In this paper, the characteristic behavior of the disc consisting of thermoplastic composite CF/PA6 material was considered. Analysis was made by taking into account the usage areas of the materials and referring to certain temperatures between 30 ℃ and 150 ℃. Composite materials are lightweight; they show high strength. For these reasons, they are preferred in technology, especially in the aircraft and aerospace industry. With this study, the radial and tangential stresses determined within a certain temperature The temperatures were determined and compared with previous studies in the literature. According to the results obtained, it is believed that the thermoplastic composite CF/PA6 disc design can be used in engineering.

Nanomaterials are a recently discovered type of material that is gaining importance and receiving a lot of attention from researchers. Due to their numerous advantages, scholars are studying nanoparticles extensively. The articles in this issue that discuss the various applications of nanoparticles are very interesting. The majority of these articles focus on the use of nanoparticles in the medical sector and their contributions to environmental protection.

Phytochemical and antioxidant analysis of some varieties of Capsicum was evaluated. Mature Capsicum varieties were collected across the State. The seeds were removed, sun-dried for 3 days, stored for 2 weeks at 15 ºC–25 ºC in polythene bags before planting. Saponins, tannins, flavonoids, alkaloids and cardiac glycosides were present in abundant, moderate and trace amounts. Combined anthraquinones were absent in all varieties. Yellow (0.810 ± 0.0006 µg/mL), red long dry (0.211 ± 0.0006 µg/mL) and round peppers (2.527 ± 0.0003 µg/mL) had the largest values for total phenol, flavonoids and tannins. Shombo and yellow peppers had the largest (0.270 ± 0.002 µg/mL) and least (0.102 ± 0.001 µg/mL) capsaicin content. The antioxidant activities varied across the varieties. At 100 µg/mL of methanol, yellow (45%) and round peppers (45%) had largest mean absorbances for 2,2-Diphenyl-1-Picrylhydrazyl (DPPH) Radical Scavenging Activity while sub-shombo pepper (23%) had the least. For Ferric Reducing Antioxidant Power (FRAP), yellow (0.63 ± 0.001 µg/mL) and sub-shombo peppers (0.55 ± 0.001µg/mL) had the largest and least values at 100 µg/mL of methanol. At 100 µg/mL of methanol, red long dry (0.112 ± 0.001) and shombo peppers (0.101 ± 0.001) had the largest and least values for the nitric oxide scavenging activity. This study shows that Capsicum varieties exhibit bioactive componds similarities and variations with implications in hybridization, taxonomy and conservation.

Carbon based materials are really an integral component of our lives and widespread research regarding their properties was conducted along this process. The addition of dopants to carbon materials, either during the production process or later on, has been actively investigated by researchers all over the world who are looking into how doping can enhance the performance of materials and how to overcome the current difficulties. This study explores synthesis methods for nitrogen-doped carbon materials, focusing on advancements in adsorption of different pollutants like CO₂ from air and organic, inorganic and ions pollutants from water, energy conversion, and storage, offering novel solutions to environmental and energy challenges. It addresses current issues with nitrogen-doped carbon materials, aiming to contribute to sustainable solutions in environmental and energy sciences. Alongside precursor types and synthesis methods, a significant relationship exists between nitrogen content percentage and adsorption capacity in nitrogen-doped activated carbon. Nitrogen content ranges from 0.64% to 11.23%, correlating with adsorption capacities from 0.05 mmol/g to 7.9 mmol/g. Moreover, an electrochemical correlation is observed between nitrogen atom increase and specific capacity in nitrogen-doped activated carbon electrodes. Higher nitrogen percentage corresponds to increased specific capacity and capacity retention. This comprehensive analysis sheds light on the potential of nitrogen-doped carbon materials and highlights their significance in addressing critical environmental and energy challenges.

Vehicle detection stands out as a rapidly developing technology today and is further strengthened by deep learning algorithms. This technology is critical in traffic management, automated driving systems, security, urban planning, environmental impacts, transportation, and emergency response applications. Vehicle detection, which is used in many application areas such as monitoring traffic flow, assessing density, increasing security, and vehicle detection in automatic driving systems, makes an effective contribution to a wide range of areas, from urban planning to security measures. Moreover, the integration of this technology represents an important step for the development of smart cities and sustainable urban life. Deep learning models, especially algorithms such as You Only Look Once version 5 (YOLOv5) and You Only Look Once version 8 (YOLOv8), show effective vehicle detection results with satellite image data. According to the comparisons, the precision and recall values of the YOLOv5 model are 1.63% and 2.49% higher, respectively, than the YOLOv8 model. The reason for this difference is that the YOLOv8 model makes more sensitive vehicle detection than the YOLOv5. In the comparison based on the F1 score, the F1 score of YOLOv5 was measured as 0.958, while the F1 score of YOLOv8 was measured as 0.938. Ignoring sensitivity amounts, the increase in F1 score of YOLOv8 compared to YOLOv5 was found to be 0.06%.