The effective drainage radius of coal seam is an important basis for the spacing of pre-drainage gas boreholes. To quickly and accurately determine the effective drainage radius, a new method was proposed. For the coal face where the desorbable gas content before mining has met the standard, the compliance of mine gas drainage rate was used as the basis to determine the effective drainage radius. The fluid-structure interaction model was constructed, numerical simulation of coal seam gas drainage was carried out by using COMSOL software, and the model was validated by combining the field test results. The results show that the new method has the advantage of short cycle. With the extension of drainage time, the increase of effective drainage radius gradually decreases, and finally reaches a relatively stable limit value, which conforms to the Langmuir function. The average error between numerical simulation and field test values of effective drainage radius is 4.9%, which proves that the model is reliable. This model can accurately predict the effective drainage radius under different coal seam gas contents and drainage times. The research results provide a new mean for determining the effective drainage radius of coal seam and the layout of gas drainage boreholes.

In this study, we consider the extended Brinkman's-Darcy model for a triple diffusive convection system which consists of some parameters such as Taylor number (Ta), Solutal Rayleigh numbers (RC1 , RC2 ), and Prandtl number (Pr). To investigate the range of these parameters, a dynamical system of the Ginzburg-Landau equation is developed. The parametric analysis and comparative study of the model for the three Rayleigh numbers which leads to the clear fluid layer, sparsely packed porous layer, and densely packed porous layer is done with the help of bifurcation maps and the Lyapunov exponents. It is found that for a certain range of parameters, the system exhibits a chaotic behaviour.

This research investigates the effects of drying on some selected vegetables, which are Telfaria occidentalis, Amaranthu scruentus, Talinum triangulare, and Crussocephalum biafrae. These vegetables were collected fresh, sliced into smaller sizes of 0.5 cm, and dried in a convective dryer at varying temperatures of 60.0 °C, 70.0 °C and 80.0 °C respectively, for a regulated fan speed of 1.50 ms‒1, 3.00 ms‒1 and 6.00 ms‒1, and for a drying period of 6 hours. It was discovered that the drying rate for fresh samples was 4.560 gmin‒1 for Talinum triangulare, 4.390 gmin‒1for Amaranthu scruentus, 4.580 gmin‒1 for Talinum triangulare, and 4.640 gmin‒1 for Crussocephalum biafrae at different controlled fan speeds and regulated temperatures when the mass of the vegetable samples at each drying time was compared to the mass of the final samples dried for 6 hours. The samples are considered completely dried when the drying time reaches a certain point, as indicated by the drying rate and moisture contents tending to zero. According to drying kinetics, the rate of moisture loss was extremely high during the first two hours of drying and then steadily decreased during the remaining drying duration. The rate at which moisture was removed from the vegetable samples after the drying process at varying regulated temperatures was noted to be in this trend: 80.0 °C > 70.0 °C > 60.0 °C and 6.0 ms‒1 > 3.0 ms‒1 > 1.5 ms‒1 for regulated fan speed. It can be stated here that the moisture contents has significant effects on the drying rate of the samples of vegetables investigated because the drying rate decreases as the regulated temperatures increase and the moisture contents decrease. The present investigation is useful in the agricultural engineering and food engineering industries.

A comprehensive proteomic analysis was carried out to evaluate leaf proteome changes of Brassica napus cultivars as an important oilseed crop inoculated with the bacterium Pseudomonas fluorescens FY32 under salt stress. Based on the physiochemical characteristics of canola, Hyola308 was a tolerant and Sarigol was a salt sensitive cultivar. Gel-based proteomics indicated that proteins related to energy/metabolism, cell/membrane maintenance, signalins, stress, and development respond to salt stress and bacterial inoculation in both cultivars. Under salt stress, Hyola308 launches mechanisms similar to Sarigol, but the tolerance was related to consuming less energy consumption than Sarigol for launching the proper pathway/mechanism. Inoculation with plant growth promoting bacteria promotes relative growth rate and net assimilation rate; causes increase in soluble sugar content (12–32% varing to cultivars and salt treatments), as an osmo-protectant, in leaves of Sarigol and Hyola308 in control and salt stress conditions. The groups of proteins that are affected due to inoculation (18 and14 functional groups in Hyola308 and Sarigol, respectively) are varying to stress-influenced groups (10 and 6 functional groups in Hyola308 and Sarigol, respectively) that might be because of regulating tolerance mechanism of plant and/or plant-growth promoting bacteria inoculation. Furthermore, it is recognized that P. fluorescens FY32 has a dual effect on the cultivars including a pathogenic effect and a growth promoting effect on both cultivars under salt stress.

Polyurethane is a multipurpose polymer with valuable mechanical, thermal, and chemical stability, and countless other physical features. Polyurethanes can be processed as foam, elastomer, or fibers. This innovative overview is designed to uncover the present state and opportunities in the field of polyurethanes and their nanocomposite sponges. Special emphasis has been given to fundamentals of polyurethanes and foam materials, related nanocomposite categories, and associated properties and applications. According to literature so far, adding carbon nanoparticles such as graphene and carbon nanotube influenced cell structure, overall microstructure, electrical/thermal conductivity, mechanical/heat stability, of the resulting polyurethane nanocomposite foams. Such progressions enabled high tech applications in the fields such as electromagnetic interference shielding, shape memory, and biomedical materials, underscoring the need of integrating these macromolecular sponges on industrial level environmentally friendly designs. Future research must be intended to resolve key challenges related to manufacturing and applicability of polyurethane nanocomposite foams. In particular, material design optimization, invention of low price processing methods, appropriate choice of nanofiller type/contents, understanding and control of interfacial and structure-property interplay must be determined.

  Polyurethane is a multipurpose polymer with valuable mechanical, thermal, and chemical stability, and countless other physical features. Polyurethanes can be processed as foam, elastomer, or fibers. This innovative overview is designed to uncover the present state and opportunities in the field of polyurethanes and their nanocomposite sponges. Special emphasis has been given to fundamentals of polyurethanes and foam materials, related nanocomposite categories, and associated properties and applications. According to literature so far, adding carbon nanoparticles such as graphene and carbon nanotube influenced cell structure, overall microstructure, electrical/thermal conductivity, mechanical/heat stability, of the resulting polyurethane nanocomposite foams. Such progressions enabled high tech applications in the fields such as electromagnetic interference shielding, shape memory, and biomedical materials, underscoring the need of integrating these macromolecular sponges on industrial level environmentally friendly designs. Future research must be intended to resolve key challenges related to manufacturing and applicability of polyurethane nanocomposite foams. In particular, material design optimization, invention of low price processing methods, appropriate choice of nanofiller type/contents, understanding and control of interfacial and structure-property interplay must be determined.