alfalfa is considered the most used forage crop in the world, its main use is for cattle feeding, due to its high nutritional value, specifically in protein and digestible fiber. Currently, the trend in agriculture is to reduce the application of chemicals and among them are fertilizers that pollute soil and water, so the adoption of new technologies and other not so new is becoming a good habit among farmers. Nanotechnology in the plant system allows the development of new fertilizers to improve agricultural productivity and the release of mineral nutrients in nanoforms, which has a wide variety of benefits, including the timing and direct release of nutrients, as well as synchronizing or specifying the environmental response. Biofertilizers are important components of integrated nutrient management and play a key role in soil productivity and sustainability. While protecting the environment, they are a cost-effective, environmentally friendly and renewable source of plant nutrients to supplement chemical fertilizers in the sustainable agricultural system. Nanotechnology and biofertilization allow in a practical way the reduction in the application of chemicals, contributing to the sustainability of agriculture, so this work aims to review the relevant results on biofertilization, the use of nanotechnology and the evaluation of the nutritional composition of alfalfa when grown with the application of biofertilizers.

Helical deep hole drilling is a process frequently used in industrial applications to produce bores with a large length to diameter ratio. For better cooling and lubrication, the deep drilling oil is fed directly into the bore hole via two internal cooling channels. Due to the inaccessibility of the cutting area, experimental investigations that provide information on the actual machining and cooling behavior are difficult to carry out. In this paper, the distribution of the deep drilling oil is investigated both experimentally and simulatively and the results are evaluated. For the Computational Fluid Dynamics (CFD) simulation, two different turbulence models, i.e. the RANS k-ω-SST and hybrid SAS-SST model, are used and compared. Thereby, the actual used deep drilling oil is modelled instead of using fluid dynamic parameters of water, as is often the case. With the hybrid SAS-SST model, the flow could be analyzed much better than with the RANS k-ω-SST model and thus the processes that take place during helical deep drilling could be  simulated with realistic details. Both the experimental and the simulative results show that the deep drilling oil movement is almost exclusively generated by the tool rotation. At the tool’s cutting edges and in the flute, the flow velocity drops to zero for the most part, so that no efficient cooling and lubrication could take place there. In addition, cavitation bubbles form and implode, concluding in the assumption that the process heat is not adequately dissipated and the removal of chips is adversely affected, which in turn can affect the service life of the tool and the bore quality. The carried out investigations show that the application of CFD simulation is an important research instrument in machining technology and that there is still great potential in the area of tool and process optimization.

The main objective of the study is to discuss the application of a participatory approach that involves the community of a small rural area in Italy to develop and maintain a sustainable local food system based on a very ancient and high-quality typical local bean. The efficacy of the approach in terms of the active involvement of local actors (farming communities, local administration, social associations, and civil society) and knowledge transfer for preserving the local food culture has been demonstrated. Possible improvements to the approach through digital technologies for stimulating the effective engagement of teenagers have also been discussed.

Cucumber (Cucumis sativus L.) is a tropical vegetable and a source of vitamins such as K, C, and B. It is commonly grown and sold for daily consumption, but picking the right fruit size is more profitable. Therefore, a method for estimating the fruit weight is highly recommended. This paper aimed to determine the dimensions of cucumber fruit based on its usual harvesting size and to establish a model to show the relationship between fruit weight, fruit length, and fruit diameter. Cucumber was planted in the experimental field belonging to the Faculty of Agricultural Biosystems Engineering, Royal University of Agriculture, Phnom Penh, Cambodia, from January to June 2022. In the study, 48 market-size fruits were randomly selected from the plots to measure their weight, length, and diameter. The result shows that fruit length and fruit diameter had a positive relationship (P < 0.001; R = 0.70). Fruit weight was 3.38 fruit length × fruit diameter (P <0.001; R = 0.95). Nevertheless, L/D ratio negatively affected fruit weight, when it exceeded 3:1. Fruit weight was greater than 100 g when fruit diameter was over 4 cm and fruit length was over 10 cm. Therefore, when picking cucumber fruits, one must consider fruit length and diameter to be profitable. Further studies will focus on measuring cucumber fruit already available on the market to understand more about actual consumer preferences.

An appraisal of the groundwater potential of Alex Ekwueme Federal University Ndufu Alike was carried out by integrating datasets from geology, geographic information system and electrical resistivity survey of the area. The study area is underlain by the Asu River group of Albian age. The Asu River Group in the Southern Benue Trough comprises of Shales, Limestones and Sandstone lenses of the Abakaliki Formation in Abakaliki and Ikwo areas. The shales are generally weathered, fissile, thinly laminated and highly fractured and varies between greyish brown to pinkish red in colour. Twenty (20) Vertical Electrical Sounding data were acquired using SAS 1000 ABEM Terrameter and processed to obtain layer parameters for the study area. A maximum current electrode spacing (AB) of 300 meters was used for data acquisition. Computer aided iterative modelling using IPI2 Win was used to determine layer parameters. In-situ Hydraulic Conductivity measurements at seven parametric locations within the study area were conducted and integrated with Electrical Resistivity measurements to determine aquifer parameters (e.g., Hydraulic conductivity and Transmissivity) in real time. This technique reduces the attendant huge costs associated with pumping tests and timelines required to carry out the technique. Accurate delineation of aquifer parameters and geometries will aid water resource planners and developers on favourable areas to site boreholes in the area. Several correlative cross-sections were generated from the interpreted results and used to assess the groundwater potential of the study area. Results show that the resistivity of the the aquifer ranges from 7.3 Wm–530 Wm while depth to water ranges from 11.4 m to 55.3 m. Aquifer thicknesses range from 8.7 m at VES 5 to 36.3 m at VES 6 locations. Hydraulic conductivity ranges from 1.55 m/day at VES 15.18, and 19 locations to 9.8 m/day at VES 3 and 4 locations respectively. Transmissivity varies from 17.48 m²/day at VES 19 to 98 m²/day at VES 3 locations respectively. Areas with relatively high transmissivities coupled with good aquifer thicknesses should be the target of water resource planners and developers when proposing sites for drilling productive boreholes within Alex Ekwueme federal University Ndufu Alike.