This research study explores the addition of chromium (Cr⁶⁺) ions as a nucleating agent in the alumino-silicate-glass (ASG) system (i.e., Al₂O₃-SiO₂-MgO-B₂O₃-K₂O-F). The important feature of this study is the induction of nucleation/crystallization in the base glass matrix on addition of Cr⁶⁺ content under annealing heat treatment (600 ± 10 °C) only. The melt-quenched glass is found to be amorphous, which in the presence of Cr⁶⁺ ions became crystalline with a predominant crystalline phase, Spinel (MgCr₂O₄). Microstructural experiment revealed the development of 200–500 nm crystallite particles in Cr⁶⁺-doped glass-ceramic matrix, and such type microstructure governed the mechanical properties. The machinability of the Cr-doped glass-ceramic was thereby higher compared to base alumino-silicate glass (ASG). From the nano-indentation experiment, the Young’s modulus was estimated 25(±10) GPa for base glass and increased to 894(±21) GPa for Cr-doped glass ceramics. Similarly, the microhardness for the base glass was 0.6(±0.5) GPa (nano-indentation measurements) and 3.63(±0.18) GPa (micro-indentation measurements). And that found increased to 8.4(±2.3) (nano-indentation measurements) and 3.94(±0.20) GPa (micro-indentation measurements) for Cr-containing glass ceramic.

Vision statements are seen as important factors that come before the development of strategies. They excel at encapsulating the strategic direction of a company, clearly defining its scope, boundaries, and the process of creating value. Vision statements function as comprehensive frameworks that guide the development of several strategic elements, including mission, strategic capabilities, strategic intent, objectives, goals, core values, standards of behavior, and business models. However, research on this subject remains scanty, particularly within academia. Therefore, this study examined the impact of university vision on staff effectiveness, building on transformational leadership theory and strategic leadership theory. The study adopted a positivist research philosophy. The research employed a cross-sectional study design. This study employed a descriptive research design. Questionnaires were devised by the researcher to collect data from a randomly selected group of 186 academic personnel from the four colleges in a private university using stratified sampling. The data obtained was subject to validity checks using composite reliability, the average variance extracted (AVE) estimate, and the Cronbach Alpha coefficient. The findings reveal that the vision of the university had a significant but weak impact on the effectiveness of staff. Based on the findings and conclusions, the study suggests that the university’s organizational vision should be consistently improved and effectively conveyed to staff members to direct their efforts toward achieving the university’s vision.

Phytomediation is an environmentally friendly green rehabilitation technology that is often incorporated with an application to improve calcium peroxide and phytohormones required for the growth of agricultural plants with the expectation to improve the effectiveness of plant rehabilitation. This study mainly consists of two parts: (1) water culture experiment and (2) pot culture experiment. In the water culture experiment, we attempt to understand the influence of the addition of calcium peroxide, phytohormones (IAA and GA₃) and a chelating agent on the growth of sunflower plants. However, in the pot culture experiment, when hormones and the chelating agent EDTA are introduced to different plant groups at the same time, if the nutrition in the water required by plants is not available, the addition of the hormone cannot negate the toxicity caused by EDTA. In terms of calcium peroxide, due to quick release of oxygen in water, this study fails to apply calcium peroxide to the water culture experiment.

When the pot culture experiment is used to examine the influence of hormones at different concentration levels on the growth of sunflowers, GA₃ 10^-8 M is reported to have the optimal effectiveness, followed by IAA 10^-8 M; IAA 10^-12 M has the lowest effectiveness. According to an accumulation analysis of heavy metals at different levels, GA₃ concentrates in leaves to transport nutrition in soil to leaves. This results in an excellent TF value of 2.329G of GA₃ than 1.845 of the control group indicating that the addition of the hormone and chelating agent to GA₃ increases the TF value and the chelating agent is beneficial to the sunflower plant. If we examine phytoattenuation ability, the one-month experiment was divided into three stages for ten days each. The concentration level of heavy metals in the soil at each stage dropped continuously while that of the control group decreased from 31.63 mg/kg to 23.96 mg/kg, GA₃ from 32.09 mg/kg to 23.04 mg/kg and EDTA from 30.65 mg/kg to 25.93 mg/kg indicating the quickest growth period of the sunflowers from the formation of the bud to blossom. During the stage, the quick upward transportation of nutrition results in quick accumulation of heavy metals; the accumulated speed of heavy metals is found higher than that of directly planted plants. This study shows an improvement in the effectiveness of the addition of hormones on plant extraction and when rehabilitation is incorporated with sunflowers with the beginning bud formation, better treatment effectiveness can be reached.

This paper aims to explore the practice and effect of integrating ideological and politics in higher vocational mathematics education. Through the review of relevant literature and the analysis of practical cases, this study analyzes the necessity and feasibility of integrating ideological and political education into higher vocational mathematics teaching, as well as the promoting effect of students' ideological and political education. At the same time, it also discusses how to effectively combine the curriculum thinking and politics with higher vocational mathematics teaching, as well as the strategies and methods to achieve positive results, in order to provide some reference for the majority of higher vocational mathematics teachers.

With the purpose of strengthening the knowledge and prevention of landslide disasters, this work develops a methodology that integrates geomorphological mapping with the elaboration of landslide susceptibility maps using geographic information systems (GIS) and the multiple logistic regression method (MLR). In Mexico, some isolated works have been carried out with GIS to evaluate slope stability. However, to date, no practical and standardized method has been developed to integrate geomorphological maps with landslide inventories using GIS. This paper shows the analysis carried out to develop a multitemporal landslide inventory together with the morphometric analysis and mapping technique for the El Estado River basin where, selected as the study area, is located on the southwestern slope of the Citlaltepetl or Pico de Orizaba volcano. The geological and geomorphological factors in combination with the high seasonal precipitation, the high degree of weathering and the steep slopes predispose its surfaces to landslides. To assess landslide susceptibility, a landslide inventory map was prepared using aerial photographs, followed by geomorphometric mapping (altimetry, slopes and geomorphology) and field work. With this information, landslide susceptibility was modeled using multiple logistic regression (MLR) within a GIS platform and the landslide susceptibility map was obtained.

This research aims to do the assessing the feasibility of the Public-Private Partnership project in investing in the construction of the Palu-Parigi By-pass road through a PPP financing scheme, thereby providing opportunities for the private sector to participate in the provision of special road infrastructure. In this context, experimental criteria for determining Value for Money (VFM) are applied using the PPP model, to evaluate projects. The main objective also emphasizes the provision of greater VFM Goods through private financing, through conventional methods that are economical, efficient and effective. Furthermore, financial performance measurement reports apply several methods, including Payback Period (PP), Net Present Value (NPV), and Internal Rate of Return (IRR) which determine the feasibility and time required for returns on invested capital. The previous Economic Feasibility Study of the Palu-Parigi By-pass Road Construction project also showed an EIRR value of 20.1% in 2014, illustrating the economic development of this work. In connection with the limitations currently faced by the Regional Budget Agency of Central Sulawesi Province, the next PPP scheme is recommended for road construction by prioritizing infrastructure completion after the 28 September 2018 earthquake and the COVID-19 pandemic. The DBFMT (Design–Build–Finance–Maintenance–Transfer) model was also applied to the project, with GCA responsible for design, construction, financing, periodic maintenance and transfer at the end of the collaboration agreement.