This paper presents a coupling of the Monte Carlo method with computational fluid dynamics (CFD) to analyze the flow channel design of an irradiated target through numerical simulations. A novel series flow channel configuration is proposed, which effectively facilitates the removal of heat generated by high-power irradiation from the target without necessitating an increase in the cooling water flow rate. The research assesses the performance of both parallel and serial cooling channels within the target, revealing that, when subjected to equivalent cooling water flow rates, the maximum temperature observed in the target employing the serial channel configuration is lower. This reduction in temperature is ascribed to the accelerated flow of cooling water within the serial channel, which subsequently elevates both the Reynolds number and the Nusselt number, leading to enhanced heat transfer efficiency. Furthermore, the maximum temperature is observed to occur further downstream, thereby circumventing areas of peak heat generation. This phenomenon arises because the cooling water traverses the target plates with the highest internal heat generation at a lower temperature when the flow channels are arranged in series, optimizing the cooling effect on these targets. However, it is crucial to note that the pressure loss associated with the serial structure is two orders of magnitude greater than that of the parallel structure, necessitating increased pump power and imposing stricter requirements on the target container and cooling water pipeline. These findings can serve as a reference for the design of the cooling channels in the target station system, particularly in light of the anticipated increase in beam power during the second phase of the China Spallation Neutron Source (CSNS Ⅱ).

The creation of points where law, politics and education policies take intersection is a very complex and dynamic environment determined by philosophical shifts, economic problems, and social dynamics. This study dissects various complicated challenges facing the process of the framing of educational policies and their implementation which have become rampant due to the rapid political transformations. The researched evaluation is applied via both qualitative and quantitative methods, including juridical research, case and best practices studies and surveys, with the descriptive nature of the research as the main tool. The heart of the essay is three main themes - the contention between the rigidity of the academic standards and the holistic growth of students, its possible effects when students are too identified with a test-centric approach as their knowledge is sacrificed for their test scores, and the inclusion of rights and protections for underrepresented populations even when faced with a government’s resistance. Similarly, the research examines the perils of creating legislation too quickly, especially, because of unexpected side effects and interpretation conflicts. Findings show profound demographic differentials over districts which implies the designing and implementation of policies need to be modified accordingly. Unless a certain policy brings the best outcomes in the learning process, then nobody should choose it even if it means disrupting student well-being and decreasing their involvement. It is also emblematic of how cross-party cooperation and stakeholders’ understanding are important aspects of fairly dealing with complicated policy environments.

Background: Globally, unpaid carers face economic and societal pressures. Unpaid carers’ support is valued at £132 billion a year in the United Kingdom (UK) alone. However, this care comes at a high cost for the carers themselves. Carers providing round the clock care are more than twice as likely to be in bad health than non-carers. These carers are therefore proportionately more likely to need statutory services such as health care provision. It is critical that carers are better supported to be involved in the shaping, delivery and evaluation of the services they receive. Unfortunately, qualitative evidence on how carer organisations can do this better is scarce. Methods: Working collaboratively with a community-based carers organization, we undertook a qualitative study. Purposive sampling was used to recruit 23 participants. Online, semi-structured, one-to-one interviews were conducted with carers, community organization staff and stakeholders to ascertain their experience and views on the involvement service. Results: Firstly, there are a range of benefits resulting from the involvement service. The carers see the service as an opportunity to connect with other carers and share their views and ideas. Secondly, staff and service providers also reported how involvement gave a platform for carers and was of value in helping them shape needs-led services. Thirdly, we found that barriers to good involvement include the lack of a clearly understood, shared definition of involvement as well as the lack of a diverse pool of carer representatives available for involvement activities. Conclusion: The findings from our study provide important insights into how carers, staff and service stakeholders view barriers and enablers to good involvement. The findings will be of interest to a range of community-based organizations interested in further involving members of their community in shaping the services they receive.

This academic paper explores the impact of multi-entity cooperation on the effectiveness of public service provision in China. It examines the social governance pattern proposed by the 19th National Congress of the CCP and the emphasis on co-building, co-governing, and sharing. The paper highlights the need for collaboration among various entities and the transition from sole government provision to improve urban public services. It aims to investigate the moderating effects of institutions, policies, and public participation. The study will involve quantitative and qualitative phases in three cities in Guangdong Province and target governmental departments, commercial organizations, non-profit social organizations, and local residents. The research aims to provide policy recommendations, innovate institutional policies, enhance public engagement, and improve multi-party cooperation and urban public services. It seeks to contribute practical models and measures for effective government public management and service implementation.

The urgency of adapting urban areas to the increasing impacts of climate change has prompted the scientific community to seek new approaches in partnership with public entities and civil society organizations. In Malaysia, Penang Island has developed a nature-based urban climate adaptation program (PNBCAP) seeking to increase urban resilience, reduce urban heat and flooding, strengthening social resilience, and build institutional capacity. The project includes a strong knowledge transfer component focused on encouraging other cities in the country to develop and implement adaptation policies, projects, and initiatives. This research develops a model adopting the most efficient processes to accelerate the transfer of knowledge to promote urban adaptation based on the PNBCAP. The methodology is developed based on a review of literature focused on innovation systems and change theories. The integration of success strategies in adaptation contributes to informing the creation of solutions around the alliance of local, state, and national government agencies, scientific institutions, and civil society organizations, in a new framework designated the Malaysian Adaptation Sharing Hub (MASH). MASH is structured in 3-steps and will function as an accelerator for the implementation of urban climate adaptation policies, with the target of creating 2 new adaptation-related policies to be adopted annually by each city member, based on knowledge gathered in the PNBCAP. It is concluded that, to speed up urban adaptation, it is necessary to reinforce and promote the sharing of knowledge resulting from or associated with pilot projects.

This study evaluated the efficiency and productivity of the manufacturing industries of Singapore. Singapore is one of the world’s most competitive countries and manufacturing giants. All 21 manufacturing industries as classified by Singapore’s Department of Statistics were included in the study as decision-making units (DMUs). Using the Malmquist DEA on data spanning 2015–2021, we found that excerpt for the Paper and Paper product industry, all industries recorded positive total factor productivity (TFP). TFP ranged from 0.977 to 1.481. In terms of technical efficiency, 14 out of 21 industries showed positive efficiency change. The highest TFP was recorded in 2020 and the lowest in 2016. By measuring and improving efficiency, industries in Singapore can achieve cost savings, increase output, and enhance their competitiveness in the global marketplace. In addition, efficiency measurement can help policymakers identify potential areas for improvement and develop targeted policies to promote sustainable economic growth. Given these benefits, performance measurement is inevitable for industries and policymakers in Singapore to achieve economic objectives. Manufacturing industries need to find ways to manage the size and scale of operations as we flag this as an area for improvement.