As the technical support for economic activities and social development, standards play a great role in modern society. However, with the increasing digitization of various industries, the traditional form of standards can no longer meet the needs of the new era, and there is an urgent need to digitally transform standards using advanced technologies. The digital transformation of standards involves the standard itself and all stages of its life cycle, is a very complex systematic project, in the transformation process, technology plays a key role. Therefore, this paper summarizes the key technologies involved in the process of digital transformation of standards, sorted out and evaluated them according to different purposes for which they were used, while giving the digitalization of standards transformation technology development trends and planning as well as typical cases, hoping to provide a comprehensive and clear perspective for those engaged in the related work, as well as reference for the subsequent research and application of digital transformation of standards.

Objective: To evaluate the radiographic characteristics of dentigerous cysts (DC) diagnosed at the School of Stomatology of the Universidad Peruana Cayetano Heredia (UPCH) during the period of 2010–2017. Material and methods: Retrospective, descriptive, observational and cross-sectional study, where the panoramic radiographs of 37 cases of DC were selected. Results: The total number of diagnosed cases of dentigerous cysts was 233, which after inclusion and exclusion criteria, 37 cases were obtained, of which 45.9% of cysts were found in the second decade of life with a higher frequency of 51.4 percent for women, and a jaw predilection of 59.5% in all cases. In addition, it was found that 97.3% of the cases were radiolucent, defined limits were found in 67.6%, corticalized edges in 54.1% and unilocular in 94.6%. All dentigerous cysts were associated with a tooth, of which closed apex (48.6%) and tooth displacement (59.5%) were observed. The adjacent tooth was not affected in 56.8% of cases, but its hard lamina was affected (59.5%). The 68.2% of cases did not affect the basal mandibular cortex, but did displace the inferior dental canal (54.5%) and 46.7% of cases displaced the floor of the maxillary sinus. Conclusions: Most of the results obtained on the characteristics in the Peruvian population support previous studies reported in America, Europe and Asia. Radiographically the dentigerous cyst showed characteristics that support its clearly benign behavior.

In this study, the effect of porogenic solvents on pore size distribution of the polycaprolactone (PCL) thin films was investigated. Five thin PCL films were prepared using the solvent-casting method. Chloroform, Methylene Chloride (MC) and three different compositions of MC/ Dimethylformamide (DMF) (80/20, 50/50 and 20/80) were used as solvents. Scanning Electron Microscopy (SEM) investigations were employed to study morphology and consequently the pore size distribution of the prepared films. The PCL films made by chloroform and MC as a solvent were completely non-porous. Whereas the other films (made by a combination of MC and DMF) showed both uni-modal and bi-modal pore size distributions.

Some developmental projects are created by people-private partnerships (PPP), particularly where recovery is acquirable by levying the users. Such PPPs are successful for construction of roads, bridges, running toilet facilities and conveyance facility in mode of use and pay. Likewise, public-scientist partnerships (PSPs) will be successful, where monitored impacts can be used to derive benefit. But such example cases are not so popular in utilizing new research results and derive benefits from natural resources and enhance productivity. There is a demand for similar partnership projects in research area. In this study modality of the PSP to create boost engine for natural resource conservation and bring economic prosperity is established. A novel PSP launch was synthesized on useful food crop viz. finger millet (Elusiane corcona (l)), which has been known since long past, and now is regaining popularity. It was possible to enhance additional annual production of 5.755 million tonnes of finger millet grain, equivalent to additional income of Rs 11,510 crores. Against this the scientist partnership share was 0.49x million tonnes grain and economic equivalency of Rs 992 crores, which was just 7–8%, with same level of input in agriculture. Additional benefits were sustainability of production and resources consecration, reduction of greenhouse gas emission (GHGs), particularly nitrous oxide (N₂O), largely emanating from agriculture and responsible for depletion of ozone layer. The finger millet stiff stem will be useable for production of ply-board filling material that will be innovative building material for housing and infrastructure developments and making furniture.

Land use or land cover (LU/LC) mapping serves as a kind of basic information for land resource study. Detecting and analyzing the quantitative changes along the earth’s surface has become necessary and advantageous because it can result in proper planning, which would ultimately result in improvement in infrastructure development, economic and industrial growth. The LU/LC pattern in Madurai City, Tamil Nadu, has undergone a significant change over the past two decades due to accelerated urbanization. In this study, LU/LC change dynamics were investigated by the combined use of satellite remote sensing and geographical information system. To understand the LU/LC change in Madurai City, different land use categories and their spatial as well as temporal variability have been studied over a period of seven years (1999-2006), by analyzing Landsat images for the years 1999 and 2006 respectively with the help of ArcGIS 9.3 and ERDAS Imagine 9.1 software. This results show that geospatial technology is able to effectively capture the spatio-temporal trend of the landscape patterns associated with urbanization in this region.