Problem: in recent years, new studies have been published on biological effects of strong static magnetic fields and on thermal effects of high-frequency electromagnetic fields as used in magnetic resonance imaging (MRI). Many of these studies have not yet been incorporated into current safety recommendations. Method: scientific publications from 2010 onwards on the biological effects of static and electromagnetic fields of MRI were searched and evaluated. Results: new studies confirm older work that has already described effects of static magnetic fields on sensory organs and the central nervous system accompanied by sensory perception. A new result is the direct effect of Lorentz forces on ionic currents in the semicircular canals of the vestibular organ. Recent studies on thermal effects of radiofrequency fields focused on the development of anatomically realistic body models and more accurate simulation of exposure scenarios. Recommendation for practice: strong static magnetic fields can cause unpleasant perceptions, especially dizziness. In addition, they can impair the performance of the medical personnel and thus potentially endanger patient safety. As a precaution, medical personnel should move slowly in the field gradient. High-frequency electromagnetic fields cause tissues and organs to heat up in patients. This must be taken into account in particular for patients with impaired thermoregulation as well as for pregnant women and newborns; exposure in these cases must be kept as low as possible.

Objective: To evaluate the radiographic characteristics of dentigerous cysts (DC) diagnosed at the School of Stomatology of the Universidad Peruana Cayetano Heredia (UPCH) during the period of 2010–2017. Material and methods: Retrospective, descriptive, observational and cross-sectional study, where the panoramic radiographs of 37 cases of DC were selected. Results: The total number of diagnosed cases of dentigerous cysts was 233, which after inclusion and exclusion criteria, 37 cases were obtained, of which 45.9% of cysts were found in the second decade of life with a higher frequency of 51.4 percent for women, and a jaw predilection of 59.5% in all cases. In addition, it was found that 97.3% of the cases were radiolucent, defined limits were found in 67.6%, corticalized edges in 54.1% and unilocular in 94.6%. All dentigerous cysts were associated with a tooth, of which closed apex (48.6%) and tooth displacement (59.5%) were observed. The adjacent tooth was not affected in 56.8% of cases, but its hard lamina was affected (59.5%). The 68.2% of cases did not affect the basal mandibular cortex, but did displace the inferior dental canal (54.5%) and 46.7% of cases displaced the floor of the maxillary sinus. Conclusions: Most of the results obtained on the characteristics in the Peruvian population support previous studies reported in America, Europe and Asia. Radiographically the dentigerous cyst showed characteristics that support its clearly benign behavior.

Aiming at the problem of road network multi-scale matching, a multi-scale road matching method under the constraint of road mesh of small-scale data has been proposed. First, two road meshes with different scale data are constructed; Secondly, under the constraint of the small-scale road mesh, the composite mesh composed of several road meshes in the large-scale road is extracted, and the mesh matching with the small-scale road mesh is completed; Then, many-to-many matching of road meshes with different scales is realized; finally, the matching relationship between composite mesh and small-scale road mesh is transformed into the matching between multi-scale road mesh boundary roads and internal roads, and the matching of the whole road network is completed. The experimental results show that this method can better realize the matching of multi-scale road network.

To deal with problems of traditional geographic information collection, such as low real-time, poor authenticity of the data, and unclear description of detailed areas, a design scheme of remote sensing-based geographic information system is proposed. The system mainly consists of information collection, imaging processing, data storage management, scene control and data transmission module. By use of remote sensing technology, the reflected and radiated electromagnetic waves of the target area are collected from a long distance to form an image, and the hue–intensity–saturation (HIS) transformation method is used to enhance the image definition. Weighted fusion algorithm is adopted to process the details of the image. The spatial database stores and manages the text and image data respectively, and establishes the attribute self-correlation mechanism to render the ground objects in the picture with SketchUp software. Finally, using RS422 protocol to transmit information can achieve the effect of multi-purpose, and enhance the anti-interference of the system. The experimental results show that the practical experience of the proposed system is excellent, the geographic information image presented is clear, and the edge details are clearly visible, which can provide users with effective geographic information data.

[Objective] To understand the relationship between species diversity and tree growth in natural secondary forests in Northeast China, to determine the reasonable size of species diversity, and to carry out appropriate nurturing harvesting and artificial replanting, so as to provide a scientific and theoretical basis for secondary forest management and management. [Methods] A total of 123 sample plots were set up in the Xiaoxinganling (XXAL), Zhangguangcailing (ZGCL), Laojialing (LYL), Changbai Mountain (CBS), Hadaling (HDL) and Longgang Mountain (LGS) areas in Northeast China, they were used to investigate the species composition, importance value, diversity and tree growth in each area. [Results] A total of 48 species belonging to 17 families and 31 genera were investigated in all the sample plots, among which the sample plots in Longgang Mountain contained the largest number of families, genera and species, followed by Hada Ling, Changbai Mountain, Laoyaling, Zhangguangcai Mountain and Xiaoxinganling. The α-diversity index of species in the sample sites was the largest in Changbai Mountain and the smallest in Xiaoxinganling, and the difference between them was significant (P < 0.05), while the richness index was the largest in Longgang Mountain and the smallest in Xiaoxinganling. The difference between them was significant (P < 0.05), while the greater the difference in latitude between the regions, the more obvious the difference in β-diversity index of species in the sample sites, and the fewer species shared between the two regions. The higher the rate of community succession, the higher the average diameter at breast height and the average tree height in each region were CBS > LYL > LGS > ZGCL > HDL > XXAL. The largest breast tree species in each region was Mongolian oak in Changbai Mountain with a diameter at breast height of 64.8 cm, and the smallest breast tree species in each region was Tyrannus sylvestris in Longgang Mountain with a diameter at breast height of 4.0 cm. The highest tree species in each region was Liriodendron sylvestris in Longgang Mountain with a height of 28.9 m, and the smallest species is yellow pineapple with a height of 1.3 m in Longgang Mountain. [Conclusion] Within a certain range, species diversity has a facilitating effect on the average diameter at breast height and average tree height of species within a stand. Therefore, during the management of secondary forests, appropriate nurturing harvesting and artificial replanting should be adopted to ensure reasonable species diversity in the stands and provide optimal space for the growth of natural secondary forests.

Nanoparticle drug delivery systems are engineered technologies that use nanoparticles for the targeted delivery and controlled release of therapeutic agents. Cisplatin-loaded nanoparticle formulations were optimized utilizing response surface methods and the central composite rotating design model. This study employed a central composite rotatable design with a three-factored factorial design with three tiers. Three independent variables namely drug polymer ratio, aqueous organic phase ration, and stabilizer concentration were used to examine the particle size, entrapment efficiency, and drug loading of cisplatin PLGA nanoparticles as responses. The results revealed that this response surface approach might be able to be used to find the best formulation for the cisplatin PLGA nanoparticles. A polymer ratio of 1:8.27, organic phase ratio of 1:6, and stabilizer concentration of 0.15 were found to be optimum for cisplatin PLGA nanoparticles. Nanoparticles made under the optimal conditions found yielded a 112 nm particle size and a 95.4 percent entrapment efficiency, as well as a drug loading of 9 percent. The cisplatin PLGA nanoparticles tailored for scanning electon microscopy displayed a spherical form. A series of in vitro tests showed that the nanoparticle delivered cisplatin progressively over time. According to this work, the Response Surface Methodology (RSM) employing the central composite rotatable design may be successfully used to simulate cisplatin-PLGA nanoparticles.