Cobalt-based sulfides have emerged as promising candidates for next-generation high-performance anode materials for lithium-ion batteries (LIBs) due to their high theoretical specific capacity and reversible conversion reaction mechanisms. However, their practical application is hindered by volume expansion effects and relatively low rate performance. Guided by theoretical principles, this study synthesizes nanoscale Bi/CoS-C and Bi/Co4S3-C (denoted as Bi/CS-C) composite materials using Co and Bi2S3 as precursors via a solid-state ball milling method. The electrochemical properties of these materials were systematically investigated. When employed as anodes for LIBs, Bi/CoS-C and Bi/CS-C exhibit excellent rate capabilities. At current densities of 0.1, 0.5, 1, 4, and 10 A/g, the reversible capacities of Bi/CoS-C were 939.2, 730.7, 655.6, 508.1, and 319 mAh/g, respectively. In contrast, Bi/CS-C exhibited reversible capacities of 760.4, 637.6, 591.9, 484.3, and 295.4 mAh/g, respectively. Moreover, Co4S3, as an active component, enables superior long-cycle performance compared to CoS. After 300 cycles at 0.2 A/g, the Bi/CoS-C and Bi/CS-C electrodes retained capacities of 193.1 and 788.8 mAh/g, respectively. This study demonstrates that nanostructure design and carbon-based composite materials can effectively mitigate the volume expansion issue of cobalt-based sulfides, thereby enhancing their rate performance and cycling stability. This strategy provides new insights for the development of high-performance anode materials for lithium-ion batteries and is expected to accelerate their practical application in next-generation energy storage devices.

There is a growing emphasis on employee engagement in organizations and academia. It is reflected through an increasing number of academic publications that explores the link between human resource management practices and employee engagement. The present study investigates this relationship using bibliometric analysis. It is crucial to understand how human resource management practices influence employee engagement for creating a more productive and engaged workforce. The publications that focused on “human resource management” and “employee engagement” between 1996 and 2023 were analysed using the Biblioshiny package in R from the Web of Science (WoS) database. The analysis examined the existing research trends and also included comparative analysis across different geographic regions. It identified the emerging trends in human resource management research and the interconnectedness of various sub-disciplines within human resource management. This study offers a comprehensive analysis of the relationship between human resource management practices and employee engagement that revealed new avenues for future research and collaboration within the human resource management field. In other words, it will certainly provide valuable insights for future research agendas.

Industrial heritage is a legacy from the past that we live with today and pass on to future generations. The economic value of this heritage can be defined as the amount of welfare that it generates for society, and this value should not be ignored. However, current research based on economic analysis has mostly focused on qualitative statements instead of quantitative assessment. This study proposes an innovative methodology combining qualitative (field research) and quantitative (willingness to pay and contingent valuation) methods to assess the economic value of industrial heritage. The industrial heritage of Tangshan, China, was chosen as a case study, and the research found that museums and cultural creative parks are effective ways to conserve industrial heritage. The entrance fee can be used to represent the economic value of the heritage site. There was a positive correlation between the influence of economic value and the entrance fees residents would prefer to pay. The results indicate the locals would prefer lower entrance fees for the transformed heritage museums (The average current cost: $2.23). Locals were most concerned about the entrance fees for the Kailuan Coal Mine and Qixin Cement Plant Museums, which have both been renewed as urban landmarks for city tourism. Renewal methods have been applied to six industrial heritage sites in Tangshan; these sites have their own conservation and renewal practices based on city-level development or industrial attributes. Thus, when residents recognize the economic value of a heritage site, they are willing to pay a higher entrance fee. This research demonstrates the economic value of industrial heritage using a mixed methods approach and provides a basis for assessing the value of cultural heritage for urban tourism analysis.

Background: In an increasingly globalized world, public health is a challenge in the future of health systems. Nursing is a fundamental profession in health systems and the purpose of the study is to quantify the scientific production in global public health carried out by nursing to demonstrate its competence, capacity and specialization in this subject. Methods: A bibliometric study was carried out to understand the scientific production of public health nursing in WoS. A total of 17,545 documents were analyzed using Bibliometrix software in version 4.0.5. Results: A notable increase in production is observed over time, a sign of specialization and capacity. The theme focuses on three stages: hygiene and sanitation, infectious diseases and quality, prevention and non-communicable diseases coinciding with the real social needs of each moment. Most of the production is in English and produced by countries with developed economies. Nursing is aligned with current public health needs. Conclusions: Bibliometrics is a good method to quantify scientific production. The results show extensive scientific production in public health nursing, which translates into extensive knowledge of public health by nursing. There is a growth in production in accordance with time as well as an adaptation to the most current themes in accordance with population needs. Public health is an area of concern to countries and nursing can actively participate in studies, planning and leadership of health systems. Public health nursing should not be considered relegated to medicine but independent and of crucial importance to the “Onehealth” concept. Public, private and educational administrations must promote and support nursing research in public health, and it is not advisable to reduce the teaching load of global public health in nursing studies, in favor of the family and community environment.

Recently, the government of Ethiopia has been engaged in modernizing the trans-regional Ethio-Djibouti railway infrastructure using the Belt and Road Initiative. This railway corridor has been serving as the main get way for the landlocked Ethiopia to the port. This article creates an insight about the implications of the Ethio-Djibouti railway corridor by exploring the question: what kinds of urban form and morphological changes evolved due to the railway corridor? To examine the impact of this railway corridor, the article employed stratified sampling and multiple criteria intermediate cities selection method. Accordingly, four (Bishoftu, Mojo, Adama, and Dire Dawa) intermediate cities were selected as case study. The article points out that the railway corridor conceived different kinds of linear urban centers around stations. The identified four intermediate cities attract industries and logistic centers. Those industries, logistic centers, and new railway stations often established at the periphery of intermediate cities resulted labour influx from rural and nearby small urban centers and urban expansion that caused a rural-urban continuum of ribbon settlement and strengthen trade gate way for the landlocked Ethiopia that caused trans-regional integration.

This study introduces an innovative approach to assessing seismic risks and urban vulnerabilities in Nador, a coastal city in northeastern Morocco at the convergence of the African and Eurasian tectonic plates. By integrating advanced spatial datasets, including Landsat 8–9 OLI imagery, Digital Elevation Models (DEM), and seismic intensity metrics, the research develops a robust urban vulnerability index model. This model incorporates urban land cover dynamics, topography, and seismic activity to identify high-risk zones. The application of Landsat 8–9 OLI data enables precise monitoring of urban expansion and environmental changes, while DEM analysis reveals critical topographical factors, such as slope instability, contributing to landslide susceptibility. Seismic intensity metrics further enhance the model by quantifying earthquake risk based on historical event frequency and magnitude. The calculation based on higher density in urban areas, allowing for a more accurate representation of seismic vulnerability in densely populated areas. The modeling of seismic intensity reveals that the most susceptible impact area is located in the southern part of Nador, where approximately 50% of the urban surface covering 1780.5 hectares is at significant risk of earthquake disaster due to vulnerable geological formations, such as unconsolidated sediments. While the findings provide valuable insights into urban vulnerabilities, some uncertainties remain, particularly due to the reliance on historical seismic data and the resolution of spatial datasets, which may limit the precision of risk estimations in less densely populated areas. Additionally, future urban expansion and environmental changes could alter vulnerability patterns, underscoring the need for continuous monitoring and model refinement. Nonetheless, this research offers actionable recommendations for local policymakers to enhance urban planning, enforce earthquake-resistant building codes, and establish early warning systems. The methodology also contributes to the global discourse on urban resilience in seismically active regions, offering a transferable framework for assessing vulnerability in other coastal cities with similar tectonic risks.