Eco-friendly and greener barrier materials are required to replace the synthetic packaging materials as they produce a threat to environment. These can be fabricated by natural polymers such as cellulose nanofiber (CNF). The sustainability of CNF was so amazing due to its potential for circular economy and provides alternative platform for synthetic plastics. The challenging task to fabricate CNF films still existed and also current methods have various limitations. CNF films have good oxygen permeability and the value was lower than synthetic plastics. However, CNF films have poor water vapour permeability and higher than that of synthetic plastics. The fabrication method is one of strong parameters to impact on the water permeability of CNF films. The deposition of CNF suspension on the stainless-steel plate via spraying, is a potential process for fabrication for CNF films acting as barrier material against water vapour. In spraying process, the time required to form CNF films in diameter of 15.9 cm was less than 1 min and it is independent of CNF content in the suspension. The uniqueness of CNF films via the spraying process was their surfaces, such as rough surface exposed to air and smooth surface exposed to stainless steel. Their surfaces were investigated by SEM, AFM and optical profilometry micrographs, confirming that the smooth surface was evaluated notable lower surface roughness. The spray coated surface was smooth and glossy and its impact on the water vapor permeability remains obscure. The spraying process is a flexible process to tailor the basis weight and thickness of CNF films can be adjusted by the spraying of CNF suspension with varying fibre content. The water vapour permeability of CNF films can be tailored via varying density of CNF films. The plot between water vapour transfer rate (WVTR)/water vapour and density of CNF films has been investigated. The WVP of spray coated CNF films varied from 6.99 ± 1.17 × 10⁻¹¹ to 4.19 ± 1.45 × 10⁻¹¹ g/m.s.Pa. with the density from 664 Kg/m³ to 1,412.08 Kg/m³. The WVP of CNF films achieved with 2 wt% CNF films (1,120 Kg/m³) was 3.91 × 10⁻¹¹ g/m.s.Pa. These values were comparable with the WVP of synthetic plastics. Given this correspondence, CNF films via spraying have a good barrier against water vapour. This process is a potential for scale up and commercialization of CNF films as barrier materials.

Plastic products, including plastic packaging, were products whose increasing demand continued because the community still needed plastic as packaging. On the other hand, plastic waste, which was increasingly high and difficult to decompose, was a problem that needed to be solved together. This study aims to understand how plastic company packaging implements TQM, its environmental impact, and how plastic packaging companies are taking steps towards green manufacturing. This research used a qualitative phenomenological method to understand the problem based on the actor’s perspective. The data collection method was in-depth interviews with informants from 3 plastic companies in East Java, Indonesia, followed by observation and FGD. We carried out Triangulation, member checking, and professional involvement to determine the data’s validity, reliability, and trustworthiness. The results of this study indicated a management system that promotes quality as a business strategy and is oriented towards customer satisfaction by involving all members of the organization. TQM emphasized continuous improvement, customer satisfaction, and employee involvement. By implementing aspects of TQM, plastic packaging companies could improve their production processes and reduce waste, increasing efficiency and profitability. In addition, TQM could also contribute to the company’s green performance by promoting environmentally friendly practices, including using electric machines to replace hydraulic machines, thereby reducing the use of electrical energy and CO₂ emissions. The use of solar panels was a step towards green manufacturing. Companies that adopt TQM principles are more likely to implement environmentally friendly initiatives such as reducing energy consumption and using recyclable materials and can demonstrate a commitment to corporate social responsibility. The company’s membership in EcoVadis and SMETA further strengthens the company’s direction towards Green Manufacturing and competitive advantage.

Islamabad’s 2019 ban on single-use plastic shopping bags aimed to reduce plastic waste, but compliance is limited. This study evaluates the effectiveness of the ban as well as other factors in curtailing plastic bag use in Islamabad. Regression modeling within a rational choice framework analyzed survey data from 406 retailers across 18 selected urban and rural markets. We found that the subjective belief that a fine was unlikely (β = −16.10; t = −3.90; p < 0.001), likely (β = −24.99; t = −4.95; p < 0.001), or very likely (β = −43.84; t = −4.07; p < 0.001) for selling bags versus very unlikely was significantly associated with lower usage. Additionally, older retailer age (β = −0.25; p < 0.001) and more education (β = −0.77; p < 0.01) were associated with lower plastic bag usage. Business registration (β = −3.94; p < 0.10) and trade membership (β = −4.04; p < 0.05) also decreased use. Rural location (zone II: β = 13.28; p < 0.001) and plastic bags stock availability (β = 16.75; p < 0.001) increased use. Awareness, viewing bags as “Good”, unlikely fines and lack of substitutes lowered use. Results provide insights to inform more effective policies for reducing plastic waste.

This paper aims to systematically analyze the current state of plastic waste legal supervision in China and to propose a vision for future governance frameworks. In recent years, along with the vigorous rise of emerging industries such as the express delivery industry and takeaway services, the consumption of plastic products has increased sharply. This trend has triggered profound reflection and high vigilance on the issue of plastic waste supervision. This trend has triggered profound reflection and acute vigilance regarding the regulation of plastic waste. Although the Chinese government has initiated multiple regulatory measures and achieved certain outcomes, from a macroscopic perspective, the issue of plastic waste pollution remains grave, and the relevant legal and regulatory system presents a complex situation with limited enforcement efficacy. Hence, it is exceptionally urgent and significant to deeply explore and formulate legislative strategies aimed at alleviating and regulating plastic waste pollution. This paper is dedicated to systematically analyzing the current state of plastic waste legal supervision from both international and domestic dimensions, and meticulously outlining the regulatory framework for plastic waste governance in China. Through the application of legal norm research methods, this paper dissects the flaws and challenges existing in the current governance mechanisms and further conducts a comparative study of the successful practices in this field in developed countries like the United States, with the intention of drawing valuable experiences. On this basis, this paper not only offers a forward-looking outlook on China’s future legislative tendencies in plastic waste pollution but also innovatively proposes a series of new insights and recommendations. These explorations aim to provide a more solid theoretical foundation and practical guidance for the governance approach to plastic waste pollution in China, promote the improvement and enhancement of the enforcement effectiveness of environmental regulations, and thereby effectively confront the global challenge of plastic pollution.

The relationship between new-quality productivity and educational equity is characterized by close mutual influence and co-evolution. Driven by technological innovation, new-quality productivity is profoundly transforming the economic and social landscape. Educational equity, a crucial component of social justice, is vital for ensuring equal development opportunities for all individuals. The robust growth of new-quality productivity not only optimizes the distribution of educational resources and enhances educational quality but also poses new challenges and demands for equity in education. In turn, the continuous advancement of educational equity provides a solid talent foundation and a conducive environment for innovation to new-quality productivity. These two aspects intertwine and progress together in various domains, including policy systems, cultural values, and educational practices. This interplay highlights the central role of new-quality productivity and educational equity in societal development, while also demonstrating their dynamic and complementary relationship.