This project is carried out to assess the remediation effect on soil contaminated by molybdenum (Mo), one of heavy metals, through the use of an energy crop, sunflowers. This project explores the integration of phytohormones and chelates in the phytoremediation of soils contaminated by heavy metals, and further assesses the operational measures of remedying heavy-metal contaminated soil with sunflowers, in addition to the related environmental factors. Then the project explores phytohormones and heavy metals on the growth scenario explants (explants morphological analysis) through the experiment. The results indicate that GA₃ can increase the growth rate of the plants. The average incremental growth of the heavy-metal-added-only group is 21.0 cm; of the GA₃-added group it is 21.9 cm; of the EDDS-added group, it is 20.3 cm; of the GA₃+ EDDS-added group, it is 21.7 cm. Compared with the conventional methods of phytoremediation, these integrated measures can actually spur the growth of plants.

It increased the demands on ground-water supplies that prolonged drought and improper maintenance of water resources. So it is necessary to evaluate ground-water resources in the hard rock terrain. In recent years, Remote-Sensing methods have been increasingly recognized as a means of obtaining crucial geoscientific data for both regional and site-specific investigations. This work aims to develop and apply integrated methods combining the information obtained by geo-hydrological field mapping and those obtained by analyzing multi-source remotely sensed data in a GIS environment for better understanding the Groundwater condition in hard rock terrain. In this study, digitally enhanced Landsat ETM+ data was used to extract information on geology, geomorphology. The Hill-Shading techniques are applied to SRTM DEM data to enhance terrain perspective views, and extract Geomorphological features and morphologically defined structures through the means of lineament analysis. A combination of Spectral information from Landsat ETM+ data plus spatial information from SRTM-DEM data is used to address the groundwater potential of alluvium, colluvium, and fractured crystalline rocks in the study area. The spatial distribution of groundwater potential zones shows regional patterns related to lithologies, lineaments, drainage systems, and landforms. High-yielding wells and springs are often related to large lineaments and corresponding structural features such as dykes. The results show that the combination of remote sensing, GIS, traditional fieldwork, and models provide a powerful tool for water resources assessment and management, and groundwater exploration planning.

Fire is one of the most serious hazards, which causes many economic, social, ecological, and human damages every year in the world. Fire in forests and natural ecosystems destroys wood, regeneration, forest vegetation, as well as soil erosion and forest regeneration problems (due to the dryness of the weather and the weakness of the soil). Awareness of the extent of the zones that have been fired is important for forest management. On the other hand, the difficulty of fieldwork due to the high cost and inaccessible roads, etc. reveals the need for using remote sensing science to solve this problem. In this research, MODIS satellite images were used to detect and determine the fire extent of Golestan province forests in northern Iran. MID13q1 and MOD13q1 images were used to detect the normal conditions of the environment. The 15-year time series data were provided for the NDVI and NDMI indicators in 2000-2015. Then, the behavior of indicators in the fire zone was studied on the day after the fire. The burned zones by the fire were specified by determining the appropriate threshold and then, they were compared to long-term normals. In the NDMI and NDVI indicators, the mean of the numeric value threshold limit for determining the burnt pixels was respectively 1.865 and 0.743 of the reduction in their normal long-term period, which are selected as fire pixels. The results showed that the NDMI index could determine the extent of the burned zone with the accuracy of 95.15%.

Attempts were made in the present study to design and develop skeletally modified ether linked tetraglycidyl epoxy resin (TGBAPSB), which is subsequently reinforced with different weight percentages of amine functionalized mullite fiber (F-MF). The F-MF was synthesized by reacting mullite fiber with 3-aminopropyltriethoxysilane (APTES) as coupling agent and the F-MF structure was confirmed by FT-IR. TGBAPSB reinforced with F-MF formulation was cured with 4,4’-diamino diphenyl methane (DDM) to obtain nanocomposite. The surface morphology of TGBAPSB-F-MF epoxy nanocomposites was investigated by XRD, SEM and AFM studies. From the study, it follows that these nanocomposite materials offer enhancement in mechanical, thermal, thermo-mechanical, dielectric properties compared to neat (TGBAPSB) epoxy matrix. Hence we recommend these nanocomposites for a possible use in advanced engineering applications that require both toughness and stiffness.

Polymers obtained from renewable sources are gaining popularity over their petroleum based counter parts in recent years due to their capability to address the environmental pollution related concerns emanating from the widespread usage of synthetic polymers. Even though the polymers from renewable sources are attractive in an environmental point of view, some of the property limitations and the high cost of these materials pose limitations for their extensive commercial applications. These aspects opened the door for a large chunk of research activities in development of polyblends and composites containing polymers from renewable sources as one of the components. Poly (lactic acid) (PLA) is one of the most discussed and commercialized polymer originated from renewable resources. Even though it has many useful properties, certain disadvantages like high brittleness, low impact resistance etc. limit the wide spread commercialization of PLA. In this review article, the recent research activities which are aimed to fill this gap by various modifications of PLA are discussed with special emphasis on the latest research advancements in the field of biodegradable and non biodegradable systems containing PLA.

Infrastructure development is critical to delivering growth, reducing poverty and addressing broader development goals, as argued in the World Bank Report Transformation through Infrastructure (2012). This paper surveys the literature of the linkages between infrastructure investment and economic growth, discusses the role of infrastructure in the participation of global value chains and in supporting economic upgrades, highlights the challenges faced the least developed countries and provides policy recommendations. It suggests that addressing the bottlenecks in infrastructure is a necessary condition to provide a window of opportunity for an economy to develop following its comparative advantage. With the right conditions, good infrastructure can support an economy, particularly a less developed economy, to reap the benefit through the participation in the global value chains to upgrade the economic structure.