The effective drainage radius of coal seam is an important basis for the spacing of pre-drainage gas boreholes. To quickly and accurately determine the effective drainage radius, a new method was proposed. For the coal face where the desorbable gas content before mining has met the standard, the compliance of mine gas drainage rate was used as the basis to determine the effective drainage radius. The fluid-structure interaction model was constructed, numerical simulation of coal seam gas drainage was carried out by using COMSOL software, and the model was validated by combining the field test results. The results show that the new method has the advantage of short cycle. With the extension of drainage time, the increase of effective drainage radius gradually decreases, and finally reaches a relatively stable limit value, which conforms to the Langmuir function. The average error between numerical simulation and field test values of effective drainage radius is 4.9%, which proves that the model is reliable. This model can accurately predict the effective drainage radius under different coal seam gas contents and drainage times. The research results provide a new mean for determining the effective drainage radius of coal seam and the layout of gas drainage boreholes.

In order to meet the guidance, publicity and commercial functions, various types of billboards have become important permanent facilities in the airport terminal, which are distributed all over the terminal. The advertising materials inside billboards have certain fire hazards, and there is a lack of research on the fire risk of advertising materials at present. Therefore, it is necessary to study the fire risk of advertising materials in airport terminal. Taking PVC board, a commonly used advertising material, as the research object, Pyrosim was used to model and analyze its fire, and the characteristics of fire spread, smoke flow, and distribution of combustion products such as CO and CO2 in the terminal building were obtained. This study explores the fire combustion characteristics of advertising materials in civil airport terminals, providing a basis for fire prevention management in civil airport terminals.

In this study, we consider the extended Brinkman's-Darcy model for a triple diffusive convection system which consists of some parameters such as Taylor number (Ta), Solutal Rayleigh numbers (RC1 , RC2 ), and Prandtl number (Pr). To investigate the range of these parameters, a dynamical system of the Ginzburg-Landau equation is developed. The parametric analysis and comparative study of the model for the three Rayleigh numbers which leads to the clear fluid layer, sparsely packed porous layer, and densely packed porous layer is done with the help of bifurcation maps and the Lyapunov exponents. It is found that for a certain range of parameters, the system exhibits a chaotic behaviour.

The last decades have offered new challenges to researchers worldwide through the problems our planet is facing both in the environment protection field and the need to replace fossil fuels with new environmentally friendly alternatives. Bioenergy as a form of renewable energy is an acceptable option from all points of view and biofuels due to their biological origin have the ability to satisfy the new needs of humanity. By releasing some non-polluting combustion products into the atmosphere, biofuels have already been adopted as additives in traditional liquid fuels, being intended mainly for internal combustion engines of automobiles. The current work proposes an extension of biofuels application in combustion processes specific to industrial furnaces. This technical concern is not found in the literature, except for achievements of the research team involved in this work, which has performed previous investigations. A 51.5 kW-burner was designed to operate with glycerine originating from triglycerides of plants and animals, mixed with ethanol, an alcohol produced by the chemical industry recently used as an additive in gasoline for automobile engines. Industrial oxygen was chosen as the oxidizing agent necessary for the liquid mixture combustion, allowing to obtain much higher flame temperatures compared to the usual combustion processes using air. Mixing glycerine with ethanol in 8.8 ratio allowed growing flame stability, accentuated also by creating swirl currents in the flame through the speed regime of fluids at the exit from the burner body. Results were excellent both through the flame stability and low level of polluting emissions.

Heat transfer augmentation procedures, such as Heat Transfer Enhancement and Intensification, are commonly used in heat exchanger systems to enhance thermal performance by decreasing thermal resistance and increasing convective heat transfer rates. Swirl-flow devices, such as coiled tubes, twisted-tape inserts, and other geometric alterations, are commonly used to create secondary flow and improve the efficiency of heat transfer. This study aimed to explore the performance of a heat exchanger by comparing its performance with and without the use of twisted-tape inserts. The setup consisted of a copper inner tube measuring 13 mm in inner diameter and 15 mm in outer diameter, together with an outer pipe measuring 23 mm in inner diameter and 25 mm in outer diameter. Mild steel twisted tapes with dimensions of 2 mm thickness, 1.2 cm width, and twist ratios of 4.3 and 7.2 were utilised. The findings indicated that the heat transfer coefficient was 192.99 W/m² °C when twisted-tape inserts were used, while it was 276.40 W/m² °C without any inserts. The experimental results closely aligned with the theoretical assumptions, demonstrating a substantial enhancement in heat transfer performance by the utilisation of twisted-tape inserts. The study provides evidence that the utilisation of twisted-tape inserts resulted in a nearly two times increase in the heat transfer coefficient, hence demonstrating their efficacy in augmenting heat transfer.

Biomass production (BIO) and its anomalies were modeled using MODIS satellite images and gridded weather data to test an environmental monitoring system in the biomes Atlantic Forest (AF) and Caatinga (CT) within SEALBA, an agricultural growing region bordered by the states of Sergipe (SE), Alagoas (AL), and Bahia (BA), Northeast Brazil. Spatial and temporal variations on BIO between these biomes were strongly identified, with the annual long-term averages (2007–2023) for AF and CT of 78 ± 22 and 58 ± 17 kg ha−1 d−1, respectively. BIO anomalies were detected through its standardized indexes—STD (BIOSTD), comparing the results for the years from 2020 to 2023 with the long-term rates from 2007 to each of these years. The highest negative BIOSTD values were in 2023, but concentrated in CT, indicating periods with the lowest vegetation growth, regarding the long-term conditions from 2007 to 2023. The largest positive BIOSTD values were for the AF biome in 2022, evidencing the highest vegetative vigor in comparison with the long-term period 2007–2022. The proposed BIO monitoring system is important for environmental policies as they picture suitable periods and places for agricultural and forestry explorations, allowing sustainable managements under climate and land-use changes conditions, with possibilities for replication of the methods in other environmental conditions.