In this study, the effect of roasting and boiling on the yield and oxidative stability of soya bean oil was investigated. The oil was soxhlet extracted and the oxidative stability was determined by the free fatty acid value, acid value and peroxide value. The results showed that the oil yield, free fatty acid value, acid value and peroxide value were significantly affected by roasting, boiling, and the thermal treatment time. The percentage oil yield in the control oil sample was 18.51%, which increased to 20.24% and 20.73% after boiling and roasting respectively, at 40mins. The corresponding free fatty acid and the peroxide value of the control oil sample were 0.14% and 2.04 meqO₂/kg, which increased to 0.82% and 6.60 meqO₂/kg by roasting, and 0.47% and 5.62 meqO₂/kg by boiling respectively. Thus the oil yield, free fatty acid value, peroxide value, and acid value increased with increasing roasting and boiling time.
The results indicate that roasting provides a higher oil yield than boiling, but boiled oil has higher oxidative stability than roasted oil.

Lithospermum extract from Lithospermum is a kind of naphthoquinone, which has good anti-ultraviolet and anti-bacterial function. In this paper, the effects of different treatment temperature, time and ratio of liquid to liquid on the UV resistance of Lithospermum erythrorhizon extract were studied. The optimum extraction conditions were as follows: extraction temperature 60 ℃, extraction time 2 h, ratio of liquid to liquid of Lithospermum and ethanol 1:11. In this paper, the anti-UV finishing of cotton fabric was carried out, and the anti-ultraviolet and whiteness of the fabric were taken as the main indexes. The optimum process of the anti-UV finishing was as follows: the impregnation temperature was 70 ℃, the immersion time was 2h, 1:40. Compared with the uncoated cotton fabric, the fabric UPF value of the fabric was improved from 12.31 to 83.25, and the anti-ultraviolet performance was excellent, and it had certain bacteriostatic effect on Bacillus subtilis and Escherichia coli.

In the present research work, we investigated the use of the image intensifier in the extraction of radiopaque foreign bodies in traumatology. First of all, it is necessary to clarify that this method constitutes an essential component of practically generalized use, in which low current level radiation is used, that is, fluoroscopic radiation, so that it can be applied for a considerably longer time than that of the longest radiographic exposure. This tool works with a tube intended for this purpose, which is known as fluoroscopy. The radiations from the tube pass through the patient and reach the serigraph, on which the image intensifier or fluoroscopic screen is mounted. In the latter case, this is where the chain ends, since it is on this screen that the image is formed and where the physician directly observes the region to be studied. It is also necessary to define that a foreign body is any element foreign to the body that enters it, either through the skin or through any natural orifice such as the eyes, nose, throat, preventing its normal functioning. It was possible to obtain as a result that the advantages of fluoroscopic navigation are the reduction of surgical time and the amount of irradiation, which goes from about 140 seconds without navigation to only 8 seconds, which is a substantial difference. Among the conclusions, it was possible to highlight that in the case of a radiopaque object, it is essential to have an image intensifier for localization of the foreign body during surgery; while in the case of a radiolucent foreign body, it is more advisable to locate it through the clinic, since these tend to form granulomas.