Introduction: Many detrimental effects on employees’ health and wellbeing might result from inadequate illumination in the workplace. Headaches and trouble focusing can result from eye strain brought on by inadequate illumination. The purpose of this study was to simulate and optimize workplace illumination in the ceramic industry. Materials and methods: A common Luxmeter ST-1300 was used to measure the illumination in seven workplaces at a height of 100 cm above the floor. DIALux evo version 7.1 software was used to simulate the illumination of workplaces. To optimize the illumination conditions, a numerical experiment design consisting of 16 scenarios was used for each of the workplaces. Four factors were considered for each scenario: luminaire height, number of luminaires, luminous flux, and light loss factor. The Design-Expert program version 13.0.5.0 was applied for developing the scenarios. Finally, by developing quadratic models for each workplace, the optimization process was implemented. Results: Every workplace had illumination levels that were measured to be between 250 and 300 lux. Instead of using compact fluorescent luminaires, LED technology was recommended to maximize the illumination conditions for the workers. Following optimization, 376 lux of illumination were visible at each workstation in every workspace. For the majority of the workspaces, the simulated illumination was expected to have a desirability degree greater than 0.9. The uniformity and illumination of the workplace were significantly impacted by the two factors of luminaire height and luminaire count. Conclusion: The primary outcomes of this optimization were the environmental, political, and socioeconomic ones, including reduced consumption power, high light flux, and environmental compatibility. Nonetheless, the optimization technique applied in this work can be applied to the design of similar situations, such as residential infrastructure.

This study aims to scrutinize specific long-term sustainability industrial indicators in Thailand as a representative of an emerging economy. The study uses a Bloomberg database comprising all Thai listed companies on the Stock Exchange of Thailand from 2013 to 2023. The research employs a two-step Generalized Method of Moments (GMM) statistics to assess the enduring impact on industrial sustainability. These results provide consistent, significant and positive relationships between asset turnover and sales with all industrial sustainability. The results additionally reveal that some other factors may moderate industrial sustainability but reveal the GDP growth rate and institutional shareholders are less likely to be corporate sustainability to all indicators. The results provide insight into valuable guidance to management teams, financial statements’ users, investors and other stakeholders on designing effective operations and investment strategies to improve sustainability.

This study unveils the mediating mechanism and explores the role of organizational trust in the link between organizational justice and turnover intention among female employees in the banking industry. For this purpose, we gathered data from 336 female workers employed at a Tunisian prominent bank, encompassing both head office and branch locations dispersed throughout the country. Our study analyzed the data using AMOS statistical software version 25 and confirmed our research hypotheses. Our findings showed that procedural justice and interactional justice positively influence organizational trust, while they both have a negative impact on turnover intention among female employees. Furthermore, organizational trust significantly and negatively influences female employees’ turnover intention. Ultimately, we have demonstrated that organizational trust completely mediates the link between procedural and interactional justice and female employees’ turnover intention. This highlights the significance of organizational trust in conditioning the relationships linking procedural and interactional justice to turnover intention among female employees. Hence, top management should put more emphasis on building organisational trust among their female employees to ensure positive attitude and behaviour. Other implications for practitioners and researchers are elaborated.

Industrial zones require careful and meticulous planning because industry can have a major impact on the surrounding environment. The research location is the northern part of West Java Province which is a gold triangle area named Rebana Triangle Area. The purpose of this study is to measure the weight of the research variables in determining industrial zones from the results of fuzzy analytical hierarchy process (F-AHP) analysis, assessing the location of industrial zones in the research area based on important variables in determining industrial zones. The result of this study is the weight of the research variables in determining the industrial zone from the results of the fuzzy analytical hierarchy process (F-AHP) analysis obtained is the availability of electrical infrastructure with an influence weight of 15.00%. The second most influential factor is the availability of telecommunications infrastructure with an effect of 13.02%, the distance of land to roads and access of 11.76%, land use of 11.21%, distance of land to public facilities of 9.99%, labour cost work is 9.60%, the distance of land to the river is 8.19%, the price of land is 7.97%, the slope is 6.79%, and the type of soil is 6.43%. This GIS analysis model can be a reference model for the government in determining the potential of industrial zones in other regions in Indonesia. A total of 4822.41 Ha or the equivalent of 3.50% of the total area of 6 (six) regencies/cities research areas which are very suitable to be used as industrial zones. The district that has the largest area of potential industrial zone is Majalengka, while Cirebon does not have a location that has the potential for industrial zone locations. Based on the results of the analysis of 10 (ten) variables for determining industrial zones from expert opinion, a draft policy proposal for the government can be proposed, among others. These 10 (ten) variables are variables that are expected to be mandatory variables in planning and determining the location of potential industrial areas.

Currently, there is a unique situation in the global economy, industrial eras coexist together, there is interaction and transformation of financial systems simultaneously within the framework of Industry 4.0 and Industry 5.0. New, digital resources are entering the economy, intellectual capital is becoming virtual, artificial intelligence is increasingly finding its application in the structure of financial support. Financial intermediation in developing countries is also subject to global trends, the active development of new instruments for developing economies is especially important. The aim of the study is to identify effective ways to develop financial intermediation in Industry 5.0 for the economies of developing countries. Based on the results of the study on the development of financial institutions mediation revealed a problem related to the lack of reasonable tools that could be used to improving the efficiency of the financial intermediaries market, proposed the main directions of such a process: mobilization of savings, distribution financial assets, payment system, risk management and control over market agents involved in financial operations.

Noise pollution in construction sites is a significant concern, impacting worker health, safety, communication, and productivity. The current study aims to assess the paramount consequences of ambient noise pollution on construction activities and workers’ productivity in Peshawar, Pakistan. Noise measurements have been recorded at four different construction sites in Peshawar at different times of the day. Statistical analysis and Relative Importance Index (RII) are employed to evaluate the data Risk variables, such as equipment maintenance, noise control, increased workload, material handling challenges, quality control issues, and client satisfaction. The results indicated that noise levels often exceeded permissible limits, particularly in the afternoon, posing significant worker risks. In addition, RII analysis identified communication difficulties, safety hazards, and decreased productivity as significant issues. The results show that noise pollution is directly linked with safety risks, decreased performance, and client dissatisfaction and needs immediate attention by authorities. This paper proposes a strategic policy framework, recommending uniform hand signals and visual communication methods without noise for workers, worker training about safety, and using wearable devices in noisy settings. Communication training for teams and crane operators, proactive quality control, and customer-oriented project schedules are also proposed. These recommendations aim to mitigate the adverse effects of noise pollution, enhance construction industry resilience, and improve overall operational efficiency, worker safety, and client satisfaction in the construction sector of Peshawar, aligning with policy and sustainable development objectives.