The CO₂  heat pump air conditioning system of new energy vehicle is designed, and the vehicle model of CO₂  heat pump module and heat management system is established based on KULI simulation. The effects of refrigerant charge, running time and compressor speed on the heat pump air conditioning system is studied, and the energy consumption is compared with the PTC heating system and the CO₂ heat pump air conditioning system without waste heat recovery. The results show that the optimal charge for full-service operation is 750 g; increasing the compressor speed can increase the cooling capacity, so that the refrigerant temperature in the passenger compartment and battery inlet can quickly reach the appropriate temperature, but the COP_h, COP_c are reduced by 2.5% and 1.8% respectively. By comparing it with PTC heating and CO₂ heat pump air conditioning systems without waste heat recovery, it is found that the energy consumption of this system is only for the PTC heating systems 42.5%, without waste heat recovery carbon dioxide heat pump air conditioning system of 86.6%. It greatly saves energy, but also increased the waste heat recovery function, so that the system supply air temperature increased by 26%, improve passenger cabin comfort. This  provides a reference for the future experimental research of CO₂ heat pump air conditioning and heat management system. 

Inequity in infrastructure distribution and social injustice’s effects on Ethiopia’s efforts to build a democratic society are examined in this essay. By ensuring fair access to infrastructure, justice, and economic opportunity, those who strive for social justice aim to redistribute resources in order to increase the well-being of individuals, communities, and the nine regional states. The effects that social inequity and injustice of access to infrastructure have on Ethiopia’s efforts to develop a democratic society were the focus of the study. Time series analysis using principal component analysis (PCA) and composite infrastructure index (CII), as well as structural equation modeling–partial least squares (SEM-PLS), were necessary to investigate this issue scientifically. This study also used in-depth interviews and focus group discussions to support the quantitative approach. The research study finds that public infrastructure investments have failed or have been disrupted, negatively impacting state- and nation-building processes of Ethiopia. The findings of this research also offer theories of coordination, equity, and infrastructure equity that would enable equitable infrastructure access as a just and significant component of nation-building processes using democratic federalism. Furthermore, this contributes to both knowledge and methodology. As a result, indigenous state capability is required to assure infrastructure equity and social justice, as well as to implement the state-nation nested set of policies that should almost always be a precondition for effective state- and nation-building processes across Ethiopia’s regional states.

In this study, the influence of sewage sludge ash (SSA) waste particle contents on the mechanical properties and interlaminar fracture toughness for mode I and mode II delamination of S-glass fiber-reinforced epoxy composites was investigated. Composite laminate specimens for tensile, flexural double-cantilever beam (DCB), and end-notched fracture (ENF) tests were prepared and tested according to ASTM standards with 5, 10, 15, and 20 wt% SSA-filled S-glass/epoxy composites. Property improvement reasons were explained based on optical and scanning electron microscopy. The highest improvement in tensile and flexural strength was obtained with a 10 wt% content of SSA. The highest mode I and mode II interlaminar fracture toughness’s were obtained with 15 wt% content of SSA. The mode I and mode II interlaminar fracture toughness improved by 33% and 63.6%, respectively, compared to the composite without SSA.

We analyzed the relationship between nutrient (N and K) parceling and population density on the severity of onion downy mildew under no-tillage fertigation cultivation in the conditions of Alto Vale do Itajaí (Barzil). For this purpose, field trials were conducted in the years 2017, 2018 and 2019, in Ituporanga (Barzil). The treatments corresponded to four population densities (300, 400, 500 and 600 mil plants ha^-1) subjected to applications of nitrogen (150 kg N ha^-1) and potassium (127.5 kg K₂O ha^-1) distributed throughout the vegetative cycle of the crop via fertigation on a weekly, biweekly and monthly basis, based on the absorption curve of these nutrients for the cultivar Empasc 352-Bola Precoce. In fertigated no-tillage systems, nutrient (N and K) tranches do not influence the severity of downy mildew. The severity of downy mildew increases linearly with increasing population density, especially from 500 mil plants per ha^-1.

The cultivation of sugar beet (Beta vulgaris L.) for table or horticultural purposes is largely carried out in the conventional way which is characterized by intense mechanization causing soil degradation and high labor costs. New cultivation techniques are being employed in the production of vegetables aiming to ensure improvements in environmental and economic conditions, such as the no-till farming system. Thus, the objective of this work was to evaluate the vegetable classification and physicochemical characteristics of beets from different corn planting densities. The experiment was conducted in the period from October 2018 to June 2019 in the municipality of Nova Laranjeiras (PR). Corn was used as a cover plant and the vegetable used was beet cultivar Early Wonder Tall Top. The experimental design used was in interspersed blocks in unifactorial scheme (corn densities 40, 60, 80, 100 thousand plants/ha and control) with four blocks, with plots 3.60 m long and 1.20 m wide. The parameters evaluated 60 days after planting were: commercial classification (class, group, subgroup, category), length, diameter, mass, pulp firmness, soluble solids, titratable acidity, pH and ratio, phenolic compounds. Of which the variables that were not significant at 0.5 probability were length, category (defects), firmness, subgroup (flesh color), soluble solids and phenolic compounds. It is concluded that high densities of corn as mulch for SPDH of sugar beet crop negatively affect the grade and physicochemical characterization of the products.