In this study, the enrichment of the major oxide, trace element/heavy metal and rare earth element contents of the rocks outcropping in Kısacık and its vicinity (Ayvacık-Çanakkale/Türkiye) were investigated. The rocks in the field were handled in 5 groups, and whole rock analyses were carried out for 22 samples collected representing these rock groups and Element Enrichment Factor (EEF) of the major oxide, trace element/heavy metal and rare earth element contents of the rocks were calculated. As a result, it was determined that the Kısacık volcanics were enriched in SiO₂, Fe₂O₃, K₂O, Be, Co, Cs, Th, U, W, La, Eu, Tm, Yb, Lu, Mo, As, Cd, Sb, Bi and Hg elements at a rate of >1 to >150 according to the upper crust values, and the Fe₂O₃, MgO, CaO, TiO₂, P₂O₅, MnO, Cr, Sc, Co, Nb, Sr, Mo, Cu, Ni, Cad, Sb, Bi, V, Cu and Cd concentrations of the Ophiolitic Mélange were enriched in ratios ranging from >1 to >36 according to the upper crust values. It has been also observed that the listvenitic rocks in the Ophiolitic Mélange are enriched in Cr, Co, Ni, As and Hg elements compared to the upper crust. As to Kazdağ Group, MgO, CaO, K₂O, MnO, Cr, Co, Ta, U, W, Mo, Cu, Ni, As and Cd were enriched. Listvenite were enriched in SiO₂, Fe₂O₃, MgO, Mn, Cr, Co, Ni, As, Sb and Hg at a rate of >1 to >32 according to the upper crust values. When the rocks in the area were evaluated together, some oxides (e.g., CaO, MgO, Fe₂O₃, TiO₂) and elements (e.g., Cr, Ni, Co) were enriched due to parental rock, while some oxides (e.g., SiO₂, K₂O and MnO) and elements (As, Sb, Hg) were enriched due to epigenic processes such as hydrothermal alteration and weathering.

Nothofagus pumilio forests constitute the most economically important forest stand in southern Argentina and Chile. Total volume stocking and volumetric yield vary according to site quality, degree of occupation, growth stage and forest history of the stand. The objective of this work was to evaluate the stocking and the productive potential in quantity and quality of products for the sawmilling industry, using three harvesting systems (short logs, long logs and complete shafts) in the protection cut of a N. pumilio forest of site quality III in Tierra del Fuego (Argentina). The trials were conducted in an irregular mature forest with two strata and abundant regeneration (3.0 ha; RDI 93.8–113.4%). Total volumes varied between 726.5 and 850.3 m³∙ha^-1, with a volume/basal area ratio of 11.8 to 12.1 m³∙m^-2. The harvesting rates obtained were: 45.5% for complete logs, 21.3% for long logs and 22.4% for short logs. A model was used to estimate the timber volume for each system, where full shafts resulted in a significant increase in timber volume. Considering new alternatives in the planning of harvesting in forest management for N. pumilio forests, such as the system of complete shafts, allows obtaining higher harvesting rates, increasing the benefits for the forestry company and minimizing the damage to the forest, due to the shorter distance of the machinery in the forest harvesting.

Adsorption is a widely used method for the treatment of dissolved contaminants. Various agro-industrial wastes have been explored as potential adsorbents, showing high efficiency in dye removal. Each adsorbate-adsorbent pair needs kinetic, and equilibrium models to scale up this process. In this work, the equilibrium, kinetics and thermodynamics of the corn Tuza-Red 40 system were evaluated under batch system at ph = 2.0 at temperatures of 25, 40, and 55 °C. The Langmuir, Freundlich and Temkin models were selected for the isotherm representation, while the Lagergren, Ho, and Elovich equations for the kinetics of the process. The Freundlich model presented the best fit to the isotherms, the adsorption kinetics was best described by the Ho equation, and the values for Gibbs free energy and entropy indicated the spontaneity and feasibility of the process.

Municipal authorities in industrialized and in developing countries face unceasingly the issues of congestion, insufficiency of transport means capacity, poor operability of transport systems and a growing demand for reliable and effective urban transport. While the expansion of infrastructure is generally considered as an undesirable option, in specific cases, when short links or ring roads are missing, new infrastructure projects may provide beneficial solutions. The upgrading and renewal of existing networks is always a challenge to the development of a modern city and the welfare of citizens. Central governance and management of transport systems, the establishment of smart and digital infrastructure, advanced surveillance and traffic monitoring, and intra-city energy-harvesting policy are some of the steps to be taken during the transition to a green and sustainable urban future.
Municipal authorities have also to consider other options and strategies to create a citizen-friendly setting for mobility: diminish the need for trips (digitalization of services, e-commerce, etc.), shift from private to public transport and transform the urban form to promote non-motorized transport in favor of the natural environment and public health. A citizen-friendly policy based on the anticipation of future needs and technological development seems to be a requisite for European cities searching for a smooth integration of their networks into urban space.

A large number of consumers in Malaysia are resistant towards new technology and prefer instead the tried and tested way of doing things. It is worth examining if local consumers are in fact ready to digitize and accept technology in their day-to-day dealings. A behavioral study was developed to gauge the digital maturity and tech preparedness of Malaysian consumers with regards to loyalty and how this will reflect an individual’s predisposition in his or her ability and eventual use of a new technology. This study latched on to the concept of tech preparedness. A conceptual framework was developed after reviewing existing scholarly literature. This was then tested through a survey using a convenience sample from 383 SME consumers in the country. This study also looked at the difference in tech preparedness among gender, age and level of education. During the Investigation regarding Industry 4.0, it was noticed that there are few studies dealing with this segment of companies in Malaysia. In addition in team of this research about customer perspective the amount of studies become more less and also because of the Shortage of the necessary skills, talents and knowledge for adopting Industry 4.0, the number Malaysian company ready to move or already move to industry 4.0 is quit few and it seems to cause less experience using new technology among Malaysian customers.

This paper presents a coupling of the Monte Carlo method with computational fluid dynamics (CFD) to analyze the flow channel design of an irradiated target through numerical simulations. A novel series flow channel configuration is proposed, which effectively facilitates the removal of heat generated by high-power irradiation from the target without necessitating an increase in the cooling water flow rate. The research assesses the performance of both parallel and serial cooling channels within the target, revealing that, when subjected to equivalent cooling water flow rates, the maximum temperature observed in the target employing the serial channel configuration is lower. This reduction in temperature is ascribed to the accelerated flow of cooling water within the serial channel, which subsequently elevates both the Reynolds number and the Nusselt number, leading to enhanced heat transfer efficiency. Furthermore, the maximum temperature is observed to occur further downstream, thereby circumventing areas of peak heat generation. This phenomenon arises because the cooling water traverses the target plates with the highest internal heat generation at a lower temperature when the flow channels are arranged in series, optimizing the cooling effect on these targets. However, it is crucial to note that the pressure loss associated with the serial structure is two orders of magnitude greater than that of the parallel structure, necessitating increased pump power and imposing stricter requirements on the target container and cooling water pipeline. These findings can serve as a reference for the design of the cooling channels in the target station system, particularly in light of the anticipated increase in beam power during the second phase of the China Spallation Neutron Source (CSNS Ⅱ).