The cross wire projection welding of wires (Al 5182, = 4 mm) performed using the conventional (i.e. pneumatic) electrode force system was subjected to thorough numerical analysis. Calculations were performed until one of adopted boundary conditions, i.e., maximum welding time, maximum penetration of wires, the occurrence of expulsion or the exceeding of the temperature limit in the contact between the electrode and the welded material was obtained. It was observed that the ring weld was formed within the entire range of welding parameters. The process of welding was subjected to optimisation through the application of a new electromechanical electrode force system and the use of a special hybrid algorithm of electrode force and/or displacement control. Comparative numerical calculations were performed (using SORPAS software) for both electrode force systems. Technological welding tests were performed using inverter welding machines (1 kHz) provided with various electrode force systems. The research also involved the performance of metallographic and strength (peeling) tests as well as measurements of welding process characteristic parameters (welding current and voltage).
The welding process optimisation involving the use of the electromechanical force system and the application of the hybrid algorithm of force control resulted in i) more favourable space distribution of welding power, ii) energy concentration in the central zone of the weld, iii) favourable (desired) melting of the material within the entire weld transcrystallisation zone and iv) obtainment of a full weld nugget.

In order to improve the quality and efficiency of heat treatment in welds of power stations, this paper summarizes the current situation of 600 MW supercritical power plant welding site heat treatment and puts forward the improved methods and measures accordingly. The heat treatment of welding holes in the construction site Play a certain guiding role.

This paper mainly uses the idea of pedigree clustering analysis, gray prediction and principal component analysis. The clustering analysis model, GM (1,1) model and principal component analysis model were established by using SPSS software to analyze the correlation matrices and principal component analysis. MATLAB software was used to calculate the correlation matrices. In January, The difference in price changes of major food prices in cities is calculated, and had forecasted the various food prices in June 2016. For the first issue, the main food is classified and the data are processed. After that, the SPSS software is used to classify the 27 kinds of food into four categories by using the pedigree cluster analysis model and the system clustering. The four categories are made by EXCEL. The price of food changes over time with a line chart that analyzes the characteristics of food price volatility. For the second issue, the gray prediction model is established based on the food classification of each kind of food price. First, the original data is cumulated, test and processed, so that the data have a strong regularity, and then establish a gray differential equation, and then use MATLAB software to solve the model. And then the residual test and post-check test, have C <0.35, the prediction accuracy is better. Finally, predict the price trend in June 2016 through the function. For the third issue, we analyzed the main components of 27 kinds of food types by celery, octopus, chicken (white striped chicken), duck and Chinese cabbage by using the data of principal given and analyzed by principal component analysis. It can be detected by measuring a small amount of food, this predict CPI value relatively accurate. Through the study of the characteristics of the region, select Shanghai and Shenyang, by looking for the relevant CPI and food price data, using spss software, principal component analysis, the impact of the CPI on several types of food, and then calculated by matlab algorithm weight, and then the data obtained by the analysis and comparison, different regions should be selected for different types of food for testing.

The project of returning farmland to forest is a new project of increasing farmers' income, ecological efficiency and

benefiting the country. The key to the success of returning farmland to forest project is to strictly control the key technologies such as regional planning, forest species selection, tree species selection, good seedling, structural configuration, meticulous soil preparation, serious planting, tending and management. According to the actual

situation of Yuanling County, suitable for the tree, choose the market prospects, fast-growing tree species afforestation,

reasonable adjustment of forest structure, ecological benefits and economic benefits simultaneously, take high-

quality high-yield and efficient forestry development. Returning farmland to forest project has played huge ecological benefits, economic and social benefits.

Although infrastructure is widely recognized as a key ingredient in a country’s economic success, many issues surrounding infrastructurespending are not well understood. This paper explores six themes: the returns to infrastructure; the role of the private sector; the evaluation and delivery of infrastructure in practice; the nature of network industries, pricing and regulation; political economy considerations of infrastructure provision; and infrastructure in developing countries. This paper aims to provide insights into many of these questions, drawing on the existing literature.

Intra-regional trade serves as a key growth engine for East Asian economies. Accompanying the rapid growth of bilateral and intra-regional trade ties, the East Asian economies are becoming increasingly connected and interdependent. Infrastructure connectivity plays a crucial role in bridging different areas of the East Asian region and enabling them to reap the full socioeconomic benefits of economic cooperation and integration. Nevertheless, further improvement of infrastructure in the region faces major challenges due to the lack of effective mechanisms for coordination and dialogue on regional integration through funding infrastructure projects, as well as the serious trust deficit among member states that has arisen from the on-going territorial and historical disputes.