Our environment has been significantly impacted by man-made pollutants, primarily due to industries making substantial use of synthetic chemicals, resulting in significant environmental consequences. In this research investigation, the co-precipitation approach was employed for the synthesis of cellulose-based ferric oxide (Fe₂O₃/cellulose) and copper oxide nanoparticles (CuO_x-NPs). Scanning electron microscopy (SEM) analyses were conducted to determine the properties of the newly synthesised nanoparticles. Furthermore, the synthesized nanoparticles were employed for eliminating chromium from aqueous media under various conditions, including temperature, contact time, adsorbent concentration, adsorbate concentration, and pH. Additionally, the synthesised materials were used to recover Cr(VI) ions from real samples, including tap water, seawater, and industrial water, and the adsorptive capacity of both materials was evaluated under optimal conditions. The synthesis of Fe₂O₃/cellulose and CuO_x-NPs proved to be effective, as indicated by the outcomes of the study. 

Cellulose nanocrystal, known as CNCs, is a form of material that can be produced by synthesizing carbon from naturally occurring substances, such as plants. Due to the unique properties it possesses, including a large surface area, impressive mechanical strength, and the ability to biodegrade, it draws significant attention from researchers nowadays. Several methods are available to prepare CNC, such as acid hydrolysis, enzymatic hydrolysis, and mechanical procedures. The characteristics of CNC include X-ray diffraction, transmission electron microscopy, dynamic light scattering, etc. In this article, the recent development of CNC preparation and its characterizations are thoroughly discussed. Significant breakthroughs are listed accordingly. Furthermore, a variety of CNC applications, such as paper and packaging, biological applications, energy storage, etc., are illustrated. This study demonstrates the insights gained from using CNC as a potential environmentally friendly material with remarkable properties.

Among major global threats to papaya cultivation, papaya ringspot virus (PRSV) is the most challenging one. In the absence of any PRSV resistant commercial papaya cultivar, PRSV management is restricted to minimizing yield losses. ICAR-Indian Agricultural Research Institute, Regional Station, Pune has developed PRSV tolerant dioecious papaya lines, Pune Selection (PS)-1, PS-2, PS-3 and PS-5. Being dioecious these lines have limited acceptability among farmers. Gynodioecious population from these lines were developed and characterized. They are numbered PS-1-1, PS-2-1, PS-3-1 and PS-5-1. These lines were characterized against prevailing commercial gynodioecious cultivar, Red Lady, for five generations. The average plant height of PS-2-1 and PS-5-1 (183 cm) was more than Red Lady (158 cm), however, stem girth of all lines was lesser than Red Lady. The fruiting height of all lines was less than Red Lady (87 cm). Length of the fruiting column of all lines was more than Red Lady (37 cm), except in PS-1-1. Fruit yield of all lines was more than Red Lady (16 kg/plant). Intensity of PRSV infection in Red Lady (48%) was considerably more than all lines. These lines can be used for developing PRSV tolerant gynodioecious papaya variety.

Nanomaterials are a recently discovered type of material that is gaining importance and receiving a lot of attention from researchers. Due to their numerous advantages, scholars are studying nanoparticles extensively. The articles in this issue that discuss the various applications of nanoparticles are very interesting. The majority of these articles focus on the use of nanoparticles in the medical sector and their contributions to environmental protection.

In the present work, a series of butyl methacrylate/1-hexene copolymers were synthesized, and their efficiency as viscosity index improvers, pour point depressants, and shear stabilizers of lube oil was investigated. The effect of 1-hexene molar ratio, type, and concentration of Lewis acids on the incorporation of 1-hexene into the copolymer backbone was investigated. The successful synthesis of the copolymers was confirmed through FTIR and 1H NMR spectroscopy. Results obtained from quantitative 1H NMR and GPC revealed that an increase in the molar ratio of 1-hexene to butyl methacrylate, along with concentration of Lewis acids led to an increase in 1-hexene incorporation and a reduction in Mn and Ð. Similar trends were observed when the Lewis acid changed from AlCl₃ to organometallic acids. The maximum 1-hexene incorporation (26.4%) was achieved for sample BHY3, with a [1-hexene/BMA] ratio of 4 mol% and a [Yb(OTf)₃/BMA] ratio of 2.5 mol%. Evaluation of the synthesized copolymers as lube oil additives demonstrated that the viscosity index was more significantly influenced by samples with higher molecular weight. Sample BHA13 represents maximum VI of 137. The copolymer containing Yb(OTf)₃ as a catalyst exhibited superior efficiency as a pour point depressant. Furthermore, sample BHY3 showed the lowest shear stability index (6.4).