This study introduces a novel Groundwater Flooding Risk Assessment (GFRA) model to evaluate risks associated with groundwater flooding (GF), a globally significant hazard often overshadowed by surface water flooding. GFRA utilizes a conditional probability function considering critical factors, including topography, ground slope, and land use-recharge to generate a risk assessment map. Additionally, the study evaluates the return period of GF events (GFRP) by fitting annual maxima of groundwater levels to probability distribution functions (PDFs). Approximately 57% of the pilot area falls within high and critical GF risk categories, encompassing residential and recreational areas. Urban sectors in the north and east, containing private buildings, public centers, and industrial structures, exhibit high risk, while developing areas and agricultural lands show low to moderate risk. This serves as an early warning for urban development policies. The Generalized Extreme Value (GEV) distribution effectively captures groundwater level fluctuations. According to the GFRP model, about 21% of the area, predominantly in the city's northeast, has over 50% probability of GF exceedance (1 to 2-year return period). Urban outskirts show higher return values (> 10 years). The model's predictions align with recorded flood events (90% correspondence). This approach offers valuable insights into GF threats for vulnerable locations and aids proactive planning and management to enhance urban resilience and sustainability.

On the basis of the enlightenment of international engineering education accreditation for the reform and development of higher education in China, combined with the important measures of the national “double first-class” construction, new challenges have been proposed for innovative talent cultivation among engineering majors in the context of promoting national development. These challenges also promote the reform of science-oriented courses among engineering majors. As a core mandatory course for engineering majors, biochemistry plays a crucial role in the entire educational process at universities, serving as a bridge between basic and specialized courses. To address challenges such as limited course resources, insufficient development of students’ advanced thinking and innovation skills, and overly standardized assessment methods, the bioengineering major from Guilin University of Technology restructured the biochemistry course content. A blended teaching model termed “three integrations, three stages, one sharing”, was implemented. This effort has yielded significant results, providing a research foundation for constructing an innovative talent cultivation system that is oriented toward industry needs within modern industrial colleges. It also offers valuable insights into and reference points for the cultivation of engineering talents and curriculum reform in local universities.

Introduction, purpose of the study: In Central Europe, in Hungary, the state guarantees access to health care and basic health services partly through the Semmelweis Plan adopted in 2011. The Health Plan aims to optimize and transform the health system. The objectives of hospital integration, as set out in the Plan, started with the state ownership of municipal hospitals in 2012, continued with the launch of integration processes in 2012–2013 and culminated today. The transformation of a health system can have an impact on health services and thus on meeting the needs of the population. We aim to study the effectiveness of integration through access to CT diagnostic testing. Our hypothesis is that integration has resulted in increased access to modern diagnostic services. The specialty under study is computed tomography (CT) diagnostic care. Our research shows that the number of people receiving CT diagnostic care has increased significantly because of integration, which has also brought a number of positive benefits, such as reduced health inequalities, reduced travel time, costs and waiting lists. Test material and method: Our quantitative retrospective research was carried out in the hospital of Kalocsa through document analysis. The research material was comparing two time periods in the Kalocsa site of Bács-Kiskun County, Southern Hungary. The number of patients attending CT examinations by area of duty of care according to postal codes was collected: Pre-integration period 2014.01.01–2017.11.30. (Kalocsa did not have CT equipment, so patients who appeared in Kecskemét Hospital but were under the care of Kalocsa), post-integration period 2017.12.01–2019.12.31. (period after the installation of CT in Kalocsa). The target group of the study consisted of women and men together, aged 0–99 years, who appeared for a CT diagnostic examination. The study sample size was 6721 persons. Linear regression statistics were used to evaluate the results. Based on empirical experience, a SWOT analysis was carried out to further investigate the effectiveness of integration. Results: As a result of the integration, the CT scan machine purchased in the Kalocsa District Hospital has enabled an average of 129.7 patients per month to receive CT scans on site without travelling. The model used is significant, explaining 86% of the change in the number of patients served (F = 43.535; p < 0.001, adjusted R² = 0.860). The variable of integration in the model is significant, with an average increase in the number of patients served of 129.7 per month (t = 22.686; p < 0.001) following the introduction of CT due to integration. None of the month variables representing seasonal effects were found to be significant, with no seasonal effect on care. The SWOT analysis has clearly identified the strengths, weaknesses, opportunities and threats related to the integration, the main outcome of which is the acquisition of a CT diagnostic tool. Conclusions: Although we only looked at one segment of the evidence for the effectiveness of hospital integration, integration in the study area has had a positive impact on CT availability, reducing disparities in care.

As a public opinion position to convey the spirit of the Party Central Committee and national policies, the Integrated Media Center plays a vital role in publicity work. However, there are also some problems in the process that hinder further development. The integrated media center has the advantages of understanding the direction of publicity, familiar with the local economic and cultural development, and mastering the production of short videos. If the integrated media assists in the production and promotion of short videos, it will have better publicity effects. This article analyzes the problems in the promotion process of short videos for rural users, in order to establish effective working ideas for the media center and promote local cultural inheritance and innovation.

In our study, we examined 11 designated tourist destinations in Hungary, which can also be interpreted as tourism products including services, infrastructure and attractions. The National Tourism Development Strategy (NTS) also puts a strong emphasis on digitalisation, as it is an unstoppable process with a significant impact on tourism, thanks to globalisation, increasing competition, accelerating information flows and the dominant paradigm shifts on the demand and supply side. We used both qualitative and quantitative methods in our primary research. First, we conducted in-depth interviews with several important tourism service providers in Hungary on the topic of the digitalisation of tourism. A professional questionnaire, addressed to the offices responsible for destination management was distributed in the designated tourist destinations in Hungary in order to get a more comprehensive picture of the attitudes towards digitalisation in the regions under study. In the course of our work, we managed to classify the destinations into three distinctly different clusters. Our hypothesis—that the higher the digitalisation of a tourist destination is, the higher the average length of stay—was partially confirmed by calculating the regional value of the digitalisation, logistic regression analysis, slope and the individual factor categories.

Implementing green retrofitting can save 50–90% of energy use in buildings built worldwide. Government policies in several developed countries have begun to increase the implementation of green retrofitting buildings in those countries, which must rise by up to 2.5% of the lifespan of buildings by 2030. By 2050, it is hoped that more than 85% of all buildings will have been retrofitted. The high costs of implementing green retrofitting amounting to 20% of the total initial construction costs, as well as the uncertainty of costs due to cost overruns are one of the main problems in achieving the implementation target in 2050. Therefore, increasing the accuracy of the costs of implementing green retrofitting is the best solution to overcome this. This research is limited to analyzing the factors that influence increasing the accuracy of green retrofitting costs based on WBS, BIM, and Information Systems. The results show that there are 10 factors affecting the cost accuracy of retrofitting or customizing high-rise office buildings, namely Energy Use Efficiency, Water Use Efficiency, Use of Environmentally Friendly Materials, Maintenance of Green Building Performance during the Use Period, Initial Survey, Project Information Documents, Cost Estimation Process, Resources, Legal, and Quantity Extraction applied. These factors are shown to increase the accuracy of green retrofitting costs.