This research implements sustainable environmental practices by repurposing post-industrial plastic waste as an alternative material for non-conventional construction systems. Focusing on the development of a recycled polymer matrix, the study produces panels suitable for masonry applications based on tensile and compressive stress performance. The project, conducted in Portoviejo and Medellín, comprises three phases combining bibliographic and experimental research. Low-density polyethylene (LDPE), high-density polyethylene (HDPE), and polypropylene (PP) were processed under controlled temperatures to form a composite matrix. This material demonstrates versatile applications upon cooling—including planks, blocks, caps, signage, and furniture (e.g., chairs). Key findings indicate optimal performance of the recycled thermoplastic polymer matrix at a 1:1:1 ratio of LDPE, HDPE, and PP, exhibiting 15% deformation. The proposed implementation features 50 × 10 × 7 cm panels designed with tongue-and-groove joints. When assembled into larger plates, these panels function effectively as masonry for housing construction, wall cladding, or lightweight fill material for slab relieving.

Objective: To describe magnetic resonance imaging (MRI) findings of the brain in patients younger than 65 years who were studied by transcranial Doppler (TCD) with microbubble contrast, with a history of cryptogenic cerebrovascular accident (CVA) and suspected patent foramen ovale (PFO).

Materials and methods: This retrospective cross-sectional study included patients of both sexes, younger than 65 years of age.

Results: Our sample (n = 47.47% male and 53% female, mean age is 42 years) presented high-intensity transient signals (HITS) positive in 61.7% and HITS-negative in 38.3%. In HITS-positive patients, lesions at the level of the subcortical U-brains, single or multiple with bilaterally symmetrical distribution, predominated. In patients with moderate HITS, lesions in the vascular territory of the posterior circulation predominated.

Conclusion: In patients younger than 65 years with cryptogenic stroke and subcortical, single or multiple U-shaped lesions with bilateral and symmetrical distribution, a PFO should be considered as a possible cause of these lesions.

This study examined the impact of aluminium doping on the structural, electrical, and magnetic properties of Li_(0.5)Co_(0.75)Al_xFe_(2−x)O₄ spinel ferrites (x =0.15 to 0.60). The samples were synthesised using the sol-gel auto-combustion technique, and they were examined using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), dielectric measurements, and vibrating sample magnetometry (VSM). All samples possessed a single-phase cubic spinel structure with Fd-3m space group, according to XRD analyses. SEM images showed the creation of homogeneous particles with an average size of about 21 nm. All samples had spinel ferrite phases, confirmed from FTIR spectra. DC electrical conductivity studies showed that the conductivity increased with increasing aluminium content up to x = 0.45 before dropping at x = 0.60. The maximum saturation magnetization value was found at x = 0.45, according to VSM measurements, which demonstrated that the magnetic characteristics were strongly correlated with the amount of aluminium.

Knowledge of the presence of heavy metals in soils of agricultural areas is important to prevent their accumulation in cultivated plants. The objective of the present investigation was to evaluate the total concentrations and fractions of heavy metals Cd, Pb, Zn, Fe, Mn, Ni, Cu, Cr and Co in the tobacco-growing area of Pinar del Río, Cuba and their relationship with the physicochemical properties of soil. For the study, 59 samples of three types of soils were collected at 20 cm depth. The pseudo-total concentrations of metals in the soils are low and lower than the prevention values registered for Cuban soils. In general, the heavy metals studied present a high affinity for the most stable fractions of the soil, which means a low risk of transfer to the tobacco crop or accumulation in groundwater. The pseudo-total concentrations of heavy metals were low, below the alert values established for soils in the region. The heavy metals studied were mainly associated with the residual fraction, the second fraction with the highest association with metals was that linked to manganese and iron oxides. The principal component analysis showed that their main source is pedogenetic and that these elements are closely related to cation exchange capacity and calcium content.

The operational performance of container ports is crucial for efficient logistics and trade. However, there is limited understanding of how external integration through Customer and Supplier Integration (SCI-CI and SCI-SI) impacts port operational performance (POP), particularly in emerging markets like Oman. This study addresses this gap by examining the relationship between SCI-CI, SCI-SI, and POP, and explores the mediating role of supply chain management (SCM) practices in this context. Using the Resource-Based View (RBV) as the theoretical framework, the study employed a quantitative cross-sectional survey method. A total of 377 questionnaires were distributed to managers at Sohar and Salalah ports, with 331 usable responses obtained, representing an 88 percent response rate. The data were analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM). The results indicate that SCI-CI and SCI-SI have significant direct and indirect positive effects on POP, and they directly influence SCM practices. SCM practices, in turn, significantly enhance POP. Notably, SCM practices partially mediate the relationship between SCI-CI and SCI-SI with POP. These findings underscore the strategic importance of external integration and SCM practices as internal resources for improving port performance. This research provides valuable insights for decision-makers and policymakers in optimizing port operations.