An experiment was carried out to investigate the effect of different organic nutrient solutions and day of harvest on growth parameters, biomass and chemical composition of hydroponically grown sorghum red fodder. The experiment was a 3 × 2 factorial design comprising of 3 nutrient solutions (cattle, poultry and rabbit) and 2 harvesting regimes (8th and 10th day). Cattle, poultry and rabbit dungs were collected fresh and processed into nutrient solutions. Sorghum red seeds were treated, planted on trays, and irrigated twice per day with organic nutrient solution according to the treatments. Growth parameters which were investigated included fodder mat thickness, seedling height, leaf length and width, number of leaves, fresh and dry matter yield; and proximate composition. The results showed that sorghum red fodder irrigated with cattle manure nutrient solution (NS) harvested at 10 days was higher in all, except one (fodder mat thickness) of the growth parameters considered. The crude protein (CP) was highest and similar (P > 0.05) for Poultry NS harvested at 8 and 10 days, and Cattle NS at 10 days (13.13%, 12.67%, and 12.69% respectively). The ash content also favored Cattle NS at 10 days. Cattle NS at 10 days harvest was significantly (P < 0.05) the highest (7.00%), but comparable (P > 0.05) with Rabbit NS at 10 days for NDF. Fresh and DM yields were highest for Cattle harvested at 10 and 8 days respectively. The study recommends Cattle NS as hydroponic organic NS for sorghum red as it enhances fresh and dry matter yields, and nutritive values.

Bagasse fiber from sugarcane waste is used with epoxy resin to make natural composites. The raw fibers are treated chemically to improve compatibility and adherence with the epoxy polymer. It’s anticipated that epoxy resin matrix composites reinforced with bagasse particles would work as a trustworthy replacement for conventional materials utilized in the building and automobile sectors. The amount and distribution of reinforcing particles inside the matrix are two factors that impact the composite’s strength. Furthermore, the precise proportion of reinforcing elements—roughly 20–30 weight percent—into the matrix plays a critical role in providing a noticeable boost in improving the properties of the composites. This research investigates the impact of reinforcing alkali-treated bagasse and untreated bagasse powder into an epoxy matrix on aspects of mechanical and morphological characteristics. The hand layup technique is used to create alkali-treated bagasse and untreated bagasse powder-reinforced epoxy composites. Composites are designed with six levels of reinforcement weight percentages (5%, 10%, 15%, 20%, 25%, and 30%). Microstructural analysis was performed using SEM and optical microscopes to assess the cohesion and dispersion of the reinforcing particles throughout the hybrid composites’ matrix phase. With reinforcement loading up to 20 wt%, the tensile strength, impact strength, and toughness of epoxy-alkali-treated bagasse and untreated bagasse powder-reinforced composites increased. In contrast, treated bagasse epoxy composites were superior to untreated epoxy composites in terms of efficacy. The results indicate that 20 wt% alkali bagasse powder provides better mechanical properties than other combinations.

In the realm of modern education, the integration of technology has emerged as a powerful catalyst for transforming traditional classrooms into dynamic and engaging learning environments. This paper provides a concise overview of the multifaceted ways in which technology contributes to enhanced classroom engagement.

In today’s manufacturing sector, high-quality materials that satisfy customers’ needs at a reduced cost are drawing attention in the global market. Also, as new applications are emerging, high-performance biocomposite products that complement them are required. The production of such high-performance materials requires suitable optimization techniques in the formulation/process design, not simply mixing natural fibre/filler, additives, and plastics, and characterization of the resulting biocomposites. However, a comprehensive review of the optimization strategies in biocomposite production intended for infrastructural applications is lacking. This study, therefore, presents a detailed discussion of the various optimization approaches, their strengths, and weaknesses in the formulation/process parameters of biocomposite manufacturing. The report explores the recent progress in optimization techniques in biocomposite material production to provide baseline information to researchers and industrialists in this field. Therefore, this review consolidates prior studies to explore new areas.