In order to understand the finishing effect of Waterborne Acrylic Paint under different painting methods and amount, bamboo-laminated lumber for furniture was coated with waterborne acrylic paint, then the effects of different painting methods and amount on the drying rate, smoothness, hardness, adhesion and wear resistance of the paint film were investigated. Further, the mechanism of film formation was described by thermal property analysis using thermogravimetry and differential scanning calorimeter. The results show that different painting methods have little effect on film properties, the drying time of primer and topcoat are not affected by them, which is 8/8.5 min for primer surface/solid and 6.5/7 min for topcoats. The film surface hardness and adhesion can reach B and 0 grade, the best wear resistance of the film is 51.24 mg·100 r⁻¹ when using one-layer primer one-layer topcoat. Different coating amount has great influence on film properties, the drying speed of the film increases with the increase of the painting amount. The film properties reach the best when the painting amount is 80 g/m², while too little painting amount leads to the decrease of hardness, and too much leads to the wear resistance weaken. Thermal analysis of the primer and topcoat show that water decomposition occurs at 100 ℃ and thermal decomposition of organic components occur at 350 ℃. Topcoats have better thermal stability than primers higher than that of topcoat, the topcoat displayed better thermal stability than the primer.

The Intellectual Property (IP) chapter of the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) is recognized for its extensive coverage, encompassing a broad range of innovation areas such as patents, trademarks, geographical indications, and copyright. This chapter sets a new global benchmark for IP protection, posing significant challenges to the existing legal frameworks of member countries and necessitating rapid adaptation, particularly for developing members like Vietnam, Malaysia, and Mexico. These nations have undertaken comprehensive revisions to their IP laws to align with the international standards established by the CPTPP. Despite their unique national contexts, the legal amendments reflect distinct strategies and methodologies in meeting international standards. This paper conducts a qualitative analysis of Vietnam, Malaysia, and Mexico, comparing their law amendment strategies, contents, and techniques across three dimensions. It highlights the distinctive characteristics and impacts of their legal revisions, offering valuable insights for other prospective developing members within the CPTPP framework on the practice of IP law reform.

This paper investigates the transformative role of Artificial Intelligence (AI) in enhancing infrastructure governance and economic outcomes. Through a bibliometric analysis spanning more than two decades of research from 2000 to 2024, the study examines global trends in AI applications within infrastructure projects. The analysis reveals significant research themes across diverse sectors, including urban development, healthcare, and environmental management, highlighting the broad relevance of AI technologies. In urban development, the integration of AI and Internet of Things (IoT) technologies is advancing smart city initiatives by improving infrastructure systems through enhanced data-driven decision-making. In healthcare, AI is revolutionizing patient care, improving diagnostic accuracy, and optimizing treatment strategies. Environmental management is benefiting from AI’s potential to monitor and conserve natural resources, contributing to sustainability and crisis management efforts. The study also explores the synergy between AI and blockchain technology, emphasizing its role in ensuring data security, transparency, and efficiency in various applications. The findings underscore the importance of a multidisciplinary approach in AI research and implementation, advocating for ethical considerations and strong governance frameworks to harness AI’s full potential responsibly.

Road accidents involving motorcyclists significantly threaten sustainable mobility and community safety, necessitating a comprehensive examination of contributing factors. This study investigates the behavioral aspects of motorcyclists, including riding anger, sensation-seeking, and mindfulness, which play crucial roles in road accidents. The study employed structural equation modeling to analyze the data, utilizing a cross-sectional design and self-administered questionnaires. The results indicate that riding anger and sensation-seeking tendencies have a direct impact on the likelihood of road accidents, while mindfulness mitigates these effects. Specifically, mindfulness partially mediates the relationships between riding anger and road accident proneness, as well as between sensation-seeking and road accident proneness. These findings underscore the importance of effective anger management, addressing sensation-seeking tendencies, and promoting mindfulness practices among motorcyclists to enhance road safety and sustainable mobility. The insights gained from this research are invaluable for relevant agencies and stakeholders striving to reduce motorcycle-related accidents and foster sustainable communities through targeted interventions and educational programs.

The environmental issue of single-use plastic is extremely discussed due to waste accumulation and the consumption of non-renewable resources. This study aims to investigate the properties of bioplastic compared to petroleum-based plastic. Two stages of stretch blow molding were used to fabricate polyethylene terephthalate (PET) and bio-polyethylene terephthalate (Bio-PET) bottles. The shelf life extension of chili sauce paste stored in PET and Bio-PET containers with an oxygen scavenger at 45 ℃ in an accelerated condition was investigated. After twelve weeks, the chili sauce paste stored in the container bottle was observed. PET and Bio-PET bottles without oxygen scavengers were also determined as a control for comparison. The result showed that both PET and Bio-PET bottles with oxygen scavengers could prolong the quality of chili sauce paste similarly, meaning that PET could be replaced by Bio-PET as a chili sauce paste container. Other properties, such as thickness gauge, color, leak test, drop test, and close-open force of the container bottle, were also verified to check the product quality standard.

The R3A Route represents a collaborative initiative involving the governments of Thailand, Laos, and China aimed at bolstering connectivity along the North-South Economic Corridor, as a vital component of the Greater Mekong Subregion Economic Cooperation Program (GMS). Since its inception in 2008, this endeavor has substantially enhanced the logistical framework between Thailand, Laos, and China. However, it has also revealed an imbalance in the benefit distribution of value chains within the tourism industry. One of the fact that, local stakeholders in each country often leverage their home country’s advantages, leading to the exploitation of counterparts with lower capacity in other nations. This unfair utilization goes against the initial intentions of fostering collaboration among these countries. Given China and its development as a starting point for tourism and its popularity among tourists traveling this route, this study provides a comprehensive analysis of China’s policy and insights of its influences on R3A tourism development in Laos and Thailand. The study constructs a content analysis with an umbrella of stakeholder analysis based on reliable data and is cross-verified through data triangulation. The findings lead to recommendations aimed at making Thai-Lao-Chinese tourism cooperation more sustainable and effective.