Europium (Eu) doped Calcium borophosphate (CBP) phosphors were synthesized via the solid-state diffusion method. The prepared Europium (Eu) doped Calcium borophosphate (CBP) powder was heated up to 600 ℃ for 6 h for a complete diffusion of ions in the powder system. XRD results showed that the prepared phosphors exhibit a well-crystallized hexagonal phase. The complete diffusion inside the CBP/Eu powder system has been confirmed by the presence of elements such as P, O, Bi, Ca, C, Eu, and B. Apart from that, the synthesized powder system has shown a down-conversion property where the Eu³⁺-activated ion was excited at 251 nm. Under the excitation of 251 nm, CBP/Eu phosphor showed intense emissions peaking at 591,617, and 693 nm due to the ⁵D₀ → ⁷F₁, ⁵D₀ → ⁷F₂, and ⁵D₀ → ⁷F₄ transition of Eu³⁺ ions. The obtained results suggest that the CBP/Eu phosphors have the potential for spectral response coating materials to improve photovoltaic (PV) panel efficiency.

Projects implemented under life cycle contracts have become increasingly common in recent years to ensure the quality of construction and maintenance of energy infrastructure facilities. A key parameter for energy facility construction projects implemented under life cycle contracts is their duration and deadlines. Therefore, the systematic identification, monitoring, and comprehensive assessment of risks affecting the timing of work on the design and construction is an urgent practical task. The purpose of this work is to study the strength of the influence of various risks on the duration of a project implemented on the terms of a life cycle contract. The use of the expert assessment method allows for identifying the most likely risks for the design and construction phases, as well as determining the ranges of deviations from the baseline indicator. Using the obtained expert evaluations, a model reflecting the range and the most probable duration of the design and construction works under the influence of risk events was built by the Monte-Carlo statistical method. The results obtained allow monitoring and promptly detecting deviations in the actual duration of work from the basic deadlines set in the life cycle contract. This will give an opportunity to accurately respond to emerging risks and build a mutually beneficial relationship between the parties to life cycle contracts.

Nanoparticle drug delivery systems are engineered technologies that use nanoparticles for the targeted delivery and controlled release of therapeutic agents. Cisplatin-loaded nanoparticle formulations were optimized utilizing response surface methods and the central composite rotating design model. This study employed a central composite rotatable design with a three-factored factorial design with three tiers. Three independent variables namely drug polymer ratio, aqueous organic phase ration, and stabilizer concentration were used to examine the particle size, entrapment efficiency, and drug loading of cisplatin PLGA nanoparticles as responses. The results revealed that this response surface approach might be able to be used to find the best formulation for the cisplatin PLGA nanoparticles. A polymer ratio of 1:8.27, organic phase ratio of 1:6, and stabilizer concentration of 0.15 were found to be optimum for cisplatin PLGA nanoparticles. Nanoparticles made under the optimal conditions found yielded a 112 nm particle size and a 95.4 percent entrapment efficiency, as well as a drug loading of 9 percent. The cisplatin PLGA nanoparticles tailored for scanning electon microscopy displayed a spherical form. A series of in vitro tests showed that the nanoparticle delivered cisplatin progressively over time. According to this work, the Response Surface Methodology (RSM) employing the central composite rotatable design may be successfully used to simulate cisplatin-PLGA nanoparticles.

The maize commodity is of strategic significance to the South African economy as it is a stable commodity and therefore a key factor for food security. In recent times climate change has impacted on the productivity of this commodity and this has impacted trade negatively. This paper explores the intricate relationship between climatic factors and trade performance for the South African maize. Secondary annual time series data spanning 2001 to 2023, was sourced from an abstract from Department of Agriculture, Land Reform and Rural Development (DALRRD) and World Bank’s Climate Change Knowledge Portal. Autoregressive Distributed Lag (ARDL) cointegration technique was used as an empirical model to assess the long-term and short-term relationships between explanatory variables and the dependent variable. Results of the ARDL model show that, average annual rainfall (β = 2.184, p = 0.056), fertilizer consumption (β = 1.919, p = 0.036), gross value of production (β = 1.279 , p = 0.006) and average annual surface temperature (β = −0.650, p = 0.991) and change in temperature for previous years, (β = −0.650, p = 0.991) and the effects towards coefficient change for export volumes, (β = 0.669, p = 0.0007). In overall, as a recommendation, South African policymakers should consider these findings when developing strategies to mitigate the impacts of some of these climatic factors and implementing adaptive strategies for maize producers.

Catfish (Pangasianodon hypothalamus) are known in Asia, specifically in Southeast Asia. Currently, this fish has been exported to almost all countries in the world. This research aimed to examine the existing conditions of the solid waste produced, analyze the chemical composition of the waste, and look for alternatives for the policy and economical use of waste in the catfish processing business. Using the survey method, data were gathered through measurement at the research location and laboratory, interviews with business owners, and field observations. Proximate analysis was conducted on pink slime meat, belly fat, bones, and fish innards. Analysis of acid number, saponification number, iodine number, and fat fatty acid was carried out on stomach fat. Meanwhile, amino acid analysis was carried out for pink slime meat. Handling catfish industrial waste has yet to be carried out properly, which causes a foul smell and disturbs the environment. The catfish industry waste’s chemical content (protein, fat, water content, carbohydrates, and fatty acids) (pink slime meat, belly fat, fish bones, and innards) is still relatively applicable. The study processed fish waste into products like instant porridge, analogous fish sago rice, and fish sago noodles. The proximate analysis results of these products show figures that exceed the minimum standards for similar products.