The provision of infrastructure and related services in developing Asia via public–private partnership (PPP) increased rapidly during the late 1990s. Theoretical arguments support the potential economic benefits of PPPs, but empirical evidence is thin. This paper develops a framework identifying channels through which economic gains can be derived from PPP arrangement. The framework helps derive an empirically tractable specification that examines how PPPs affect the aggregate economy. Empirical results suggest that increasing the ratio of PPP investment to GDP improves access to and quality of infrastructure services, and economic growth will potentially be higher. But this optimism is conditional, especially on the region’s efforts to further upgrade its technical and institutional capacity to handle complex PPP contracts.

Recent research efforts have increasingly concentrated on creating innovative biomaterials to improve bone tissue engineering techniques. Among these, hybrid nanomaterials stand out as a promising category of biomaterials. In this study, we present a straightforward, cost-efficient, and optimized hydrothermal synthesis method to produce high-purity Ta-doped potassium titanate nanofibers. Morphological characterizations revealed that Ta-doping maintained the native crystal structure of potassium titanate, highlighting its exciting potential in bone tissue engineering.

Modelling and simulation have now become standard methods that serve to cut the economic costs of R&D for novel advanced systems. This paper introduces the study of modelling and simulation of the infrared thermography process to detect defects in the hydroelectric penstock. A 3-D penstock model was built in ANSYS version 19.2.0. Flat bottom holes of different sizes and depths were created on the inner surface of the model as an optimal scenario to represent the subsurface defect in the penstock. The FEM was applied to mimic the heat transfer in the proposed model. The model’s outer surface was excited at multiple excitation frequencies by a sinusoidal heat flux, and the thermal response of the model was presented in the form of thermal images to show the temperature contrast due to the presence of defects. The harmonic approximation method was applied to calculate the phase angle, and its relationship with respect to defect depth and defect size was also studied. The results confirmed that the FEM model has led to a better understanding of lock-in infrared thermography and can be used to detect subsurface defects in the hydroelectric penstock.

The environmental issue of single-use plastic is extremely discussed due to waste accumulation and the consumption of non-renewable resources. This study aims to investigate the properties of bioplastic compared to petroleum-based plastic. Two stages of stretch blow molding were used to fabricate polyethylene terephthalate (PET) and bio-polyethylene terephthalate (Bio-PET) bottles. The shelf life extension of chili sauce paste stored in PET and Bio-PET containers with an oxygen scavenger at 45 ℃ in an accelerated condition was investigated. After twelve weeks, the chili sauce paste stored in the container bottle was observed. PET and Bio-PET bottles without oxygen scavengers were also determined as a control for comparison. The result showed that both PET and Bio-PET bottles with oxygen scavengers could prolong the quality of chili sauce paste similarly, meaning that PET could be replaced by Bio-PET as a chili sauce paste container. Other properties, such as thickness gauge, color, leak test, drop test, and close-open force of the container bottle, were also verified to check the product quality standard.