An experiment was conducted to assess the effect of psychoenergetic energy in litchi as positive and negative thoughts using a simple meditation technique at ICAR-NRC on Litchi, Muzaffarpur. The plant produced 24.75 g of fruit given positive energy, while the plant with negative thought energy produced 22.12 g of fruit. The fruit and seed weight increased by 11.88% and 13.63%, respectively, due to positive energy. The number of fruit retentions increased by 23.77% due to positive energy. Anthocyanin content in pericarp was increased by 5.45% in plants given positive energy. Fruit qualities were also significantly affected by psychoenergy. TSS (Brix) was significantly increased by 13.54% in plants given positive energy as compared to negative energy, and titratable acidity was reduced by 25% due to positive energy. Ascorbic acid was also increased by 30% in plant given positive thoughts. Sun burn was reduced by 54.76% and fruit cracking by 63.64% due to energy of thought. Fruit borer infestation was reduced by 70%, and mite infestation was reduced by 90% in plants given positive energy. The psychoenergetic potential is vast, and its ability to improve crop yield and quality cannot be overstated. The hidden power of thought is being practiced by all, but mostly people do not know this power and use it in an improper manner. This is a high time when we need to practice generating powerful thoughts to change present-day agriculture and its dependents.

This paper proposes to apply a microfluidic chip combining DSC, DTA, and PCR-like functions for studying synthesis and selection of precursors of the genetic code carriers at hydrothermal conditions including those in natural high frequency fields (such as magnetosphere emission, atmospherics, auroras and lightings).

Heat transfer augmentation procedures, such as Heat Transfer Enhancement and Intensification, are commonly used in heat exchanger systems to enhance thermal performance by decreasing thermal resistance and increasing convective heat transfer rates. Swirl-flow devices, such as coiled tubes, twisted-tape inserts, and other geometric alterations, are commonly used to create secondary flow and improve the efficiency of heat transfer. This study aimed to explore the performance of a heat exchanger by comparing its performance with and without the use of twisted-tape inserts. The setup consisted of a copper inner tube measuring 13 mm in inner diameter and 15 mm in outer diameter, together with an outer pipe measuring 23 mm in inner diameter and 25 mm in outer diameter. Mild steel twisted tapes with dimensions of 2 mm thickness, 1.2 cm width, and twist ratios of 4.3 and 7.2 were utilised. The findings indicated that the heat transfer coefficient was 192.99 W/m² °C when twisted-tape inserts were used, while it was 276.40 W/m² °C without any inserts. The experimental results closely aligned with the theoretical assumptions, demonstrating a substantial enhancement in heat transfer performance by the utilisation of twisted-tape inserts. The study provides evidence that the utilisation of twisted-tape inserts resulted in a nearly two times increase in the heat transfer coefficient, hence demonstrating their efficacy in augmenting heat transfer.

The increased awareness of the environmental effects of petroleum based plastics has stimulated the coffee price emergence of biodegradable polymers such as polylactic acid (PLA). In a bid to increase the sustainability of PLA agricultural residues of animal feeds (corn stover, rice straw, and soybean hulls) have been explored and examined as reinforcing fillers to PLA composites. The consideration of such applications is suitable to the goals of the circular economy as it recycles low-value agricultural products. The current review critically evaluates lately carried out life cycle assessment (LCA) studies on PLA composites that have implemented such waste fillers with the full focus being on their environmental performance as well as methodological consistency. The review shows that these fillers have a potential of reducing the amount of greenhouse emission, energy usage, and other environmental effects, compared to pure PLA. However, unevenness in LCA methodology, especially in functional units, the system boundaries, and impacts categories obstructs direct LCA comparisons. The 1997 State of the Market report also has limited options of feedstocks and the lack of appraisals in the socio-economic front, so the overall sustainability analysis is restricted. Some of the remaining limitations that can be critical are to have generalized LCA frameworks, extended exploration of waste-based fillers, as well as combination of techno-economic analysis and social impact. Future inquiries ought to devise design considerations that would optimize both the functional characteristics and the performance of the environment and improve the reliability of sustainability measures. This review is evidence to the potential of agricultural waste reinforced PLA composites in the progress towards environmentally friendly materials and the need of integrative evaluation in the sustainable maturation of bioplastics.

Polyurethane is a multipurpose polymer with valuable mechanical, thermal, and chemical stability, and countless other physical features. Polyurethanes can be processed as foam, elastomer, or fibers. This innovative overview is designed to uncover the present state and opportunities in the field of polyurethanes and their nanocomposite sponges. Special emphasis has been given to fundamentals of polyurethanes and foam materials, related nanocomposite categories, and associated properties and applications. According to literature so far, adding carbon nanoparticles such as graphene and carbon nanotube influenced cell structure, overall microstructure, electrical/thermal conductivity, mechanical/heat stability, of the resulting polyurethane nanocomposite foams. Such progressions enabled high tech applications in the fields such as electromagnetic interference shielding, shape memory, and biomedical materials, underscoring the need of integrating these macromolecular sponges on industrial level environmentally friendly designs. Future research must be intended to resolve key challenges related to manufacturing and applicability of polyurethane nanocomposite foams. In particular, material design optimization, invention of low price processing methods, appropriate choice of nanofiller type/contents, understanding and control of interfacial and structure-property interplay must be determined.