Building cooling load depends on heat gains from the outside environment. Appropriate orientation and masonry materials play vital roles in the reduction of overall thermal loads buildings. A net-zero energy building performance has been analyzed in order to ascertain the optimum orientation and wall material properties, under the climatic conditions of Owerri, Nigeria. Standard cooling load estimation techniques were employed for the determination of the diurnal interior load variations in a building incorporating renewable energy as the major energy source, and compared with the situation in a conventionally powered building. The results show a 19.28% reduction in the building’s cooling load when brick masonry was used for the wall construction. It was observed that a higher heat gain occurred when the building faced the East-West direction than when it was oriented in the North-South direction. Significant diurnal cooling loads variation as a result of radiation through the windows was also observed, with the east facing windows contributing significantly higher loads during the morning hours while the west facing windows contributed higher amounts in the evening. The economic analysis of the net-zero energy building showed an 11.63% reduction in energy cost compared to the conventional building, with a 7-year payback period for the use of Solar PV systems. Therefore, the concept of net-zero energy building will not only help in energy conservation, but also in cost savings, and the reduction of carbon footprint in the built environment.

This paper presents a coupling of the Monte Carlo method with computational fluid dynamics (CFD) to analyze the flow channel design of an irradiated target through numerical simulations. A novel series flow channel configuration is proposed, which effectively facilitates the removal of heat generated by high-power irradiation from the target without necessitating an increase in the cooling water flow rate. The research assesses the performance of both parallel and serial cooling channels within the target, revealing that, when subjected to equivalent cooling water flow rates, the maximum temperature observed in the target employing the serial channel configuration is lower. This reduction in temperature is ascribed to the accelerated flow of cooling water within the serial channel, which subsequently elevates both the Reynolds number and the Nusselt number, leading to enhanced heat transfer efficiency. Furthermore, the maximum temperature is observed to occur further downstream, thereby circumventing areas of peak heat generation. This phenomenon arises because the cooling water traverses the target plates with the highest internal heat generation at a lower temperature when the flow channels are arranged in series, optimizing the cooling effect on these targets. However, it is crucial to note that the pressure loss associated with the serial structure is two orders of magnitude greater than that of the parallel structure, necessitating increased pump power and imposing stricter requirements on the target container and cooling water pipeline. These findings can serve as a reference for the design of the cooling channels in the target station system, particularly in light of the anticipated increase in beam power during the second phase of the China Spallation Neutron Source (CSNS Ⅱ).

 Distance education (DE) has recently become a noteworthy study topic in the public education system. From the Web of Science database, 5719 articles discussing DE and published in the period of 2011–2023 were acquired. By analyzing the overall characteristics, co-citation, and keyword co-occurrence of the selected articles, which utilized Cite Space software, the history of DE could be systematically grasped, thereby reasonably predict the emphases of future development. We found that the number of papers relevant to DE had been rapidly growing since 2018. USA, China, and Turkey are the top three countries where most authors or teams were located. The map of keyword cooccurrence showed that the previous DE research mainly focused on telelearning, adult learning, and distributed learning environment. The recent burst words emerging are used to determine that distance education will continue to be studied in the field with high explosive keywords such as visual tracking, technology acceptance model, and user interface. This will provide suggestions and directions for the development of distance education.

The urgency of adapting urban areas to the increasing impacts of climate change has prompted the scientific community to seek new approaches in partnership with public entities and civil society organizations. In Malaysia, Penang Island has developed a nature-based urban climate adaptation program (PNBCAP) seeking to increase urban resilience, reduce urban heat and flooding, strengthening social resilience, and build institutional capacity. The project includes a strong knowledge transfer component focused on encouraging other cities in the country to develop and implement adaptation policies, projects, and initiatives. This research develops a model adopting the most efficient processes to accelerate the transfer of knowledge to promote urban adaptation based on the PNBCAP. The methodology is developed based on a review of literature focused on innovation systems and change theories. The integration of success strategies in adaptation contributes to informing the creation of solutions around the alliance of local, state, and national government agencies, scientific institutions, and civil society organizations, in a new framework designated the Malaysian Adaptation Sharing Hub (MASH). MASH is structured in 3-steps and will function as an accelerator for the implementation of urban climate adaptation policies, with the target of creating 2 new adaptation-related policies to be adopted annually by each city member, based on knowledge gathered in the PNBCAP. It is concluded that, to speed up urban adaptation, it is necessary to reinforce and promote the sharing of knowledge resulting from or associated with pilot projects.

Biomimicry is increasingly being used to drive sustainable constructional development in recent years. By emulating the designs and processes of nature, biomimicry offers a wealth of opportunities to create innovative and environmentally friendly solutions. Biomimicry in industrial development: versatile applications, advantages in construction. The text emphasizes the contribution of bio-mimetic technologies to sustainability and resilience in structural design, material selection, energy efficiency, and sensor technology. Aside from addressing technical constraints and ethical concerns, we address challenges and limitations associated with adopting biomimicry. A quantitative research approach is implemented, and respondents from the construction industry rank biomimicry principles as the optimal approach to enhance sustainability in the industry. Demographic and descriptive analyses are underway. By working together, sharing knowledge, and innovating responsibly, we suggest approaches to tackle these obstacles and fully leverage the transformative power of biomimicry in promoting sustainable construction industry practices. In an evolving global environment, biomimicry reduces environmental impact and enhances efficiency, resilience, and competitiveness in construction industries.

The incorporation of artificial intelligence (AI) into language education has created new opportunities for improving the instruction and acquisition of Chinese characters. Nevertheless, the cognitive difficulties linked to the acquisition of Chinese characters, such as their intricate visual features and lack of clear meaning, necessitate thoughtful deliberation when developing AI-supported learning interventions. The objective of this project is to explore the capacity of a collaborative method between humans and machines in teaching Chinese characters, utilising the advantages of both human expertise and AI technology. We specifically investigate the utilisation of ChatGPT, a substantial language model, for the creation of instructional materials and evaluation methods aimed at teaching Chinese characters to individuals who are not native speakers. The study utilises a mixed-methods approach, which involves both qualitative examination of lesson plans created by ChatGPT and quantitative evaluation of student learning outcomes. The results indicate that the suggested framework for human-machine collaboration can successfully tackle the cognitive difficulties associated with learning Chinese characters, resulting in enhanced learner involvement and performance. Nevertheless, the research also emphasises the constraints of AI-generated material and the significance of human involvement in guaranteeing the accuracy and dependability of educational interventions. This research adds to the expanding collection of literature on AI-assisted language learning and offers practical insights for educators and instructional designers who aim to use AI tools into Chinese language curriculum. The results emphasise the necessity of employing a multi-disciplinary strategy in AI-supported language learning, incorporating knowledge from cognitive psychology, educational technology, and second language acquisition.