Diamond-like Nanocomposites (DLN) is a newly member in amorphous carbon (a:C) family. It consists of two or more interpenetrated atomic scale network structures. The amorphous silicon oxide (a:SiO) is incorporated within diamond-like carbon (DLC) matrix i.e. a:CH and both the network is interpenetrated by Si-C bond. Hence, the internal stress of deposited DLN film decreases remarkably compare to DLC. The diamond-like properties have come due to deform tetrahedral carbon with sp³ configuration and high ratio of sp³ to sp² bond. The DLN has excellent mechanical, electrical, optical and tribological properties. Those properties of DLN could be varied over a wide range by changing deposition parameters, precursor and even post deposition treatment also. The range of properties are: Resistivity 10^-4 to 10¹⁴ Ωcm, hardness 10–22 GPa, coefficient of friction 0.03-0.2, wear factor 0.2-0.4 10^-7mm³/Nm, transmission Vis-far IR, modulus of elasticity 150-200 GPa, residual stress 200-300 Mpa, dielectric constant 3-9 and maximum operating temperature 600^°C in oxygen environment and 1200^°C in O₂ free air. Generally, the PECVD method is used to synthesize the DLN film. The most common procedures used for investigation of structure and composition of DLN films are Raman spectroscopy, Fourier transformed infrared spectroscopy (FTIR), HRTEM, FESEM and X-ray photo electron spectroscopy (XPS). Interest in the coating technology has been expressed by nearly every industrial segment including automotive, aerospace, chemical processing, marine, energy, personal care, office equipment, electronics, biomedical and tool and die or in a single line from data to beer in all segment of life. In this review paper, characterization of diamond-like nanocomposites is discussed and subsequently different application areas are also elaborated.

The cambucizeiro (Campomanesia phaea), belonging to the Myrtaceae family, is a native plant of the Brazilian Atlantic Forest. The description of the characteristics of the cambucizeiro fruits is important to support new genetic improvement works and its commercial exploitation, especially regarding the processing of the fruit. The present work aimed to perform the morphological and chemical characterization of the cambucizeiro fruits. Fifty-eight accessions, from different locations in the Atlantic Forest and Serra do Mar in the state of São Paulo, were collected, propagated by seeds and one specimen of each accessory is at the Seedling Production Center in São Bento do Sapucaí (SP). Forty fruits from each access were collected in May and submitted to the following analyses: longitudinal and transversal diameter, total fruit fresh mass, number and mass of seeds, total soluble solids, % citric acid, ratio, firmness, vitamin C and coloration. Fruit conformation varies intensely among accessions. The number of seeds is not a good indicator for the relation with the fruit mass, but the mass of one thousand seeds. Some accessions have high soluble solids content, but, on the other hand, the vast majority have fruits with high acidity. Cambuci is an excellent source of vitamin C. The fruits of the accessions are green in color, persisting an opaque shade when ripe.

In this paper, electrically conductive composites comprised of silicone rubber and titanium diboride (TiB₂) were synthesized by conventional mixing methods. Fine particles of TiB₂ (in micron size) and 10 parts per hundred parts of rubber (phr) proportion of carbon black (XC-72) were used to make the composites with HTV silicone rubber. The composites were cured at appropriate temperature and pressure and the effect on the electrical properties was studied. The resistance of the silicone rubber is ~ 10¹⁵Ω which decreases to 1–2 kΩ in case of composites with negligible effect of heat ageing. The hardness increases by ~ 35% simultaneous to the decrease of ~ 47% in the tensile strength. Morphological characterization indicates the homogeneous dispersion of the fillers in the composite.

This review provided a detailed overview of the different synthesis and characterization methods of polymeric nanoparticles. Nanoparticles are defined as solid and colloidal particles of macromolecular substances ranging in size under 100 nm. Different types of nanoparticles are used in many biological fields (bio-sensing, biological separation, molecular imaging, anticancer therapy, etc.). The new features and functions provided by nano dimensions are largely different from their bulk forms. High volume/surface ratio, improved resolution and multifunctional capability make these materials gain many new features. 

Considering the need to adopt more sustainable agricultural systems, it is important that sweet potato breeding programs seek to increase not only root productivity, but also the productivity and quality of branches for silage production. The objective was to evaluate the genetic divergence and the importance of traits associated with the production and quality of branch silage in sweet potato genotypes. The experiment was conducted on the JK Campus of the Federal University of Vales do Jequitinhonha and Mucuri Valleys in a randomized block design with 12 treatments and four repetitions. Twelve characteristics of branches and silage were evaluated. There was genetic variability between the genotypes, making it possible to select parents divergent for future breeding programs for silage production. The genotypes BD-54 and BD-31TO were the most divergent in relation to the others, being indicated its use in crossbreeding aiming the improvement of the culture for silage, once the high performance per se of all genotypes evaluated has already been verified in previous works. The characteristics Na, TDN and NDF were those that most contributed to the divergence.

A large number of people of the fringe areas of Sundarban enter into the forests every year and encounter with the tigers simply for their livelihood. This study attempts to examine the extent and impact of human-animal conflicts in the Sundarban Reserve Forest (SRF) area in West Bengal, India. An intensive study of the data of the victims (both death and injury) between 1999 and 2014 reveals that, fishermen crab collector, honey collectors and woodcutters are generally victimized by the tiger attack. Pre monsoon period (April to June) and early winter period (Jan to March) are noted for the two-peak periods for casualties. Maximum casualty occurs between 8-10 am, and 2-4 pm. Jhilla (21.1%), Pirkhali (19.72 %), Chandkhali (11.72%), and Arbesi (9.35%) are the four most vulnerable forest blocks accounting more than 60 per cent occurrence of incidences. 67.24 per cent of the tiger attack victims were residents of Gosaba followed by Hingalganja (15%) and Basanti, (9.76%). The vulnerability rating puts the risk of tiger attack to 0.88 for every 10,000 residents of Gosaba block followed by 0.33 at Hingalganj Block and 0.11 at Bansanti Block. The majority of the victims (68%) were found to be males, aged between 30 and 50 years.