The provision of infrastructure and related services in developing Asia via public–private partnership (PPP) increased rapidly during the late 1990s. Theoretical arguments support the potential economic benefits of PPPs, but empirical evidence is thin. This paper develops a framework identifying channels through which economic gains can be derived from PPP arrangement. The framework helps derive an empirically tractable specification that examines how PPPs affect the aggregate economy. Empirical results suggest that increasing the ratio of PPP investment to GDP improves access to and quality of infrastructure services, and economic growth will potentially be higher. But this optimism is conditional, especially on the region’s efforts to further upgrade its technical and institutional capacity to handle complex PPP contracts.

In the current work, it was investigated to the K X-ray fluorescence efficiency and chemical effect on vacancy transfer probability for some tin compounds. We used Br₂Tin, TinI₂, SeTin, TinF₂, TinSO₄, TinCl₂, TinO and TinS compounds for experimental study. The target samples were irradiated with ²⁴¹Am annular radioactive source at the intensity of 5 Ci which emits gamma rays at wavelength of 0.2028 nm. The characteristic x-rays emitted because of the excitation are collected by a high-resolution HPGe semiconductor detector. It has been determined that the experimental calculations of the tin (Sn) element are compatible with the theoretical calculation. In addition, we have calculated the experimental intensity ratios, fluorescence yields and total vacancy transfer probabilitiesfor other Sn compounds. 

The objective of this study was to evaluate the growth of four lettuce cultivars in Southern Piauí to recommend the best ones for the region. The experiment was conducted in a greenhouse with randomized blocks, with evaluation in subdivided time plots, evaluated in six seasons (20, 24, 28, 32, 36, 40 days after sowing—DAS) and with treatments corresponding to four cultivars (Americana Rafaela^®, Grand Rapids TBR^®, Crespa Repolhuda^® and Repolhuda Todo ano^®) with five repetitions. Leaf area, number of leaves, collar diameter, aboveground fresh mass, aboveground dry mass, root dry mass and total and the physiological indices of growth analysis were evaluated. The lettuce cultivars interfered significantly in the studied parameters, being that Americana Rafaela^® and Repolhuda todo ano^®, in the conditions that they were submitted, presented better performances and bigger morphophysiological indexes, cultivated in pot. The cultivars Americana Rafaela^® and Repolhuda todo ano^® can be produced under the conditions of the south of Piauí.

For five different regions in Kırklareli province, heavy metals; such as Pb, Ni, Cu, Mn, Cd, Cr, Co, Zn, Mo, and Fe in the mixture of leaves and flowers from linden trees (Tilia tomentosa L.) were analyzed by using flame atomic absorption spectroscopy after the samples were dissolved with microwave method. Also, organochloride pesticides; such as ∑BHC: [α-BHC, β-BHC, γ-BHC, and δ-BHC], ∑DDT: [4,4’-DDD, 4,4’-DDE, and 4,4’-DDT], α-Endosulfan, β-Endosulfan, Endosulfan sulfate, Heptachlor, Heptachlor-endo-epoxide, Aldrin, Dieldrin, Endrin aldehyde, Endrin ketone, Endrin and Methoxychlor in these samples were determined by utilizing gas chromatography mass spectroscopy after the samples were prepared for analyses by using QuEChERS method. The metal concentrations in the samples were in the range of 45.3 to 268 mg/kg for Mn, 0.25 to 18.8 mg/kg for Cu, 11.5 to 46.1 mg/kg for Zn, 128 to 1310 mg/kg for Fe, 10.4 to 38.6 mg/kg for Mo, 0.82 to 1.34 mg/kg for Cd, 0 to 6.45 mg/kg for Ni, 0 to 19.2 mg/kg for Pb, and 0 to 8.25 mg/kg for Cr. Moreover, the concentrations of organochloride pesticides in samples were usually determined to be lower than their maximum residue level values given the pesticide residue limit regulation of Turkish Food Codex. 

In this paper, an improved mathematical model for flashover behavior of polluted insulators is proposed based on experimental tests. In order to determine the flashover model of polluted insulators, the relationship between conductivity and salinity of solution pollution layer of the insulator is measured. Then, the leakage of current amplitude of four common insulators versus axial, thermal conductivity and arc constants temperature was determined. The experimental tests show that top leakage distance (TLd) to bottom leakage distance (BLd) ratio of insulators has a significant effect on critical voltage and current. Therefore, critical voltage and current were modeled by TLd to BLd ratio Index (M). Also, salinity of solution pollution layer of the insulators has been applied to this model by resistance pollution parameter. On the other hand, arc constants of each insulator in new model have been identified based on experimental results. Finally, a mathematical model is intended for critical voltage against salinity of solution pollution layer of different insulators. This model depends on insulator profile. There is a good agreement between the experimental tests of pollution insulators obtained in the laboratory and values calculated from the mathematical models developed in the present study.

This study examines conditions that impact PPP delivery success or failure in the roadways sector in India using Qualitative Comparative Analysis. QCA is well-suited for problems where multiple factors combine to create pathways leading to an outcome. Past investigations have compared PPP and non-PPP project delivery performance, but this study examines performance within PPPs by uncovering a set of conditions that combine to influence the success or failure road PPP project delivery in India. Based on data from 21 cases, pathways explaining project delivery success or failure were identified. Specifically, PPPs with high concessionaire equity investment and low regional industrial activity led to project delivery success. Projects with lower concessionaire equity investment and low reliance on toll revenue and with either: (a) high project technical complexity or (b) high regional industrial activity, led to project delivery failure. The pathways identified did not have coverage values that they were extremely strong. Coverage strength was hindered by lack of access to information on additional conditions that could be configurationally important. Further, certain characteristics of the Indian market limit generalization. Identification of combinations of conditions leading to PPP project delivery success or failure improves knowledge of the impacts of structure and characteristics of these complex arrangements. This study is one of the first to use fuzzy QCA to understand project delivery success/failure in road PPP projects. Moreover, this study takes into account factors specific to a sector and delivery mode to explain project delivery performance.