Boron and tungsten carbides, B₄C and WC, are hard materials widely used in modern technologies. Further improvement of their performance characteristics involves the development of new B₄C and WC-based and/or related composites in a nanodispersed state. This article provides a review of available literature research on B-C-W systems, which would be useful in future studies in this direction.

The United Nations General Assembly declared 2023 the “International Year of Millets” in order to promote millet cultivation, consumption, and conservation. Millets play an important role in food security, livelihoods, and biodiversity. Despite its numerous benefits, millet cultivation and consumption in Uttarakhand have declined due to a variety of constraints. This paper examines the effects of regiocentrism and materialism on intention towards Uttarakhand’s regional food products (millets). It employs PLS-SEM to investigate relationships between latent variables and generate results on a sample of 460 participants. This study elucidates the intricate interplay between materialism, regiocentrism, and intention towards regional food products in the Himalayan region, enriching the theory of planned behavior (TPB) with a nuanced understanding of personal values and regional identity. It reveals materialism’s positive association with attitudes towards regional food products, suggesting materialistic individuals may view these products as status symbols, thus affecting behavioral intentions. Additionally, the research highlights regiocentrism’s dual influence—enhancing attitudes yet deterring purchase intentions—underscoring the complexity of regional pride in consumer decision-making. These findings advance TPB by integrating broader value systems and cultural context, offering significant theoretical and practical insights for promoting sustainable consumption patterns.

The issue of academic achievement among Chinese university students is emerging due to difficulties in finding employment. This study investigates the structural relationships between social support, goal orientation, and academic achievement with the aim of enhancing students’ academic performance and facilitating sustained employability. Data were collected from 202 college students in South China, revealing that students’ levels of social support, goal orientation, and academic achievement were all moderate. Lower-grade students, in comparison to higher-grade students, exhibited lower levels of social support, goal orientation, and academic achievement. Additionally, students from lower economic backgrounds tended to lack social support. Among the factors of social support, goal orientation, and academic achievement, there were positive correlations among these three variables. Social support significantly and positively influenced goal orientation and academic achievement. Specifically, the sub-factors of social support, school support, and teacher support had differential effects, with school support enhancing academic achievement and teacher support boosting goal orientation. Goal orientation also significantly and positively impacted students’ academic achievement, with the sub-factor of mastery goals having a stronger influence. Goal orientation partially mediated the relationship between social support and academic achievement. This study discusses limitations and provides insights for future research.

An appraisal of the groundwater potential of Alex Ekwueme Federal University Ndufu Alike was carried out by integrating datasets from geology, geographic information system and electrical resistivity survey of the area. The study area is underlain by the Asu River group of Albian age. The Asu River Group in the Southern Benue Trough comprises of Shales, Limestones and Sandstone lenses of the Abakaliki Formation in Abakaliki and Ikwo areas. The shales are generally weathered, fissile, thinly laminated and highly fractured and varies between greyish brown to pinkish red in colour. Twenty (20) Vertical Electrical Sounding data were acquired using SAS 1000 ABEM Terrameter and processed to obtain layer parameters for the study area. A maximum current electrode spacing (AB) of 300 meters was used for data acquisition. Computer aided iterative modelling using IPI2 Win was used to determine layer parameters. In-situ Hydraulic Conductivity measurements at seven parametric locations within the study area were conducted and integrated with Electrical Resistivity measurements to determine aquifer parameters (e.g., Hydraulic conductivity and Transmissivity) in real time. This technique reduces the attendant huge costs associated with pumping tests and timelines required to carry out the technique. Accurate delineation of aquifer parameters and geometries will aid water resource planners and developers on favourable areas to site boreholes in the area. Several correlative cross-sections were generated from the interpreted results and used to assess the groundwater potential of the study area. Results show that the resistivity of the the aquifer ranges from 7.3 Wm–530 Wm while depth to water ranges from 11.4 m to 55.3 m. Aquifer thicknesses range from 8.7 m at VES 5 to 36.3 m at VES 6 locations. Hydraulic conductivity ranges from 1.55 m/day at VES 15.18, and 19 locations to 9.8 m/day at VES 3 and 4 locations respectively. Transmissivity varies from 17.48 m²/day at VES 19 to 98 m²/day at VES 3 locations respectively. Areas with relatively high transmissivities coupled with good aquifer thicknesses should be the target of water resource planners and developers when proposing sites for drilling productive boreholes within Alex Ekwueme federal University Ndufu Alike.

Breast cancer was a prevalent form of cancer worldwide. Thermography, a method for diagnosing breast cancer, involves recording the thermal patterns of the breast. This article explores the use of a convolutional neural network (CNN) algorithm to extract features from a dataset of thermographic images. Initially, the CNN network was used to extract a feature vector from the images. Subsequently, machine learning techniques can be used for image classification. This study utilizes four classification methods, namely Fully connected neural network (FCnet), support vector machine (SVM), classification linear model (CLINEAR), and KNN, to classify breast cancer from thermographic images. The accuracy rates achieved by the FCnet, SVM, CLINEAR, and k-nearest neighbors (KNN) algorithms were 94.2%, 95.0%, 95.0%, and 94.1%, respectively. Furthermore, the reliability parameters for these classifiers were computed as 92.1%, 97.5%, 96.5%, and 91.2%, while their respective sensitivities were calculated as 95.5%, 94.1%, 90.4%, and 93.2%. These findings can assist experts in developing an expert system for breast cancer diagnosis.

Bagasse fiber from sugarcane waste is used with epoxy resin to make natural composites. The raw fibers are treated chemically to improve compatibility and adherence with the epoxy polymer. It’s anticipated that epoxy resin matrix composites reinforced with bagasse particles would work as a trustworthy replacement for conventional materials utilized in the building and automobile sectors. The amount and distribution of reinforcing particles inside the matrix are two factors that impact the composite’s strength. Furthermore, the precise proportion of reinforcing elements—roughly 20–30 weight percent—into the matrix plays a critical role in providing a noticeable boost in improving the properties of the composites. This research investigates the impact of reinforcing alkali-treated bagasse and untreated bagasse powder into an epoxy matrix on aspects of mechanical and morphological characteristics. The hand layup technique is used to create alkali-treated bagasse and untreated bagasse powder-reinforced epoxy composites. Composites are designed with six levels of reinforcement weight percentages (5%, 10%, 15%, 20%, 25%, and 30%). Microstructural analysis was performed using SEM and optical microscopes to assess the cohesion and dispersion of the reinforcing particles throughout the hybrid composites’ matrix phase. With reinforcement loading up to 20 wt%, the tensile strength, impact strength, and toughness of epoxy-alkali-treated bagasse and untreated bagasse powder-reinforced composites increased. In contrast, treated bagasse epoxy composites were superior to untreated epoxy composites in terms of efficacy. The results indicate that 20 wt% alkali bagasse powder provides better mechanical properties than other combinations.