ZrO₂ thin film samples were produced by the sol-gel dip coating method. Four different absorbed dose levels (such as ~ 0.4, 0.7, 1.2 and 2.7 Gray-Gy) were applied to ZrO₂ thin films. Hence, the absorbed dose of ZrO₂ thin film was examined as physical dose quantity representing the mean energy imparted to the thin film per unit mass by gamma radiation. Modification of the grain size was performed sensitively by the application of the absorbed dose to the ZrO₂ thin film. Therefore the grain size reached from ~50 nm to 87 nm at the irradiated ZrO₂ thin film. The relationship of the grain size, the contact angle, and the refractive index of the irradiated ZrO₂ thin film was investigated as being an important technical concern. The irradiation process was performed in a hot cell by using a certified solid gamma ray source with 0.018021 Ci as an alternative technique to minimize the utilization of extra toxicological chemical solution. Antireflection and hydrophilic properties of the irradiated ZrO₂ thin film were slightly improved by the modification of the grain size. The details on the optical and structural properties of the ZrO₂ thin film were examined to obtain the optimum high refractive index, self-cleaning and anti-reflective properties.

This review provided a detailed overview of the different synthesis and characterization methods of polymeric nanoparticles. Nanoparticles are defined as solid and colloidal particles of macromolecular substances ranging in size under 100 nm. Different types of nanoparticles are used in many biological fields (bio-sensing, biological separation, molecular imaging, anticancer therapy, etc.). The new features and functions provided by nano dimensions are largely different from their bulk forms. High volume/surface ratio, improved resolution and multifunctional capability make these materials gain many new features. 

Dormancy is a state of lack of germination/sprouting in seed/tuber although required conditions (temperature, humidity, oxygen and light) are provided. Dormancy is based on hard seed coat dormancy or lack of supply and activity of enzymes (internal dormancy) necessary for germination/sprouting. Dormancy is an important factor limiting production in many field crops. Several physical and chemical pretreatments to production material (seed/tuber) are carried out for overcoming dormancy. Physical and physiological dormancy can be found together in some plants and this event makes it difficult to provide high frequency healthy seedling growth. Whereas, emerging of all production material (seed, tuber) sown/planted and forming healthy seedling are prerequisites of plant production.

Lead halide perovskites are the new rising generation of semiconductor materials due to their unique optical and electrical properties. The investigation of the interaction of halide perovskites and light is a key issue not only for understanding their photophysics but also for practical applications. Hence, tremendous efforts have been devoted to this topic and brunch into two: (i) decomposition of the halide perovskites thin films under light illumination; and (ii) influence of light soaking on their photoluminescence (PL) properties. In this review, we for the first time thoroughly compare the illumination conditions and the sample environment to correlate the PL changes and decomposition of perovskite under light illumination. In the case of vacuum and dry nitrogen, PL of the halide perovskite (MAPbI_3–xCl_x, MAPbBr_3–xCl_x, MAPbI₃) thin films decreases due to the defects induced by light illumination, and under high excitations, the thin film even decomposes. In the presence of oxygen or moisture, light induces the PL enhancement of halide perovskite (MAPbI₃) thin films at low light illumination, while increasing the excitation, which causes the PL to quench and perovskite thin film to decompose. In the case of mixed halide perovskite ((MA)Pb(Br_xI_1-x)₃) light induces reversible segregation of Br domains and I domains.