In this study, the influence of sewage sludge ash (SSA) waste particle contents on the mechanical properties and interlaminar fracture toughness for mode I and mode II delamination of S-glass fiber-reinforced epoxy composites was investigated. Composite laminate specimens for tensile, flexural double-cantilever beam (DCB), and end-notched fracture (ENF) tests were prepared and tested according to ASTM standards with 5, 10, 15, and 20 wt% SSA-filled S-glass/epoxy composites. Property improvement reasons were explained based on optical and scanning electron microscopy. The highest improvement in tensile and flexural strength was obtained with a 10 wt% content of SSA. The highest mode I and mode II interlaminar fracture toughness’s were obtained with 15 wt% content of SSA. The mode I and mode II interlaminar fracture toughness improved by 33% and 63.6%, respectively, compared to the composite without SSA.

Military leadership is currently an extremely popular and important aspect of managing human resources in difficult, changeable, and unpredictable conditions. The solutions used in modernly managed, well-organized, subsidized, and ethically militarized systems become a point of reference and a model for organizations that encounter perturbations in the management of the organization’s human resources. The most important of them are certainly the sense of trust of subordinates in their superiors and the leaders’ responsibility for the level of staff development. The aim of the research undertaken was to verify the thesis that can be formulated in this affirmative sentence: “A modern commander should be honorable, self-confident, and have the ability to influence his subordinates and shape friendly interpersonal contacts in the group he reports.” The literature search in the field of leadership and questionnaire research were aimed at answering the main research question: “What mental properties and behavioural features should characterize a responsible leader in military organizations?”. The work uses the diagnostic survey method, and the interview was conducted using a multi-factor survey questionnaire on a 30-person study group consisting of professional soldiers aged 25–40. The adopted age range of the study group corresponds to the period of active military service, from the age of graduation to the year of termination of active military service. The Multifactor Leadership Questionnaire is composed of two scales, creating a total of 37 randomly ordered statements in the form of single-choice questions. To analyze the distribution of answers, ranks were used to assess the degree of their compliance with the respondents’ beliefs. Based on the conclusions from the conducted research, we have grounds to believe that professional soldiers expect their leader to be helpful to their subordinates and to ensure that the soldiers are motivated to act and perform their tasks. An important behavior that is expected from the commander is the desire to have a common mission in achieving the goal. Based on the research results, it was found that an undesirable feature is the inconsistency of commanders when pointing out the mistakes of their subordinates, who do not devote interest and time to learning how to avoid mistakes and to improve the competence of their subordinates.

This paper aims to verify the possibility of utilising water-in-diesel emulsions (WiDE) as an alternative drop-in fuel for diesel engines. An 8% WiDE was produced to be tested in a four-stroke, indirect injection (IDI) diesel engine and compared to EN590 diesel fuel. An eddy current brake and an exhaust gas analyser were utilised to measure different engine parameters such as torque, fuel consumption, and emissions at different engine loads. The results show that the engine running on emulsified fuel leads to a reduction in torque and power, an increase in the specific fuel consumption, and slightly better thermal efficiency. The highest percentual increment of thermal efficiency for WiDE is obtained at 100% engine load, 5.68% higher compared to diesel. The emissions of nitric oxide (NO) and carbon dioxide (CO₂) are reduced, but carbon monoxide (CO) and hydrocarbons (HC) emissions are increased, compared to traditional diesel fuel. The most substantial decrease in NO and CO₂ levels was achieved at 75% engine load with 33.86% and 25.08% respectively, compared to diesel.

Bael or Aegle marmelos Corrêa is considered a sacred tree by Hindus and is offered to Lord Shiva while worshipping. It grows in the Indian subcontinent and Southeast Asia and is called by various names in different regions. Bael has been used as a traditional medicine in India and other Southeast Asian countries to treat various ailments, including diarrhea, chronic dysentery, constipation, gonorrhea, catarrh, diabetes, deafness, inflammations, ulcerated intestinal mucosa, intermittent fever, melancholia, heart palpitation, and also to control fertility. The ethnomedicinal properties of Bael are owing to its ability to synthesize alkaloids, cardiac glycosides, anthocyanins, flavonoids, steroids, saponins, terpenoids, tannins, lignins, quinones, coumarins, proteins, carbohydrates, amino acids, reducing sugars, fats, and oils. The aegeline, auroptene, umbelliferone, psoralene, marmin, imperatorin, xylorhamnoarabinogalactan I pectic polysaccharide and skimmianine are synthesized by different parts of Bael, and they have shown antibacterial, anti-inflammatory, analgesic, anti-allergic, anthelmintic, antidiabetic, anticancer, cardioprotective and neuroprotective activities in various experimental models. The present review has been written consulting various publications, and different websites including Google Scholar, Pubmed, ScienceDirect, and Google.

In order to explore the influence of the ferroelectric surface on the structure and properties of semiconductor oxides, the growth of CdS nanocrystals was regulated and controlled by taking single-crystal perovskite PbTiO₃ nanosheets as the substrate through a simple hydrothermal method. Through composition design, a series of PbTiO₃-CdS nanocomposite materials with different loading concentrations were prepared, and their microstructure and photocatalytic properties were systematically analyzed. Studies show that in the prepared product, CdS nanoparticles selectively grow on the surfaces of PbTiO₃ nanosheets, and their morphology is affected by the exposed surfaces of PbTiO₃ nanosheets. There is a clear interface between the PbTiO₃ substrate and CdS nanoparticles. The concentration of the initial reactant and the time of hydrothermal reaction also significantly affect the crystal morphology of CdS. Photocatalysis studies have shown that the prepared PbTiO₃-CdS nanocomposite material has a significant degradation effect on 10 mg/L of Rhodamine B aqueous solution. The degradation efficiency rises with the increase of CdS loading concentration. When degrading 10 mg/L Rhodamine B aqueous solution, the PbTiO₃-CdS sample with a mass fraction of 3% can reach a degradation rate of 72% within 120 min.

The problem of the synthesis of new type nanomaterials in the form of nano-coatings with sub-nanometric heterogeneity has been formulated. It has been presented an analysis of influences of physical vapor deposition in ultrahigh vacuum on the process of intermixing a film with a substrate, including the results, which has been obtained under the formation of transition metal – silicon interface. The generalization of the obtained experimental results develops an approach to the development of new nano-coatings with low-dimensional heterogeneity. The principles of constructing such low-dimensional nano-coatings, their properties and possible applications are considered.