One crucial metric for estimating a reservoirs and dam’s lifespan is sedimentation. It is dependent upon sediment output, which in turn is dependent upon soil erosion. The study area, the Aguat Wuha Dam, was located in Simada woreda, of northwestern parts of Ethiopia. And the study's goal was to use Arc GIS and RUSLE adjusted to Ethiopian conditions to assess potential soil erosion and sediment output from the watershed and identify hotspot locations for appropriate planning for erosion and sedimentation problem management techniques to make the outputs of the dam project more productive and effective for the proposed and suggested purpose of the dam. To predict the geographical patterns of soil erosion in the watershed, the Geographic Information System (GIS) was combined with the revised universal soil loss equation (RUSLE). A soil erosion map was produced using ArcGIS by utilizing all of the model's parameters, including Erosivity, erodibility, steepness, land use, land cover, and supportive practice factors. The watershed's yearly soil loss varies from 0 to 413.86 tons/ha. In order to determine the erosion hotspot area, the average annual soil loss value was discovered to be 9.24 tons/ha/year and was categorized into six erosion severity classes: low, moderate, high, very high, severe, and very severe. These findings indicated that 162.57 ha and 699.17 ha of the watershed were considered to be extremely and severely vulnerable to soil erosion, respectively. It was discovered that the anticipated sediment yield supplied to the outlet varied from 0 to 104.94 tons/ha/year. By standing from the implications of the assessments of the geological, geotechnical, topographical, and socioenvironmental considerations Watershed management is the most effective way to reduce the amount of sediment produced and the amount that enters the reservoir among the several reservoir sedimentation control options that are available.

The study focused on investigating the effects of varying levels of HA (HA₁ = 0, HA₂ = 25, HA₃ = 50, HA₄ = 75, and HA₅ = 100) on Red Dragon, Red Prince, and Red Meat varieties of red radish. This analysis aimed to unravel the relationship between different levels of HA and their impact on the growth and productivity of red radish genotypes. The findings revealed that the Red Prince genotype attained the utmost plant height of 24.00 cm, an average of 7.50 leaves per plant, a leaf area of 23.11 cm², a canopy cover of 26.76%, a leaf chlorophyll content of 54.60%, a leaf fresh weight of 41.16 g, a leaf dry weight of 8.20 g, a root length measuring 9.73 cm, a root diameter of 3.19 mm, a root fresh weight of 27.60 g, a root dry weight of 6.75 g, and a remarkable total yield of 17.93 tons per hectare. The implications of this study are poised to benefit farmers within the Dera Ismail Khan Region, specifically in the plain areas of Pakistan, by promoting the cultivation of the Red Prince variety.

International logistics supply chain is an important guarantee to support the country to build a new development pattern, this paper aims to propose a new strategy to promote the development of international logistics supply chain through the case study of Ningbo City. On the basis of supply chain theory and international logistics theory, this paper constructs SWOT model to study the case of Ningbo City, and draws the following conclusions: The international logistics supply chain of Ningbo city has the advantages of superior geographical location, perfect logistics infrastructure and strong port resources, and the disadvantages of low logistics informatization level and logistics management mode to be optimized. At the same time, it faces the opportunities of “One Belt and One Road” initiative and the competitive threat of other logistics centers. Adopting strategies such as policy support, strengthening logistics informatization construction and optimizing logistics management mode can ensure the stable development of foreign trade, which is conducive to accelerating the construction of a new development pattern and modern economic system in which domestic and foreign cycles promote each other.

Hydroponics is a modern agricultural system that enables year-round plant growth. Biochar, derived from apple tree waste, and humic acid were investigated as a replacement for the Hoagland nutrient solution to grow strawberries in a greenhouse with three replications. Growth parameters, such as leaf area, the average number of fruits per plant, maximum fruit weight, and the weight of fresh and dry fruits, were measured. A 50% increase in fresh and dry fruit weight was observed in plants grown using biochar compared to the control. Additionally, the use of Hoagland chemical fertilizer led to a 25% increase in both fresh and dry weight. There was a 65% increase in the number of fruits per plant in the biochar-grown sample compared to the control. Moreover, biochar fertilizer caused a 100% increase in maximum fruit weight compared to the control and a 27% increase compared to the Hoagland chemical fertilizer. Biochar had a higher pH compared to the Hoagland solution, and such pH levels were conducive to strawberry plant growth. The results indicate that biochar has the potential to enhance the size and weight of fruits. The findings of the study demonstrate that biochar, when combined with humic acid, is a successful organic hydroponic fertilizer that improves the quality and quantity of strawberries. Moreover, this approach enables the more efficient utilization of garden waste.

This study aimed to examine and assess the impact of the logistics industry’s environment, entry-level graduates’ characteristics and the logistics and supply chain management (LSCM) program design on the transformation of knowledge and skills at Sohar port in the Sultanate of Oman. The study employed a pragmatic research philosophy involving a structured questionnaire. The sample size included 49 mid-managers from the logistics industry who were working at Sohar Port. The study found that entry-level graduates’ characteristics and LSCM program design positively and significantly influenced the transformation of knowledge and skills. However, the organisational environment had a negative and insignificant impact on the transformation. This study revealed several dimensions that may require further research. It is pertinent to broaden the research scope to other towns, ports, and other countries in the Gulf Council Countries (GCC) to broaden the scope and generalisability of the results. According to the study findings, several recommendations are proposed for the logistics and supply chain sector in Oman to enhance the transformation of knowledge and skills by entry-level graduates, as well as for higher education institutions (HEIs). To meet the sector requirements, HEIs may improve the current university-industry collaborations by increasing the inputs of the industry in designing and developing the LSCM program. The organisational environment must reconsider the knowledge and skills transformation by entry-level graduates in their strategic plan of resources management, which must be emphasised by the remuneration system and career paths incentive. While other studies have explored knowledge and skill transformation in the context of employee training, this study aims to fill a specific research gap by focusing on the transformation of knowledge and skills by entry-level graduates, an area which has not been extensively studied before. Furthermore, this study is unique as it examines the impact of the industry’s environment, entry-level graduates’ characteristics and the LSCM program on the transformation of knowledge and skills within the unique context of Oman. This novel approach provides an opportunity to understand the specific challenges and opportunities faced by entry-level graduates in Oman and suggests strategies for addressing them.

Finding the right technique to optimize a complex problem is not an easy task. There are hundreds of methods, especially in the field of metaheuristics suitable for solving NP-hard problems. Most metaheuristic research is characterized by developing a new algorithm for a task, modifying or improving an existing technique. The overall rate of reuse of metaheuristics is small. Many problems in the field of logistics are complex and NP-hard, so metaheuristics can adequately solve them. The purpose of this paper is to promote more frequent reuse of algorithms in the field of logistics. For this, a framework is presented, where tasks are analyzed and categorized in a new way in terms of variables or based on the type of task. A lot of emphasis is placed on whether the nature of a task is discrete or continuous. Metaheuristics are also analyzed from a new approach: the focus of the study is that, based on literature, an algorithm has already effectively solved mostly discrete or continuous problems. An algorithm is not modified and adapted to a problem, but methods that provide a possible good solution for a task type are collected. A kind of reverse optimization is presented, which can help the reuse and industrial application of metaheuristics. The paper also contributes to providing proof of the difficulties in the applicability of metaheuristics. The revealed research difficulties can help improve the quality of the field and, by initiating many additional research questions, it can improve the real application of metaheuristic algorithms to specific problems. The paper helps with decision support in logistics in the selection of applied optimization methods. We tested the effectiveness of the selection method on a specific task, and it was proven that the functional structure can help the decision when choosing the appropriate algorithm.