The electro-magnetic (EM) waves transmitted through a thin object with fine structures are observed by a microsphere located above the thin object. The EM radiation transmitted through the object produces both evanescent waves, which include information on the fine structures of the object (smaller than a wavelength), and propagating waves, which include the large image of the object (with dimensions larger than a wavelength). The super-resolutions are calculated by using the Helmholtz equation. According to this equation, evanescent waves have an imaginary component of the wavevector in the z direction, leading the components of the wavevector in the transversal directions to become very large so that the fine structures of the object can be observed. Due to the decay of the evanescent waves, only a small region near the contact point between the thin object and the microsphere is effective for producing the super resolution effects. The image with super-resolution can be increased by a movement of the microsphere over the object or by using arrays of microspheres. Both propagating and evanescent waves arrive at the inner surface of the microsphere. A coupling between the transmitted EM waves and resonances produced in the dielectric sphere, possibly obtained by the Mie method, leads to a product of the EM distribution function with the transfer function. While this transfer function might be calculated by the Mie method, it is also possible to use it as an experimental function. By Fourier transform of the above product, we get convolution between the EM spatial modes and those of the transfer function arriving at the nano-jet, which leads the evanescent waves to become propagating waves with effective very small wavelengths and thus increase the resolution.

2050 building stock might be buildings that already exist today. A large percentage of these buildings fail today’s energy performance standards. Highly inefficient buildings delay progress toward a zero-carbon-building goal (SDGs 7 and 13) and can lead to investments in renewable energy infrastructure. The study aims to investigate how bioclimatic design strategies enhance energy efficiency in selected orthopaedic hospitals in Nigeria. The study objective includes Identifying the bioclimatic design strategies that improve energy efficiency in orthopaedic hospitals, assessing the energy efficiency requirements in an orthopaedic hospital in Nigeria and analysing the effects of bioclimatic design strategies in enhancing energy efficiency in an orthopaedic hospital in Nigeria. The study engaged a mixed (qualitative and quantitative) research method. The investigators used case study research as a research design and a deductive approach as the research paradigm. The research employed a questionnaire survey for quantitative data while the in-depth Interview (IDI) guide and observation schedule for qualitative data. The findings present a relationship between bioclimatic design strategies and energy conservation practices in an orthopaedic hospital building. Therefore, implementing bioclimatic design strategies might enhance energy efficiency in hospital buildings. The result of the study revealed that bioclimatic hospital designs may cost the same amount to build but can save a great deal on energy costs. Despite the challenges, healthcare designers and owners are finding new ways to integrate bioclimatic design strategies into new healthcare construction to accelerate patient and planet healing.

Liquid Metal Battery (LMB) technology is a new research area born from a different economic and political climate that has the ability to address the deficiencies of a society where electrical energy storage alternatives are lacking. The United States government has begun to fund scholarly research work at its top industrial and national laboratories. This was to develop Liquid Metal Battery cells for energy storage solutions. This research was encouraged during the Cold War battle for scientific superiority. Intensive research then drifted towards high-energy rechargeable batteries, which work better for automobiles and other applications. Intensive research has been carried out on the development of electrochemical rechargeable all-liquid energy storage batteries. The recent request for green energy transfer and storage for various applications, ranging from small-scale to large-scale power storage, has increased energy storage advancements and explorations. The criteria of high energy density, low cost, and extensive energy storage provision have been met through lithium-ion batteries, sodium-ion batteries, and Liquid Metal Battery development. The objective of this research is to establish that Liquid Metal Battery technology could provide research concepts that give projections of the probable electrode metals that could be harnessed for LMB development. Thus, at the end of this research, it was discovered that the parameter estimation of the Li//Cd-Sb combination is most viable for LMB production when compared with Li//Cd-Bi, Li-Bi, and Li-Cd constituents. This unique constituent of the LMB parameter estimation would yield a better outcome for LMB development.

This review comprehensively summarizes various preparatory methods of polymeric bone scaffolds using conventional and modern advanced methods. Compilations of the various fabrication techniques, specific composition, and the corresponding properties obtained under clearly identified conditions are presented in the commercial formulations of bone scaffolds in current orthopedic use. The gaps and unresolved questions in the existing database, efforts that should be made to address these issues, and research directions are also covered. Polymers are unique synthetic materials primarily used for bone and scaffold applications. Bone scaffolds based on acrylic polymers have been widely used in orthopedic surgery for years. Polymethyl methacrylate (PMMA) is especially known for its widespread applications in bone repair and dental fields. In addition, the PMMA polymers are suitable for carrying antibiotics and for their sustainable release at the site of infection.

The aim of this paper is to introduce a research project dedicated to identifying gaps in green skills by using the labor market intelligence. Labor Market Intelligence (LMI). The method is primarily descriptive and conceptual, as the authors of this paper intend to develop a theoretical background and justify the planned research using Natural Language Processing (NLP) techniques. This research highlights the role of LMI as a tool for analysis of the green skills gaps and related imbalances. Due to the growing demand for eco-friendly solutions, there arises a need for the identification of green skills. As societies shift towards eco-friendly economic models, changes lead to emerging skill gaps. This study provides an alternative approach for identification of these gaps based on analysis of online job vacancies and online profiles of job seekers. These gaps are contextualized within roles that businesses find difficult to fill due to a lack of requisite green skills. The idea of skill intelligence is to blend various sources of information in order to overcome the information gap related to the identification of supply side factors, demand side factors and their interactions. The outcomes emphasize the urgency of policy interventions, especially in anticipating roles emerging from the green transition, necessitating educational reforms. As the green movement redefines the economy, proactive strategies to bridge green skill gaps are essential. This research offers a blueprint for policymakers and educators to bolster the workforce in readiness for a sustainable future. This article proposes a solution to the quantitative and qualitative mismatches in the green labor market.

E-commerce plays an important role in many organizations and businesses, including small and medium-sized enterprises (SMEs). Although the body of scientific knowledge carries significant research in addressing the main drivers and challenges of e-commerce among SMEs, the Saudi market was untouched, especially after the official Saudi government classification of SMEs back in December of 2016. Therefore, this study aims to explore the most common factors and challenges of SMEs when utilizing e-commerce in Saudi Arabia. It focused on Jeddah City as the second-largest city and the main seaport of the country. This research is based on a quantitative survey carried out among 63 firms, due to the difficulty in reaching a larger number of participants who had dedicated time and budget. The examined factors were collected from the literature and classified using the Technology, Organization, and Environment Model (TOE). Out of 63 firms, only six were adopting e-commerce. This led us to focus more on the challenges that hindered the remaining 57 from utilizing e-commerce. The analysis results uncovered the status of e-commerce among a sample of Saudi SMEs and showed that the knowledge and awareness level of e-commerce potential for businesses play a significant factor in reaching this incredibly low number.