Bioactive materials are those that cause a number of interactions at the biomaterial-living tissue inter-face that result in the evolution of a mechanically strong association between them. For this reason, an implantable material’s bioactive behavior is highly advantageous. Silicate glasses are encouraged to be used as bioactive glasses due to their great biocompatibility and beneficial biological effects. The sol-gel method is the most effective for preparing silicate glasses because it increases the material’s bioactivity by creating pores. Glass densities are altered by the internal network connectivity between network formers and network modifiers. The increase in the composition of alkali or alkaline oxides reduces the number of bridging oxygens and increases the number of non-bridging oxygens by retaining the overall charge neutrality between the alkali or alkaline cation and oxygen anion. Higher drying temperatures increase pore densities, while the melt-quenching approach encourages the creation of higher density glasses. Band assignments for the BAG structure can be explained in detail using Fourier Transform Infrared (FTIR) and Raman spectroscopic investigations. Raman spectroscopy makes it simple to measure the concentration of the non-bridging oxygens in the silica matrix.

The detection of urban expansion through digital processing of satellite images provides valuable information for understanding the dynamics of land use change and its spatial relationship with environmental factors. In order to apply or generate effective land-use planning policies, it is essential to have a historical record of the regional distribution of human settlements, an element that is practically non-existent in our country. For this reason, this text aims to determine the urban growth rate during the period 2000–2014 in the state of Hidalgo, Mexico, and to identify potential expansion zones from Landsat images. Six Landsat scenes were used for the spatial analysis of the state urban coverage and their relationship with the road influence area was evaluated. Two maps were obtained as cartographic products: one of urban coverage distribution and another of the municipalities with the greatest expansion, whose areas are located in the Valle del Mezquital region. However, Mineral de la Reforma, Tetepango, Tizayuca and Pachuca de Soto stand out for their growth rates during the study period: 183.44%, 102%, 94% and 68.5%, respectively. In total, the state urban area in-creased 72.3 km² from 2000 to 2014 with an average growth rate of 1.8% per year. Such growth was associated with the areas of influence of important road infrastructure, such as the Libramiento Arco Norte in Hidalgo. Therefore, the Mezquital Valley and the Mexico Basin are considered as potential regions for urban expansion in the state.

The direct expansion heat pump with solar energy is an energy conversion system used for water heating applications, air heating for air conditioning buildings, water desalination, solar drying, among others. This paper reviews the main designs and analysis of experiments in order to identify the fundamental objectives of any experiment which may be: to determine the factors that have a significant influence, to obtain a mathematical model and/or to optimize performance. To achieve this task, the basic and advanced configuration of this system is described in detail in order to characterize its thermal performance by means of energy analysis and/or exergy-based analysis. This review identifies possible lines of research in the area of design and analysis of experiments to develop this water heating technology for industrial applications.

Physical sampling of water on site is necessary for various applications like drinking water quality checking in lakes and checking for contaminants in freshwater systems. The use of water surface vehicles is a promising technology for monitoring and sampling water bodies, and they offer several advantages over traditional monitoring methods. This project involved designing and integrating a drone controller, water collection sampling contraption unit, and a surveillance camera system into a water surface vehicle (WSV). The drone controller unit is used to operate the boat from the starting location until the location of interest and then back to the starting location. The drone controller has an autopilot system where the operator can set a course and be able to travel following the path set, whereas the WSV will fight the external forces to keep itself in the right position. The water collection sampling unit is mounted onto WSV so when it travels to the location, it can start collecting and holding water samples until it returns to the start location. The field of view (FOV) surveillance camera helps the operator to observe the surrounding location during the operation. Experiments were conducted to determine the operational capabilities of the robot boat at the Ayer Keroh Lake. The water collection sampling contraption unit collected samples from 44 targeted areas of the lake. The comprehensive examination of 14 different water quality parameters were tested from the collected water samples provides insights into the factors influencing the pollution and observation of water bodies. The successful design and development of a water surface surveillance and pollution tracking vehicle marks the key achievements of this study. The developed collection and surveillance unit holds the potential for further refinement and integration onto various other platforms. They are offering valuable assistance in water body management, coastal surveillance, and pollution tracking. This system opens up new possibilities for comprehensive water body assessments, contributing to the advancement of sustainable and efficient water testing. Through careful sampling efforts, a thorough overview of the substances presents in the water collected from Ayer Keroh Lake has been compiled. This in-depth analysis provides important insights into the lake’s current condition, offering valuable information about its ecological health.

The study looks at Ghana’s mining industry’s audit culture and green mining practices about their social responsibility to the communities where their mines are located. Results: According to this study, the economic motivations of mines and green mining are inversely related. Even large mining companies incur significant costs associated with their green mining initiatives because they require a different budget each year, which has an impact on their ability to maximize wealth. Conversely, mines with strong green mining initiatives enjoy positive public perception, and vice versa. Ghanaian mines do not have pre- or during-mining strategies; instead, they only have post-social and post-environmental methods. The best method for evaluating mines’ environmental performance in the community in which they operate is, according to this study, social auditing. This is primarily influenced by the mine’s audit culture, but it is also influenced by the auditor’s compliance with audit processes, audit guidelines, and, ultimately, the audit firm’s experience. The analysis confirms that Ghana’s mine environmental performance is appallingly low since local audit firms are not used in favor of foreign auditors who lack experience or empathy for the problems encountered by these mining communities. Last but not least, corporate social responsibility (CSR) is connected to Ghana’s development of green mining, either directly or indirectly. Whether the mine adopts a technocrat, absolutist, or relativist perspective on mining will determine this. The study discovered that, in contrast to the later approach, the first two views generate work in a mechanistic manner with little to no consideration for CSR.

In this regard the key factor determining the success of the mining industry is the cost of electricity. By understanding the risks associated with crypto mining industry. The method is based on systemic literature review and bibliometric analysis exploring keyword “bitcoin mining”. This review paper studies 50 papers for the period of 2019–2023. The results propose recommendations for crypto miners. Currently, the results confirm that bitcoin mainly depends on the consumption of inexpensive electricity. Consequently, the bitcoin network predominantly uses energy in regions where it is abundant and cannot be stored or exported. Most miners rely on electricity generated from hydroelectric power plants, geysers and geothermal sources, which are not easy to transport or store. Bitcoin will continue to look for such cost-effective and underutilized energy sources, as mining in urban areas or industrial centers will remain financially unviable. If the price of bitcoin stabilizes and a sufficient number of miners enter the market, it is quite possible that in the near future we may witness a fivefold increase in their energy consumption.