Deficiencies in postharvest technology and the attack of phytopathogens cause horticultural products, such as tomatoes to have a very short shelf life. In addition to the economic damage, this can also have negative effects on health and the environment. The objective of this work is to evaluate an active coating of sodium alginate in combination with eugenol-loaded polymeric nanocapsules (AL-NP-EUG) to improve the shelf life of tomato. Using the nanoprecipitation technique, NPs with a size of 171 nm, a polydispersity index of 0.113 and a zeta potential of −2.47 mV were obtained. Using the HS-SPME technique with GC-FID, an encapsulation efficiency percentage of 31.85% was determined for EUG. The shelf-life study showed that the AL-NP-EUG-treated tomatoes maintained firmness longer than those without the coating. In addition, the pathogenicity test showed that tomatoes with AL-NP-EUG showed no signs of damage caused by the phytopathogen Colletotrichum gloesporoides. It was concluded that the formulation of EUG nanoencapsulated and incorporated into the edible coating presents high potential for its application as a natural nanoconservative of fruit and vegetable products such as tomato.

The cultivation of sugar beet (Beta vulgaris L.) for table or horticultural purposes is largely carried out in the conventional way which is characterized by intense mechanization causing soil degradation and high labor costs. New cultivation techniques are being employed in the production of vegetables aiming to ensure improvements in environmental and economic conditions, such as the no-till farming system. Thus, the objective of this work was to evaluate the vegetable classification and physicochemical characteristics of beets from different corn planting densities. The experiment was conducted in the period from October 2018 to June 2019 in the municipality of Nova Laranjeiras (PR). Corn was used as a cover plant and the vegetable used was beet cultivar Early Wonder Tall Top. The experimental design used was in interspersed blocks in unifactorial scheme (corn densities 40, 60, 80, 100 thousand plants/ha and control) with four blocks, with plots 3.60 m long and 1.20 m wide. The parameters evaluated 60 days after planting were: commercial classification (class, group, subgroup, category), length, diameter, mass, pulp firmness, soluble solids, titratable acidity, pH and ratio, phenolic compounds. Of which the variables that were not significant at 0.5 probability were length, category (defects), firmness, subgroup (flesh color), soluble solids and phenolic compounds. It is concluded that high densities of corn as mulch for SPDH of sugar beet crop negatively affect the grade and physicochemical characterization of the products.

The importance of improving industrial transformation processes for more efficient ones is part of the current challenges. Specifically, the development of more efficient processes in the production of biofuels, where the reaction and separation processes can be intensified, is of great interest to reduce the energy consumption associated with the process. In the case of Biodiesel, the process is defined by a chemical reaction and by the components associated to the process, where the thermochemical study seeks to develop calculations for the subsequent understanding of the reaction and purification process. Thus, the analysis of the mixture of the components using the process simulator Aspen Plus V9^® unravels the thermochemical study. The UNIFAC-DMD thermodynamic method was used to estimate the binary equilibrium parameters of the reagents using the simulator. The analyzed aspects present the behavior of the components in different temperature conditions, the azeotropic behavior and the determined thermochemical conditions.

The heat collection evaporator was modeled based on equilibrium homogeneous theory, and the Runge-Kutta calculation method was used to analyze and solve the flow in the heat collection evaporator. The influence of environmental factors such as solar irradiance, ambient temperature and wind speed on the variation of refrigerant pressure in two kinds of heat collecting evaporator was analyzed under the set working conditions. The results show that the solar energy irradiance has a great influence on the pressure drop in the tube of serpentine heat collecting evaporator, and the maximum pressure drop of the refrigerant in the tube is 16.3%, minimum pressure drop is 7.8%. However, it has little influence on the pressure drop of the tube sheet evaporator. The maximum pressure drop in the refrigerant tube of the tube sheet evaporator is 4.8%, minimum pressure drop is 1.8%. When the irradiance reaches 800 W/m², the refrigerant in the serpentine-tube evaporator has been completely vaporized at 6 m, it’s completely vaporized at 3 m.

The objective of the work was to evaluate and compare the physicochemical characteristics of an experimental cabotiá hybrid with the commercial hybrid Tetsukabuto. The genotypes were divided according to mass (kg), and were evaluated for quality. The color parameters evaluated showed no significant difference, although visually the hybrid was different from the commercial variety. It was possible to conclude that the size of the fruits does not influence the concentration of the compounds, and also, an inferiority of HC05 was observed with respect to the relevant quality characteristics in pumpkins, such as soluble solids content, carotenoids and vitamin C.

This paper applies Nida's dynamic equivalence theory to the appreciation of Hardy's masterpiece Tess of the D 'Urbervilles, discusses the translation of the meaning and spirit of the source text in terms of dialects, idioms and annotations from the perspective of functional equivalence theory, and further explores whether the spirit and value felt by the readers of the target text is dynamically equivalent to that felt by the readers of the source text. Finally, this paper shows the clever application of this theory and the determination to promote cultural exchange through Tess of the D 'Urbervilles.