We have studied the effect of the series resistance on the heating of the cathode, which is based on carbon nanotubes and serves to realize the field emission of electrons into the vacuum. The experiment was performed with the single multi-walled carbon nanotube (MCNT) that was separated from the array grown by CVD method with thin-film Ni-Ti catalyst (nickel 4 nm/Ti 10 nm). The heating of the cathode leads to the appearance of a current of the thermionic emission. The experimental voltage current characteristic exhibited the negative resistance region caused by thermal field emission. This current increases strongly with increasing voltage and contributes to the degradation of the cold emitter. The calculation of the temperature of the end of the cathode is made taking into account the effect of the phenomenon that warms up and cools the cathode. We have developed a method for processing of the emission volt-ampere characteristics of a cathode, which relies on a numerical calculation of the field emission current and the comparison of these calculations with experiments. The model of the volt-ampere characteristic takes into account the CNT’s geometry, properties, its contact with the catalyst, heating and simultaneous implementation of the thermionic and field emission. The calculation made it possible to determine a number of important parameters, including the voltage and current of the beginning of thermionic emission, the temperature distribution along the cathode and the resistance of the nanotube. The phenomenon of thermionic emission from CNTs was investigated experimentally and theoretically. The conditions of this type emission occurrence were defined. The results of the study could form the basis of theory of CNT emitter’s degradation.

In this paper, electrically conductive composites comprised of silicone rubber and titanium diboride (TiB₂) were synthesized by conventional mixing methods. Fine particles of TiB₂ (in micron size) and 10 parts per hundred parts of rubber (phr) proportion of carbon black (XC-72) were used to make the composites with HTV silicone rubber. The composites were cured at appropriate temperature and pressure and the effect on the electrical properties was studied. The resistance of the silicone rubber is ~ 10¹⁵Ω which decreases to 1–2 kΩ in case of composites with negligible effect of heat ageing. The hardness increases by ~ 35% simultaneous to the decrease of ~ 47% in the tensile strength. Morphological characterization indicates the homogeneous dispersion of the fillers in the composite.

Based on the analysis of phenomenology and etymology, we argue that as three different components of Chinese philosophy, Confucianism, Taoism and Buddhism focus on human beings’ transcendence of behavior, body, and mind, which is made concrete as Ming (name of reputation), Qi (physical body), and Dao(way)-De(virtue), respectively. Chinese philosophy has its own system, but it is still a philosophical component in ontology, and its constituent elements are identified as “affirmative universal” by Euler’s Identity Diagrams in contrast both to existences in Heidegger’s triad Seinede-Dasein-Sein ontology, i.e., Being-Beings-To be, and to Freud’s triple self-Ego, Id (body-ego), and Superego. Taoism shapes the physical id with the “Type 1” natural Dao(way) personality”,Buddhism shapes the bodhisattva”Type-1” selfless De(virtue) personality and Confucianism pursues the mediocre”Type 0” social Dao-de(morality)personality”. Therefore, when q equals p, the ideal personality shaped by Chinese philosophy is the perfect combination of the three, displaying its “affirmative particular” unity in elemental composition and the ideal realm of Chinese philosophy follows the Euler’s Identify. Individuals who believe in the tenets of Chinese philosophy should have the personality of triadic mixtures. Nevertheless, one may become an extremely selfish hypocrites wearing social masks while one’s morality value reaches 1.

Accurate temperature control during the induction heating process of carbon fiber reinforced polymer (CFRP) is crucial for the curing effect of the material. This paper first builds a finite element model of induction heating, which combines the actual fiber structure and resin matrix, and systematically analyzes the heating mechanism and temperature field distribution of CFRP during the heating process. Based on the temperature distribution and variation observed in the material heating process, a PID control method optimized by the sparrow search algorithm is proposed, which effectively reduces the temperature overshoot and improves the response speed. The experiment verifies the effectiveness of the algorithm in controlling the temperature of the CFRP plate during the induction heating process. This study provides an effective control strategy and research method to improve the accuracy of temperature control in the induction heating process of CFRP, which helps to improve the results in this field.

Purpose: The study examines the mediating effect of self-emotion appraisal and other-emotion appraisal on psychological safety, individual resilience, and organizational commitment at the workplace. Design/methodology/approach: This study generated 140 survey responses from workers in diverse occupations and industries during the COVID-19 pandemic. A mixed-methods data analysis was conducted. Hierarchical regression analysis was employed to test the hypotheses, and process macroanalysis was used to generate the mediation analysis. Qualitative data analysis through thematic coding was adopted to interpret the respondents’ written opinions and narratives. Findings: The results revealed that self-emotion appraisal strongly correlates to resilience, but evaluation of self-emotion has no effect on organizational commitment. Other-emotion appraisal and psychological safety are not significant predictors of resilience at the workplace. Rather, psychological safety is a significant predictor of organizational commitment. The qualitative analysis generated from the respondents’ narratives provides deeper insight into the quantitative results. Additional data that emerged from the qualitative interpretation revealed other factors that are related to emotional appraisal, psychological safety, resilience, and organizational commitment. Practical implications: The findings shed light on the need to understand an individual’s emotional appraisal when instilling workplace resilience. Further, promoting psychological safety, such as by involving employees in the change process, managing fairness perception, and eliciting trust, enhances organizational commitment in the workplace. Integrating open communication, management intervention, and coaching programmes should form part of the employee engagement and development functions to help build organizational resilience and commitment. Originality/value: This research is an original contribution conducted during the global health crisis that led to abrupt changes in the workers’ lives and the workplaces in Singapore. Research implications: This present study demonstrated constructive findings on emotion regulations and perceived psychological safety associated with resilience and commitment amid the disruptive changes in work practices at the workplace. Further, the outcome of the study shows the mediating effect of self-emotional appraisal on psychological safety and resilience. The result draws parallels with past literature that showed that individuals who appraised their emotions tended to recalibrate and recognize their subjective behaviour and take actions to modify it. Social implications: Emotion regulation connotes employees’ emotion coping strategies, and research showed that emotion reappraisal produces a positive effect on workplace relationship quality. 

The obtaining of new data on the transformation of parent materials into soil and on soil as a set of essential properties is provided on the basis of previously conducted fundamental studies of soils formed on loess-like loams in Belarus (15,000 numerical indicators). The study objects are autochthonous soils of uniform granulometric texture. The basic properties without which soils cannot exist are comprehensively considered. Interpolation of factual materials is given, highlighting the essential properties of soils. Soil formation is analyzed as a natural phenomenon depending on the life activity of biota and the water regime. Models for differentiation of the chemical profile and bioenergy potential of soils are presented. The results of the represented study interpret the available materials taking into account publications on the biology and water regime of soils over the past 50 years into three issues: the difference between soil and soil-like bodies; the soil formation as a natural phenomenon of the mobilization of soil biota from the energy of the sun, the atmosphere, and the destruction of minerals in the parent materials; and the essence of soil as a solid phase and as an ecosystem. The novelty of the article study is determined by the consideration of the priority of microorganisms and water regime in soil formation, chemical-analytical identification of types of water regime, and determination of the water regime as a marker of soil genesis.