The present study demonstrates the fabrication of heterogeneous ternary composite photocatalysts consisting of TiO₂, kaolinite, and cement (TKCe),which is essential to overcome the practical barriers that are inherent to currently available photocatalysts. TKCe is prepared via a cost-effective method, which involves mechanical compression and thermal activation as major fabrication steps. The clay-cement ratio primarily determines TKCe mechanical strength and photocatalytic efficiency, where TKCe with the optimum clay-cement ratio, which is 1:1, results in a uniform matrix with fewer surface defects. The composites that have a clay-cement ratio below or above the optimum ratio account for comparatively low mechanical strength and photocatalytic activity due to inhomogeneous surfaces with more defects, including particle agglomeration and cracks. The TKCe mechanical strength comes mainly from clay-TiO₂ interactions and TiO₂-cement interactions. TiO₂-cement interactions result in CaTiO₃ formation, which significantly increases matrix interactions; however, the maximum composite performance is observed at the optimum titanate level; anything above or below this level deteriorates composite performance. Over 90% degradation rates are characteristic of all TKCe, which follow pseudo-first-order kinetics in methylene blue decontamination. The highest rate constant is observed with TKCe 1-1, which is 1.57 h⁻¹ and is the highest among all the binary composite photocatalysts that were fabricated previously. The TKCe 1-1 accounts for the highest mechanical strength, which is 6.97 MPa, while the lowest is observed with TKCe 3-1, indicating that the clay-cement ratio has a direct relation to composite strength. TKCe is a potential photocatalyst that can be obtained in variable sizes and shapes, complying with real industrial wastewater treatment requirements.

Communicative language is an important part of daily communication, and mastering its usage proficiently can leave a good impression on people. There are significant differences in the greetings between China and Japan. These  differences also reflect the different cultures of the two countries. Focusing on the greetings of the first meeting in daily life, this paper selects TV plays with more daily exchanges, collects language materials of TV play types related to social life, friendship, schools, companies, etc., and makes a comparative analysis of the performance and functions of Japanese and Chinese greetings, and makes a study of Sociolinguistics.

Plum (Prunus domestica) is a seasonal nutraceutical fruit rich in many functional food nutrients such as vitamin C, antioxidants, total phenolic content, and minerals. Recently, researchers have focused on improvised technologies for the retention of bioactive compounds during the processing of perishable fruits; plum is one of these fruits. This study looked at how the percentage of moisture content and percentage of acidity were affected by conventional drying and osmotic dehydration. Total phenolic content (mg GA/100 g of plum), total anthocyanin content (mg/100 g), and vitamin C (mg/100 g) Conventional drying of fruit was carried out at 80.0 ℃ for 5 h. At various temperatures (45.0 ℃, 50.0 ℃, and 55.0 ℃) and hypertonic solution concentrations (65.0 B, 70.0 B, and 75.0 B), the whole fruit was osmotically dehydrated. It was observed that the osmotically treated fruit retains more nutrients than conventionally dried fruit. The total phenolic content of fruit significantly increased with the increase in process temperature. However, vitamin C and total anthocyanin content of the fruit decreased significantly with process temperature, and hypertonic solution concentration was observed. Hence, it was concluded that osmodehydration could be employed for nutrient retention in plum fruit over conventional drying. This process needs to be further refined, improvised, and optimised for plum processing.

During the early spring in the woodlands of eastern North America, Phlox drummondii emerges as a perennial plant adorned with a profusion of blooms in shades of blue, purple, pink, or white. Its evergreen nature adds to its charm. To manage the growth of plants or specific plant parts, plant growth regulators (PGRs) are synthesized and employed, serving as valuable tools for controlling and directing the development of various plant species. A diverse range of ornamental plants, such as Phlox drummondii, have been documented to receive exogenous applications of plant growth regulators (PGRs). Among these regulators, gibberellins (GA) play a vital role by delaying senescence in flowers and promoting the breaking of dormancy in seeds, bulbs, and corms of ornamental plants. The experiment aimed to assess the performance and determine the optimal growth medium for Phlox. Five distinct growth media were employed as treatments during the study, which took place in the Horticulture Department of Gomal University. Collected data underwent analysis through ANOVA and Tuckey HSD tests. The study’s findings revealed that the highest plant height (16 cm) was observed in the control treatment with PGR 1, closely followed by PGR 2 (11.5 cm). The treatment labeled as T5, composed of a mixture of 1/3 sand, 1/3 poultry manure, and 1/3 soil, demonstrated the most favorable results across multiple parameters such as bud initiation (BI), first flower emergence (FFE), flowers per plant (FPP), branches per plant (BPP), leaves per plant (LPP), number of roots (NR), field life of flowers (FLF), and flower diameter (FD). T4, T3, T2, and T1 treatments also exhibited similar positive outcomes, aligning with the promising performance of T5.

To gain a deep understanding of maintenance and repair planning, investigate the weak points of the distribution network, and discover unusual events, it is necessary to trace the shutdowns that occurred in the network. Many incidents happened due to the failure of thermal equipment in schools. On the other hand, the most important task of electricity distribution companies is to provide reliable and stable electricity, which minimal blackouts and standard voltage should accompany. This research uses seasonal time series and artificial neural network approaches to provide models to predict the failure rate of one of the equipment used in two areas covered by the greater Tehran electricity distribution company. These data were extracted weekly from April 2019 to March 2021 from the ENOX incident registration software. For this purpose, after pre-processing the data, the appropriate final model was presented with the help of Minitab and MATLAB software. Also, average air temperature, rainfall, and wind speed were selected as input variables for the neural network. The mean square error has been used to evaluate the proposed models’ error rate. The results show that the time series models performed better than the multi-layer perceptron neural network in predicting the failure rate of the target equipment and can be used to predict future periods.

Aiming at the problem of incompatibility of biomass models of forest organs, taking Chinese fir in Fujian Jiangle State-owned Forest Farm as the research object, based on selecting the optimal independent model of each organ, the biomass compatibility model of Chinese fir was established with a three-level joint control scheme. The results show that the compatibility equation system based on the whole plant biomass can effectively solve the problem of incompatibility in the whole plant biomass, each sub-biomass and between sub-biomass. Besides, except for the leaf biomass model, all other biomass models have good fitting effect, which is of great significance to the guidance of the analysis of local Chinese fir biomass.