In this paper, a series of Li₃V₂(PO₄)₃/C composite nanofibers is prepared by a facile and environmentally friendly electrospinning method and calcined under different temperatures. The LVP nanofiber calcined under 900 ℃ exhibits the best electrochemical performance. The bicontinuous morphologies of LVP/CNF are the fibers shrunk and the LVP crystals simultaneously grown. At the range of 3.0–4.3 V, LVP/CNF obtained under 900 ℃ delivers the initial capacity of 135 mAh/g, close to the theoretical capacity of LVP. Even at high current density, the sample of LVP/CNF still presents good electrochemical performance.

The Olefin aromatization is an important method for the upgrade of catalytic cracking (FCC) gasoline and production of fuel oil with high octane number. The nano-ZSM-5 zeolite was synthesized via a seed-induced method, a series of modified nano-ZSM-5 zeolite samples with different Ga deposition amount were prepared by Ga liquid deposition method. The XRD, N₂ physical adsorption, SEM, TEM, XPS, H₂-TPR and Py-IR measurements were used to characterize the morphology, textural properties and acidity of the modified ZSM-5 zeolites. The catalytic performance of the Hexene-1 aromatization was evaluated on a fixed-bed microreactor. The effects of Ga modification on the physicochemical and catalytic performance of nano-ZSM-5 zeolites were investigated. The Ga species in the modified nano-ZSM-5 zeolites mainly exist as the form of Ga₂O₃ and GaO⁺, which provide strong Lewis acid sites. The aromatics selectivity over Ga modified nano-ZSM-5 zeolite in the Hexene-1 aromatization was significantly increased, which could be attributed to the improvement of the dehydrogenation activity. The selectivity for aromatics over the Ga4.2/NZ5 catalyst with suitable Ga deposition amount reached 55.4%.

The porous carbon/Ni nanoparticle composite was prepared by a freeze-drying method using NaCl as the template. It was applied in the effect of the concentration, adsorption time, and temperature of adsorption on the adsorption behavior. The kinetic model and the adsorption isothermic fitting results show that the adsorption behavior fits with the pseudo-secondary dynamics and the Langmuir isothermal model, indicating that the adsorption process is monolayer adsorption. Thermodynamic results indicate that the adsorption process is spontaneous physicochemical adsorption. The fitting showed that the porous carbon/Ni nanoparticle composites reach 217.17 mg·g^-1, at 313 K indicates good adsorption for Congo red.

With the advent of knowledge economy, international competition is becoming increasingly fierce, human resources management in the role of enterprise management is growing. In the 21st century, the trend of globalization of the world economy has been strengthened, and the development of science and technology has been changing with each passing day. The essence of comprehensive national competition is becoming the competition of human resources. Similarly, enterprises in order to compete in the fierce and healthy development, we must reduce costs and improve management efficiency, must have a set of their own talent management methods. Human resources are the most important resources in all resources, effectively play the important role of human resources in the core competitiveness, and formulate the countermeasures of human resource competition, which is of great significance to improve the core competitiveness of enterprises. In the new century to further improve the management of human resources in state-owned enterprises, improve China's enterprise human resources management system is to enliven the state-owned enterprises, improve our comprehensive national strength of the top priority, to promote China's economic development is of great significance.

Using a newly-developed data set for Portugal, we analyze the industry-level effects of infrastructure investment. Focusing on the divide between traded and non-traded industries, we find that infrastructure investments have a non-traded bias, as these shift the industry mix towards private and public services. We also find that the industries that benefit the most in relative terms are all non-traded: construction, trade, and real estate, among the private services, and education and health, among the public services. Similarly, emerging trading sectors, such as hospitality and professional services, stand to gain. The positive impacts on traded industries are too small to make a difference. These results highlight that infrastructure-based strategies are not neutral in terms of the industry mix. Moreover, with most of the benefits accruing to non-traded industries, such a development model that is heavily based on domestic demand may be unsustainable in light of Portugal’s current foreign account position. 

Nothofagus pumilio forests constitute the most economically important forest stand in southern Argentina and Chile. Total volume stocking and volumetric yield vary according to site quality, degree of occupation, growth stage and forest history of the stand. The objective of this work was to evaluate the stocking and the productive potential in quantity and quality of products for the sawmilling industry, using three harvesting systems (short logs, long logs and complete shafts) in the protection cut of a N. pumilio forest of site quality III in Tierra del Fuego (Argentina). The trials were conducted in an irregular mature forest with two strata and abundant regeneration (3.0 ha; RDI 93.8–113.4%). Total volumes varied between 726.5 and 850.3 m³∙ha^-1, with a volume/basal area ratio of 11.8 to 12.1 m³∙m^-2. The harvesting rates obtained were: 45.5% for complete logs, 21.3% for long logs and 22.4% for short logs. A model was used to estimate the timber volume for each system, where full shafts resulted in a significant increase in timber volume. Considering new alternatives in the planning of harvesting in forest management for N. pumilio forests, such as the system of complete shafts, allows obtaining higher harvesting rates, increasing the benefits for the forestry company and minimizing the damage to the forest, due to the shorter distance of the machinery in the forest harvesting.