The effective drainage radius of coal seam is an important basis for the spacing of pre-drainage gas boreholes. To quickly and accurately determine the effective drainage radius, a new method was proposed. For the coal face where the desorbable gas content before mining has met the standard, the compliance of mine gas drainage rate was used as the basis to determine the effective drainage radius. The fluid-structure interaction model was constructed, numerical simulation of coal seam gas drainage was carried out by using COMSOL software, and the model was validated by combining the field test results. The results show that the new method has the advantage of short cycle. With the extension of drainage time, the increase of effective drainage radius gradually decreases, and finally reaches a relatively stable limit value, which conforms to the Langmuir function. The average error between numerical simulation and field test values of effective drainage radius is 4.9%, which proves that the model is reliable. This model can accurately predict the effective drainage radius under different coal seam gas contents and drainage times. The research results provide a new mean for determining the effective drainage radius of coal seam and the layout of gas drainage boreholes.

The St. Peter Sandstone of the American Midwest is presented today in textbooks as a simple and unproblematic example of “layer-cake geology.” The thesis of this paper is that the very simplicity of St. Peter Sandstone has made it challenging to characterize. In widely separated states, the sandstone appeared under different names. Several theories about how it formed began to circulate. The story of the St. Peter is not only the story of the assemblage of a stratigraphic unit over a vast area during three centuries, but also the role the study of the provenance of this unit played in the development of sedimentology in the early twentieth century, research that was made all the more challenging by its “simple” mineralogy. Indeed, the St. Peter has been controversial since it was first described.

The size effect on the free vibration and bending of a curved FG micro/nanobeam is studied in this paper. Using the Hamilton principle the differential equations and boundary conditions is derived for a nonlocal Euler-Bernoulli curved micro/nanobeam.  The material properties vary through radius direction. Using the Navier approach an analytical solution for simply supported boundary conditions is obtained where the power index law of FGM, the curved micro/nanobeam opening angle, the effect of aspect ratio and nonlocal parameter on natural frequencies and the radial and tangential displacements were analyzed. It is concluded that increasing the curved micro/nanobeam opening angle results in decreasing and increasing the frequencies and displacements, respectively. To validate the natural frequencies of curved nanobeam, when the radius of it approaches to infinity, is compared with a straight FG nanobeam and showed a good agreement.

This work investigates epoxy composites reinforced by randomly oriented, short glass fibres and silica microparticles. A full-factorial experiment evaluates the effects of glass fibre mass fraction (15 wt% and 20 wt%) and length (5 mm and 10 mm), and the mass fraction of silica microparticles (5 wt% and 10 wt%) on the apparent density and porosity, as well as the compressive and tensile strength and modulus of the hybrid composites. Hybrid epoxy composites present significantly higher tensile strength (9%) and modulus (57%), as well as compressive strength (up to 15%) relative to pure epoxy.

Nigeria plays important roles in the overall socio-economic development of the entire African continent, including entrepreneurial activities. There is a less focus on the immersion of women and youths in playing participatory roles in digital entrepreneurship and digital technology innovation in order to boost the economic growth of the country. The primary objective of this study is to explore women and youths’ immersion, specifically in connection with digital entrepreneurship and digital technology innovation, for the purpose of fostering the growth of the economy. The methodology employed in this study is Critical Content Analysis (CCA) of cursory literature as an integral part of the qualitative method. The literature was sourced through different databases, such as library sources, journals, and the core collection of Web of Science (WOS), and the collections of studies used for analysis were between 2018 and 2023. The results demonstrated that small and medium enterprises (SMEs) play significant roles in digital entrepreneurship activities in the country. In addition, there are various entrepreneurship programmes in the country, such as the Youth Entrepreneurship Development Programme (YEDP), and there is awareness of the effectiveness and efficiency of digital entrepreneurship. In addition, the result further established that the use of digital technology is an important innovation for the success of digital entrepreneurship in the country. The study further indicated that five factors of women and youths’ immersion in entrepreneurship (perception and opportunities, business performance, digital adoption, skill acquisition, and enabling environment) can boost the growth of the economy in the country. In conclusion, the knowledge and skills of entrepreneurs are major drivers of wealth and job creations, with women and youths playing an active role in the overall entrepreneurship programmes. It is suggested that the stakeholders and actors in entrepreneurship should collaborate to foster the participation of women and youths in entrepreneurship programmes in the country.

Heat conduction theory stipulates that two thermo-physical properties of materials: the thermal conductivity “k” and the thermal diffusivity “α” influence the temperature evolution in regular and irregular bodies as a response to various cooling/heating conditions. The traditional statement involving the two thermo-physical properties is examined at length in the present study for the case of a semi-infinite region. The primary objective of the present study is to investigate the influence of the less known thermo-physical property called the thermal effusivity “e” on the incipient surface temperature rise in a semi-infinite body affected by uniform surface heat flux. The secondary objective of the study is to identify a key figure of merit named the dimensionless threshold time that separates the incipient temperature elevation in a semi-infinite region from the incipient temperature elevation in a large wall of finite thickness under the same uniform surface heat flux. The outcome of the methodical analysis suggests that the accurate estimate for the dimensionless threshold time τ_th in the semi-infinite region should be 0.10.