The combination of polybutylene terephthalate (PBT) and polyamide 6 (PA6) plastic mixture was taken from waste from the table production process along with carbon black (CB) reinforcement with the desire to create a potential plastic mixture widely used in many fields. The PBT/PA6/CB mix is created by injection molding with a CB weight ratio of 0%, 4%, 8%, and 12%. This study has shown the change in plastic’s mechanical properties when adding CB to the mixture by testing the unnotched impact toughness according to ASTM D256 standards. Research results show that the unnotched impact toughness was gradually reduced when increasing the CB content in the mixture from 0% to 12% CB. Specifically, at 0% CB, the resulting unnotched impact toughness was 12.85 kJ/m², reduced to 4.78 kJ/m².

Implementing green retrofitting can save 50–90% of energy use in buildings built worldwide. Government policies in several developed countries have begun to increase the implementation of green retrofitting buildings in those countries, which must rise by up to 2.5% of the lifespan of buildings by 2030. By 2050, it is hoped that more than 85% of all buildings will have been retrofitted. The high costs of implementing green retrofitting amounting to 20% of the total initial construction costs, as well as the uncertainty of costs due to cost overruns are one of the main problems in achieving the implementation target in 2050. Therefore, increasing the accuracy of the costs of implementing green retrofitting is the best solution to overcome this. This research is limited to analyzing the factors that influence increasing the accuracy of green retrofitting costs based on WBS, BIM, and Information Systems. The results show that there are 10 factors affecting the cost accuracy of retrofitting or customizing high-rise office buildings, namely Energy Use Efficiency, Water Use Efficiency, Use of Environmentally Friendly Materials, Maintenance of Green Building Performance during the Use Period, Initial Survey, Project Information Documents, Cost Estimation Process, Resources, Legal, and Quantity Extraction applied. These factors are shown to increase the accuracy of green retrofitting costs.

In the teaching of graphic design, students' learning state and learning effect are poor due to the lack of attractiveness of teaching materials. In order to fully display the graphic design knowledge contained in totem patterns, a model based on the pattern elements of totem patterns was constructed. Through Marvelous Designer software, the display of totem visual effects under different pattern element configurations was realized, providing a basis for the comparative explanation of graphic design teaching. When designing the teaching content, based on the totem art culture, it has constructed three parts of teaching methods of plane composition, teaching contents of plane composition and teaching concepts of plane composition, which correspond to the material selection, composition and freehand brushwork skills of totem patterns in modeling creativity and expression techniques, and the range of material selection, composition form and connotation of plane design teaching, the specific application is realized through knowledge transfer.