This study evaluates the influence of quality certificates on sustainable food production in Poland, considering economic, social, and environmental dimensions. Analyzing 25 different certificates, the research explores their criteria, procedures, and costs across various food product categories, including meat, fish, and plant-based products. The study provides a detailed review of certification processes, from initiation to audits and inspections. It identifies both commonalities and differences among certificates, each addressing unique aspects such as environmental impact, worker rights, and product origins. Despite the diversity in standards and procedures, the study underscores the need for standardized international criteria to improve transparency and meet consumer expectations, highlighting the significant role of quality certificates in advancing sustainable food production.

We report a method for effectively and homogeneously incorporating carbon nanotubes (CNTs) in the form of double-wall (DWCNTs) and multi-wall (MWCNTs) structures into commercial paints without the use of additives, surfactants, or chemical processes. The process involves the physical mixing of the nanotubes and polymers using the cavitation energy of an ultrasonic bath. It is a simple, fast method that allows for uniform distribution of carbon nanotube bundles within the polymer for direct application. Due to the hydrophobic properties of the carbon nanotubes as grown, we used paint samples containing 0.3% by mass of both types of CNTs and observed an improvement in waterproofing through wettability and water absorption through immersion tests on the samples. Different solvents such as water, formaldehyde, and glycerin were used, and the results showed an increase in paint impermeability of 30% and 25% with the introduction of DWCNTs and MWCNTs, respectively. This indicates a promising, economically viable, and revolutionary method for applying nanotechnology in the polymer industry.

A total of 25 SSR primers were screened on 37 putative F₁s derived from the five different crosses. Identified cross specific highly informative SSRs primers, i.e., 14 for the first cross, 10 for the second, 12 for the third and 6 each for fourth and fifth crosses. For the first cross Bhagwa × Daru 17, four primers (HvSSRT_375, NRCP_SSR9, NRCP_SSR12 and NRCP_SSR92) were found to be highly informative with higher 100% hybrid purity index (HPI), PIC (~0.52), and observed heterozygosity (Ho, range 0.87–0.93) values, and two F₁s namely H₁ and H₂ were found to be highly heterotic with a heterozygosity index (HI) of 92.85%. Similarly, for Bhagwa × Nana, three primers (HvSSRT_375, HvSSRT_605 and NRCP_SSR19) had higher HPI (70%–100%), PIC (0.52–0.69), and Ho (0.75–0.33) values, and three F₁s H₁, H₂, and H₄ had 70% (HI). For Bhagwa × IC318712, four SSRs (HvSSRT_254, HvSSRT_348, HvSSRT_826 and NRCP_SSR95) had higher Ho (~0.83), HPI (100%) and PIC (~0.52) values, and four F₁s H₂, H₇, H₉, and H₁₀ showed 91.66% (HI). For Bhagwa × Nayana, HvSSRT_605, HvSSRT_826, and HvSSRT_432, and for Ganesh × Nayana, HVSSRT_375, HVSSRT_605, and HvSSRT_826 were found informative. These markers will be highly useful in developing maps of populations.