Forest fire, as a discontinuous ecological factor of forest, causes the changes of carbon storage and carbon distribution in forest ecosystem, and affects the process of forest succession and national carbon capacity. Taking the burned land with different forest fire interference intensity as the research object, using the comparison method of adjacent sample plots, and taking the combination of field investigation sampling and indoor test analysis as the main means, this paper studies the influence of different forest fire interference intensity on the carbon pool of forest ecosystem and the change and spatial distribution pattern of ecosystem carbon density, and discusses the influence mechanism of forest fire interference on ecosystem carbon density and distribution pattern. The results showed that forest fire disturbance reduced the carbon density of vegetation (P < 0.05). The carbon density of vegetation in the light, moderate and high forest fire disturbance sample plots were 67.88, 35.68 and 15.50 t∙hm^-2, which decreased by 15.86%, 55.78% and 80.79% respectively compared with the control group. In the light, moderate and high forest fire disturbance sample plots, the carbon density of litter was 1.43, 0.94 and 0.81 t∙hm^-2, which decreased by 28.14%, 52.76% and 59.30% respectively compared with the control group. The soil organic carbon density of the sample plots with different forest fire disturbance intensity is lower than that of the control group, and the reduction degree gradually decreases with the increase of soil profile depth. The soil organic carbon density of the sample plots with light, moderate and high forest fire disturbance is 103.30, 84.33 and 70.04 t∙hm^-2 respectively, which is 11.670%, 27.899% and 40.11% lower than that of the control group respectively; the carbon density of forest ecosystem was 172.61, 120.95 and 86.35 t∙hm^-2 after light, moderate and high forest fire disturbance, which decreased by 13.53%, 39.41% and 56.74% respectively compared with the control group; forest fire disturbance reduced the carbon density of eucalyptus forest, which showed a law of carbon density decreasing with the increase of forest fire disturbance intensity. Compared with the control group, the effect of light forest fire disturbance intensity on the carbon density of eucalyptus forest was not significant (P > 0.05), while the effect of moderate and high forest fire disturbance intensity on the carbon density of eucalyptus forest was significant (P < 0.05).

Context: Noise in the work environment, in all types of productive activities, represents a hazard and has not really been valued in its real dimension. Little has been seen that stakeholders have determined the urgency of managing noise control programs. Therefore, losses resulting from medical treatment and absenteeism, represented in health care and social services, result in hidden work-related costs that directly affect the gross domestic product in any country.

Method: This article compiles different case studies from around the world. The studies were divided for review into general studies on the effects of workforce noise and then particularized according to the effects of industrial noise on workers’ health. At a control level, the assessment and measurement of noise is defined through the use of tools such as noise maps and their respective derivations, in addition to spatial databases.

Results: According to the collection of information and its analysis, we observe that in the medium term, the economies will be diminished in an important percentage due to the consequences generated by the exposure to noise. Specific information can be found in the development of the article.

Conclusions: The data provided by the case studies point to the need for Colombia, a country that is no stranger to this phenomenon, and which additionally has the great disadvantage of not having significant studies in the field of noise analysis, should strengthen studies based on spatial data as a mechanism for measurement and control.

Financing: Fundación universitaria Los Libertadores.

The study of the performance of high-efficiency heat pump systems has been a hot issue of general interest in the field of heat pump air conditioning. For the designed and developed two-stage casing tandem heat exchanger of heat pump system, the 3D finite volume method and the realizable k-ε model are used to numerically analyze the influence law of inlet fluid temperature and flow velocity on the overall heat transfer coefficient as well as the Nussle number of inner and outer tubes. The results show that decreasing the inlet water temperature or increasing the inlet refrigerant temperature can improve the overall heat transfer performance; Nu_in increases with the increase of water and refrigerant flow rates, while Nu_out increases with the increase of water flow rate but decreases with the increase of refrigerant flow rate; Nu_in and Nu_out both increase with the decrease of water temperature or refrigerant temperature increases.

Taking the geographic information industry as the research object, using the authorized invention patent data, this paper puts forward the research method of industrial innovation chain structure based on the geographic information industry chain. Then, from the perspective of overall structure and specific regional structure, the development status of the innovation chain is quantitatively evaluated, which is helpful to all countries in the world. The structural integrity and leading links of the innovation chain especially in China, the United States and Japan are compared and analyzed. The results show that: (1) from the perspective of the overall structure, the global innovation chain presents an “inverted triangle” structure due to the weak innovation ability of downstream links. From the perspective of specific regional structure, the innovation chain of geographic information industry in most countries and regions is incomplete, and there are broken links or isolated links. The global innovation chain except China has cracks between the upstream and downstream due to the relative weakness of the midstream links, showing “hourglass-shaped” structure with a wide upper part, narrow lower part and narrow middle part. (2) Relatively speaking, China’s industrial innovation chain is relatively complete, and the midstream link has significant comparative advantages in the global market. However, the industry university research cooperation in the innovation chain is weak, the degree of marketization is low, and the technological competitiveness lags behind that of the United States.

In the past three decades, nanotechnology has attracted extensive attention. People have many expectations on the utilization of nanotechnology in medicine, but unfortunately, these expectations are unlikely to be realized. In the field of nanotechnology, the niche for building commercial products has not been developed yet. However, metal nanoparticles have attracted people’s attention since ancient times because of their optical properties, which are very different from those of bulk metals. By understanding the origin of these optical properties and using current technology, these nanoparticles can be manipulated to build a palette. Using micro measurement equipment, the palette can be printed with very good resolution.

To deal with problems of traditional geographic information collection, such as low real-time, poor authenticity of the data, and unclear description of detailed areas, a design scheme of remote sensing-based geographic information system is proposed. The system mainly consists of information collection, imaging processing, data storage management, scene control and data transmission module. By use of remote sensing technology, the reflected and radiated electromagnetic waves of the target area are collected from a long distance to form an image, and the hue–intensity–saturation (HIS) transformation method is used to enhance the image definition. Weighted fusion algorithm is adopted to process the details of the image. The spatial database stores and manages the text and image data respectively, and establishes the attribute self-correlation mechanism to render the ground objects in the picture with SketchUp software. Finally, using RS422 protocol to transmit information can achieve the effect of multi-purpose, and enhance the anti-interference of the system. The experimental results show that the practical experience of the proposed system is excellent, the geographic information image presented is clear, and the edge details are clearly visible, which can provide users with effective geographic information data.