This paper presents a coupling of the Monte Carlo method with computational fluid dynamics (CFD) to analyze the flow channel design of an irradiated target through numerical simulations. A novel series flow channel configuration is proposed, which effectively facilitates the removal of heat generated by high-power irradiation from the target without necessitating an increase in the cooling water flow rate. The research assesses the performance of both parallel and serial cooling channels within the target, revealing that, when subjected to equivalent cooling water flow rates, the maximum temperature observed in the target employing the serial channel configuration is lower. This reduction in temperature is ascribed to the accelerated flow of cooling water within the serial channel, which subsequently elevates both the Reynolds number and the Nusselt number, leading to enhanced heat transfer efficiency. Furthermore, the maximum temperature is observed to occur further downstream, thereby circumventing areas of peak heat generation. This phenomenon arises because the cooling water traverses the target plates with the highest internal heat generation at a lower temperature when the flow channels are arranged in series, optimizing the cooling effect on these targets. However, it is crucial to note that the pressure loss associated with the serial structure is two orders of magnitude greater than that of the parallel structure, necessitating increased pump power and imposing stricter requirements on the target container and cooling water pipeline. These findings can serve as a reference for the design of the cooling channels in the target station system, particularly in light of the anticipated increase in beam power during the second phase of the China Spallation Neutron Source (CSNS Ⅱ).

Yunnan is rich in cultural heritage, with its primitive pottery techniques coexisting with modern pottery techniques, and is known as the “Museum of Ceramic History”. Due to regional and socio-economic development factors, some folk pottery and craftsmen have faded out of sight or only circulated in a few small areas and specific environments. The study analyzes and summarizes the characteristics of Yunnan folk pottery and industry and evaluates the Yunnan folk pottery value based on the conditional valuation method. The study takes the folk pottery of the Bai nationality in Dali, Yunnan as an example and obtains the evaluation results of the purchasing motivation value of the pottery through a questionnaire survey. 45.26% of people pay for their existence value, 26.03% pay for their choice value, and 28.71% pay for their legacy value. Based on the evaluation results, the study proposes targeted activation paths for Yunnan folk pottery, including innovative development combined with new technologies, highlighting the functional characteristics of pottery, and brand building. This study will help Yunnan folk pottery find more suitable ways of protection and inheritance in the rapid development of materials and technology. This study can help inheritors gain the possibility of sustainable development and provide reference value for the activation path of other traditional folk.

We report a method for effectively and homogeneously incorporating carbon nanotubes (CNTs) in the form of double-wall (DWCNTs) and multi-wall (MWCNTs) structures into commercial paints without the use of additives, surfactants, or chemical processes. The process involves the physical mixing of the nanotubes and polymers using the cavitation energy of an ultrasonic bath. It is a simple, fast method that allows for uniform distribution of carbon nanotube bundles within the polymer for direct application. Due to the hydrophobic properties of the carbon nanotubes as grown, we used paint samples containing 0.3% by mass of both types of CNTs and observed an improvement in waterproofing through wettability and water absorption through immersion tests on the samples. Different solvents such as water, formaldehyde, and glycerin were used, and the results showed an increase in paint impermeability of 30% and 25% with the introduction of DWCNTs and MWCNTs, respectively. This indicates a promising, economically viable, and revolutionary method for applying nanotechnology in the polymer industry.

This study aims to investigate the effectiveness of community involvement in waste management through participatory research. Its objective is to bridge the theoretical underpinnings of participatory research with its practical implementation, particularly within the realm of waste management. The review systematically analyzes global instances where community engagement has been incorporated into waste management initiatives. Its principal aim is to evaluate the efficacy of participatory strategies by scrutinizing methodologies and assessing outcomes. To achieve this, the study identified 74 studies that met rigorous criteria through meticulous search efforts, encompassing various geographical locations, cultural contexts, and waste management challenges. In examining the outcomes of participatory research in waste management, the study explores successful practices, shortcomings, and potential opportunities. Moving beyond theoretical discourse, it provides a detailed analysis of real-world applications across various settings. The evaluation not only highlights successful engagement strategies and indicators but also critically assesses challenges and opportunities. By conducting a comprehensive review of existing research, this study establishes a foundation for future studies, policy development, and the implementation of sustainable waste management practices through community engagement. The overarching goal is to derive meaningful insights that contribute to a more inclusive, effective, and globally sustainable approach to waste management. This study seeks to inform policymaking and guide future research initiatives, emphasizing the importance of community involvement in addressing the complexities of waste management on a global scale.

The erudite priest Marciano Di Leo (1751–1819), a prominent personality in the historical and geographical panorama of his time, not only in his home territory, authored a vast literary and poetic production but also tried his hand at producing some maps, referring to a province of the Kingdom of Naples. At a time when the principles of geodetic cartography had become increasingly known, even locally, hand in hand with improvements in technology and accuracy of measurements, the author reflected on the historical narratives of the progress of the European (and Neapolitan) Enlightenment and translated them into an unpublished manuscript of statistical, historical, and geographical nature, accompanied by numerous maps of various scales. The rediscovery of a largely unknown—and therefore not very thorough—minor cartographic production underscores the spread, even in more marginal contexts, of the most innovative ideas and increasingly precise scientific foundations in the cartographic-mathematical representation of the territory. It also illustrates the role of a number of intellectuals in the service of the political choices of their time, in an attempt—often unrealized—to bring about a decisive change of course in public administration, in accordance with Enlightenment ideals and in the spirit of reform that spread throughout Europe thanks to the French Revolution.