In view of the large energy consumption of the regeneration process in the chemical absorption decarburization process, on the basis of the enrichment classification flow process, the nanoscale ceramic film is used as a new heat exchanger between the enriched liquid and the regeneration gas. The porous ceramic film is capable of coupling thermal-mass transfer to effectively recover part of the water vapor and the heat carried in the regeneration gas, so as to reduce the regenerative energy consumption of the system. The effects of parameters such as regeneration temperature, flow rate, molar fraction of water vapor, and MEA enrichment temperature, flow rate, and MEA concentration of shunt on the hydrothermal recovery effect of ceramic membranes of different pore sizes and lengths were studied by using the heat recovery flux and water recovery rate as the indicators. The results show that the hydrothermal recovery performance of the ceramic membrane increases with the increase of MEA enrichment flow, but decreases significantly with the increase of the enrichment temperature. At the same time, with the increase of regenerative gas velocity and the molar fraction of water vapor in the regenerative gas, the heat recovery flux will increase. The heat recovery performance of the 10 nm ceramic membrane is better than that of the 20 nm ceramic membrane.

Context: Noise in the work environment, in all types of productive activities, represents a hazard and has not really been valued in its real dimension. Little has been seen that stakeholders have determined the urgency of managing noise control programs. Therefore, losses resulting from medical treatment and absenteeism, represented in health care and social services, result in hidden work-related costs that directly affect the gross domestic product in any country.

Method: This article compiles different case studies from around the world. The studies were divided for review into general studies on the effects of workforce noise and then particularized according to the effects of industrial noise on workers’ health. At a control level, the assessment and measurement of noise is defined through the use of tools such as noise maps and their respective derivations, in addition to spatial databases.

Results: According to the collection of information and its analysis, we observe that in the medium term, the economies will be diminished in an important percentage due to the consequences generated by the exposure to noise. Specific information can be found in the development of the article.

Conclusions: The data provided by the case studies point to the need for Colombia, a country that is no stranger to this phenomenon, and which additionally has the great disadvantage of not having significant studies in the field of noise analysis, should strengthen studies based on spatial data as a mechanism for measurement and control.

Financing: Fundación universitaria Los Libertadores.

This work was carried out with the purpose of generating ecological and silvicultural information oriented to sustainable management. The horizontal structure was evaluated using the importance value index of Curtis and Macintosh, the vertical structure using Finol’s methodology. Through the sociological position index, the percentage natural regeneration and the extended importance value index were estimated in order to infer the permanence of the forest ecosystem. The floristic composition was represented by species of the families Anacardiaceae, Apocynaceae, Fabaceae, Santalaceae, Rhamnaceae, Sapotaceae, Simarubaceae, Ulmaceae, Zygophyllaceae, Capparidaceae, Borraginaceae and Achatocarpaceae. In the horizontal structure, the species with the highest rank was Acacia praecox, followed in order of importance by Schinopsis balansae, Aspidosperma quebracho blanco and Prosopis kuntzei. According to sociological position, Acacia praecox was the most representative species, followed by Patagonula americana, Schinus longifolius, Proposis kuntzei and Aspidosperma quebracho blanco. The species with the best regeneration values were Achatocarpus nigricans and Acacia praecox in the shrub layer and Patagonula americana in the tree layer. The extended importance index consolidated the category of Acacia praecox in the community and gave a better category to Schinopsis balansae, Aspidosperma quebracho blanco, Prosopis kuntzei and Patagonula americana.

Cucumis sativus is an important vegetable crop in the world. Agrobacterium mediated transgenic technology is an important means to study plant gene function and variety improvement. In order to further accelerate the transgenic research and breeding process of cucumber, aiming at the Agrobacterium mediated genetic transformation method of cucumber, this paper expounds the research progress and existing problems of Agrobacterium mediated transgenic cucumber from the aspects of influencing factors of cucumber regeneration ability, genetic transformation conditions and various added substances in the process, and prospects the future of improving the efficiency of cucumber genetic transformation and the application of safety screening markers, in order to provide reference for cucumber stress resistance breeding and fruit quality improvement.

Two kinds of solar thermal power generation systems (trough and tower) are selected as the research objects. The life cycle assessment (LCA) method is used to make a systematic and comprehensive environmental impact assessment on the trough and tower solar thermal power generation. This paper mainly analyzes the three stages of materials, production and transportation of two kinds of solar thermal power generation, calculates the unit energy consumption and environmental impact of the three stages respectively, and compares the analysis results of the two systems. At the same time, Rankine cycle is used to compare the thermal efficiency of the two systems.